Scanstrut Flip Pro Plus SC-USB-F4 Bruksanvisning

Scanstrut Inte kategoriserad Flip Pro Plus SC-USB-F4

Läs gratis den bruksanvisning för Scanstrut Flip Pro Plus SC-USB-F4 (9 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 18 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 9.5 recensioner. Har du en fråga om Scanstrut Flip Pro Plus SC-USB-F4 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF
Sida 1/9
FLIP PRO PLUS - FAST CHARGE USB-A & USB-C SOCKET (SC-USB-F4)
(not illustrated)
SC-USB-F4-001 Deutsch Connector
SC-USB-F4-002 Flying Lead
17-011-2023 (Issue 1)
Installation Instructions
For further installation
and warranty information
please visit:
www.scanstrut.com
USA
+1 860 308 1416
usasales@scanstrut.com
UK & International
+44 (0)1392531280
sales@scanstrut.com
Feed barrel through the gasket and
hole.
Use drilling template to drill ø32mm
(1 1/4”) hole.
FRONT INSTALL ONLY
Draw a centre line to align template,
ensure line is square on surface and
correct orientation.
FRONT INSTALL ONLY
Drill 2 pilot holes for front t bezel.
Ø32mm
(1.25”)
3mm (0.11”) Min
25mm (1”) Max
90°
TOP
1 2 3
4
Pilot Hole Size
Material No. 6 Screw
Soft Material e.g Plywood 2.5mm (3/32”)
Hard Material e.g Fiberglass 3mm (1/8”)
Connect to 12/24V supply, ensuring a waterproof
connection. Fuse and select cable diameter according
to input voltage and current for your specic
installation.
TOP
6 5
FRONT INSTALL ONLY
Apply silicone seal on xings and pilot holes. Place the
front t bezel over charger and x bezel in place. Make
sure the bezel orientation is correct.
REAR INSTALL ONLY
Tighten lock ring onto product until
secure.
32mm (1 1/4”) Hole saw Drill
Front install only
Drill bit 2.5mm (3/32”) or
3mm (1/8”) Pozi Screwdriver
Silicone
Tool list:
USB charger Gasket Lock ring
Front install only
Front t bezel
No.6x20mm
screws
Parts list:
x1 x1
x1
x2
x1
For latest tech info visit: www.scanstrut.com/USB
READ IMPORTANT SAFETY INFORMATION BEFORE
INSTALLING.
Technical information:
Input voltage
12/24V system
10-32V DC
Input current
max
6A
Output type
(12V system) (24V system)
USB-A USB-C USB-A USB-C
5V⎓3A,
9V⎓3A,
12V⎓3A
MAX
5V⎓3A,
9V⎓3A,
12V⎓3A
MAX
5V⎓3A,
9V⎓3A,
12V⎓3A
MAX
5V⎓3A,
9V⎓3A,
12V⎓3A,
15V⎓3A,
20V⎓3A
MAX
Standby draw < 0.1W
Waterproof
rating
IPX4 front only lid closed
FLIP PRO PLUS - FAST CHARGE USB-A & USB-C SOCKET (SC-USB-F4)
(not illustrated)
SC-USB-F4-001 Deutsch Connector
SC-USB-F4-002 Flying Lead
17-011-2023 (Issue 1)
Installation Instructions
For further installation
and warranty information
please visit:
www.scanstrut.com
USA
+1 860 308 1416
usasales@scanstrut.com
UK & International
+44 (0)1392531280
sales@scanstrut.com
Feed barrel through the gasket and
hole.
Use drilling template to drill ø32mm
(1 1/4”) hole.
FRONT INSTALL ONLY
Draw a centre line to align template,
ensure line is square on surface and
correct orientation.
FRONT INSTALL ONLY
Drill 2 pilot holes for front t bezel.
Ø32mm
(1.25”)
3mm (0.11”) Min
25mm (1”) Max
90°
TOP
1 2 3
4
Pilot Hole Size
Material No. 6 Screw
Soft Material e.g Plywood 2.5mm (3/32”)
Hard Material e.g Fiberglass 3mm (1/8”)
Connect to 12/24V supply, ensuring a waterproof
connection. Fuse and select cable diameter according
to input voltage and current for your specic
installation.
TOP
6 5
FRONT INSTALL ONLY
Apply silicone seal on xings and pilot holes. Place the
front t bezel over charger and x bezel in place. Make
sure the bezel orientation is correct.
REAR INSTALL ONLY
Tighten lock ring onto product until
secure.
32mm (1 1/4”) Hole saw Drill
Front install only
Drill bit 2.5mm (3/32”) or
3mm (1/8”) Pozi Screwdriver
Silicone
Tool list:
USB charger Gasket Lock ring
Front install only
Front t bezel
No.6x20mm
screws
Parts list:
x1 x1
x1
x2
x1
For latest tech info visit: www.scanstrut.com/USB
READ IMPORTANT SAFETY INFORMATION BEFORE
INSTALLING.
Technical information:
Input voltage
12/24V system
10-32V DC
Input current
max
6A
Output type
(12V system) (24V system)
USB-A USB-C USB-A USB-C
5V⎓3A,
9V⎓3A,
12V⎓3A
MAX
5V⎓3A,
9V⎓3A,
12V⎓3A
MAX
5V⎓3A,
9V⎓3A,
12V⎓3A
MAX
5V⎓3A,
9V⎓3A,
12V⎓3A,
15V⎓3A,
20V⎓3A
MAX
Standby draw < 0.1W
Waterproof
rating
IPX4 front only lid closed
FLIP PRO PLUS - FAST CHARGE USB-A & USB-C SOCKET (SC-USB-F4)
(not illustrated)
SC-USB-F4-001 Deutsch Connector
SC-USB-F4-002 Flying Lead
17-011-2023 (Issue 1)
Installation Instructions
For further installation
and warranty information
please visit:
www.scanstrut.com
USA
+1 860 308 1416
usasales@scanstrut.com
UK & International
+44 (0)1392531280
sales@scanstrut.com
Feed barrel through the gasket and
hole.
Use drilling template to drill ø32mm
(1 1/4”) hole.
FRONT INSTALL ONLY
Draw a centre line to align template,
ensure line is square on surface and
correct orientation.
FRONT INSTALL ONLY
Drill 2 pilot holes for front t bezel.
Ø32mm
(1.25”)
3mm (0.11”) Min
25mm (1”) Max
90°
TOP
1 2 3
4
Pilot Hole Size
Material No. 6 Screw
Soft Material e.g Plywood 2.5mm (3/32”)
Hard Material e.g Fiberglass 3mm (1/8”)
Connect to 12/24V supply, ensuring a waterproof
connection. Fuse and select cable diameter according
to input voltage and current for your specic
installation.
TOP
6 5
FRONT INSTALL ONLY
Apply silicone seal on xings and pilot holes. Place the
front t bezel over charger and x bezel in place. Make
sure the bezel orientation is correct.
REAR INSTALL ONLY
Tighten lock ring onto product until
secure.
32mm (1 1/4”) Hole saw Drill
Front install only
Drill bit 2.5mm (3/32”) or
3mm (1/8”) Pozi Screwdriver
Silicone
Tool list:
USB charger Gasket Lock ring
Front install only
Front t bezel
No.6x20mm
screws
Parts list:
x1 x1
x1
x2
x1
For latest tech info visit: www.scanstrut.com/USB
READ IMPORTANT SAFETY INFORMATION BEFORE
INSTALLING.
Technical information:
Input voltage
12/24V system
10-32V DC
Input current
max
6A
Output type
(12V system) (24V system)
USB-A USB-C USB-A USB-C
5V⎓3A,
9V⎓3A,
12V⎓3A
MAX
5V⎓3A,
9V⎓3A,
12V⎓3A
MAX
5V⎓3A,
9V⎓3A,
12V⎓3A
MAX
5V⎓3A,
9V⎓3A,
12V⎓3A,
15V⎓3A,
20V⎓3A
MAX
Standby draw < 0.1W
Waterproof
rating
IPX4 front only lid closed
FLIP PRO PLUS - FAST CHARGE USB-A & USB-C SOCKET (SC-USB-F4)
(not illustrated)
SC-USB-F4-001 Deutsch Connector
SC-USB-F4-002 Flying Lead
17-011-2023 (Issue 1)
Installation Instructions
For further installation
and warranty information
please visit:
www.scanstrut.com
USA
+1 860 308 1416
usasales@scanstrut.com
UK & International
+44 (0)1392531280
sales@scanstrut.com
Feed barrel through the gasket and
hole.
Use drilling template to drill ø32mm
(1 1/4”) hole.
FRONT INSTALL ONLY
Draw a centre line to align template,
ensure line is square on surface and
correct orientation.
FRONT INSTALL ONLY
Drill 2 pilot holes for front t bezel.
Ø32mm
(1.25”)
3mm (0.11”) Min
25mm (1”) Max
90°
TOP
1 2 3
4
Pilot Hole Size
Material No. 6 Screw
Soft Material e.g Plywood 2.5mm (3/32”)
Hard Material e.g Fiberglass 3mm (1/8”)
Connect to 12/24V supply, ensuring a waterproof
connection. Fuse and select cable diameter according
to input voltage and current for your specic
installation.
TOP
6 5
FRONT INSTALL ONLY
Apply silicone seal on xings and pilot holes. Place the
front t bezel over charger and x bezel in place. Make
sure the bezel orientation is correct.
REAR INSTALL ONLY
Tighten lock ring onto product until
secure.
32mm (1 1/4”) Hole saw Drill
Front install only
Drill bit 2.5mm (3/32”) or
3mm (1/8”) Pozi Screwdriver
Silicone
Tool list:
USB charger Gasket Lock ring
Front install only
Front t bezel
No.6x20mm
screws
Parts list:
x1 x1
x1
x2
x1
For latest tech info visit: www.scanstrut.com/USB
READ IMPORTANT SAFETY INFORMATION BEFORE
INSTALLING.
Technical information:
Input voltage
12/24V system
10-32V DC
Input current
max
6A
Output type
(12V system) (24V system)
USB-A USB-C USB-A USB-C
5V⎓3A,
9V⎓3A,
12V⎓3A
MAX
5V⎓3A,
9V⎓3A,
12V⎓3A
MAX
5V⎓3A,
9V⎓3A,
12V⎓3A
MAX
5V⎓3A,
9V⎓3A,
12V⎓3A,
15V⎓3A,
20V⎓3A
MAX
Standby draw < 0.1W
Waterproof
rating
IPX4 front only lid closed
FLIP PRO PLUS - FAST CHARGE USB-A & USB-C SOCKET (SC-USB-F4)
(not illustrated)
SC-USB-F4-001 Deutsch Connector
SC-USB-F4-002 Flying Lead
17-011-2023 (Issue 1)
Installation Instructions
For further installation
and warranty information
please visit:
www.scanstrut.com
USA
+1 860 308 1416
usasales@scanstrut.com
UK & International
+44 (0)1392531280
sales@scanstrut.com
Feed barrel through the gasket and
hole.
Use drilling template to drill ø32mm
(1 1/4”) hole.
FRONT INSTALL ONLY
Draw a centre line to align template,
ensure line is square on surface and
correct orientation.
FRONT INSTALL ONLY
Drill 2 pilot holes for front t bezel.
Ø32mm
(1.25”)
3mm (0.11”) Min
25mm (1”) Max
90°
TOP
1 2 3
4
Pilot Hole Size
Material No. 6 Screw
Soft Material e.g Plywood 2.5mm (3/32”)
Hard Material e.g Fiberglass 3mm (1/8”)
Connect to 12/24V supply, ensuring a waterproof
connection. Fuse and select cable diameter according
to input voltage and current for your specic
installation.
TOP
6 5
FRONT INSTALL ONLY
Apply silicone seal on xings and pilot holes. Place the
front t bezel over charger and x bezel in place. Make
sure the bezel orientation is correct.
REAR INSTALL ONLY
Tighten lock ring onto product until
secure.
32mm (1 1/4”) Hole saw Drill
Front install only
Drill bit 2.5mm (3/32”) or
3mm (1/8”) Pozi Screwdriver
Silicone
Tool list:
USB charger Gasket Lock ring
Front install only
Front t bezel
No.6x20mm
screws
Parts list:
x1 x1
x1
x2
x1
For latest tech info visit: www.scanstrut.com/USB
READ IMPORTANT SAFETY INFORMATION BEFORE
INSTALLING.
Technical information:
Input voltage
12/24V system
10-32V DC
Input current
max
6A
Output type
(12V system) (24V system)
USB-A USB-C USB-A USB-C
5V⎓3A,
9V⎓3A,
12V⎓3A
MAX
5V⎓3A,
9V⎓3A,
12V⎓3A
MAX
5V⎓3A,
9V⎓3A,
12V⎓3A
MAX
5V⎓3A,
9V⎓3A,
12V⎓3A,
15V⎓3A,
20V⎓3A
MAX
Standby draw < 0.1W
Waterproof
rating
IPX4 front only lid closed
FLIP PRO PLUS - FAST CHARGE USB-A & USB-C SOCKET (SC-USB-F4)
(not illustrated)
SC-USB-F4-001 Deutsch Connector
SC-USB-F4-002 Flying Lead
17-011-2023 (Issue 1)
Installation Instructions
For further installation
and warranty information
please visit:
www.scanstrut.com
USA
+1 860 308 1416
usasales@scanstrut.com
UK & International
+44 (0)1392531280
sales@scanstrut.com
Feed barrel through the gasket and
hole.
Use drilling template to drill ø32mm
(1 1/4”) hole.
FRONT INSTALL ONLY
Draw a centre line to align template,
ensure line is square on surface and
correct orientation.
FRONT INSTALL ONLY
Drill 2 pilot holes for front t bezel.
Ø32mm
(1.25”)
3mm (0.11”) Min
25mm (1”) Max
90°
TOP
1 2 3
4
Pilot Hole Size
Material No. 6 Screw
Soft Material e.g Plywood 2.5mm (3/32”)
Hard Material e.g Fiberglass 3mm (1/8”)
Connect to 12/24V supply, ensuring a waterproof
connection. Fuse and select cable diameter according
to input voltage and current for your specic
installation.
TOP
6 5
FRONT INSTALL ONLY
Apply silicone seal on xings and pilot holes. Place the
front t bezel over charger and x bezel in place. Make
sure the bezel orientation is correct.
REAR INSTALL ONLY
Tighten lock ring onto product until
secure.
32mm (1 1/4”) Hole saw Drill
Front install only
Drill bit 2.5mm (3/32”) or
3mm (1/8”) Pozi Screwdriver
Silicone
Tool list:
USB charger Gasket Lock ring
Front install only
Front t bezel
No.6x20mm
screws
Parts list:
x1 x1
x1
x2
x1
For latest tech info visit: www.scanstrut.com/USB
READ IMPORTANT SAFETY INFORMATION BEFORE
INSTALLING.
Technical information:
Input voltage
12/24V system
10-32V DC
Input current
max
6A
Output type
(12V system) (24V system)
USB-A USB-C USB-A USB-C
5V⎓3A,
9V⎓3A,
12V⎓3A
MAX
5V⎓3A,
9V⎓3A,
12V⎓3A
MAX
5V⎓3A,
9V⎓3A,
12V⎓3A
MAX
5V⎓3A,
9V⎓3A,
12V⎓3A,
15V⎓3A,
20V⎓3A
MAX
Standby draw < 0.1W
Waterproof
rating
IPX4 front only lid closed
17-011-2023 (Issue 1)
FLIP PRO PLUS
-
FAST CHARGE USB-A
&
USB-C SOCKET (SC-USB-F4)
(not iustrate
 

Technical information:
I
Input voltage


Input current

max
 
   
Output type
  


  

  

M M M


Standby draw 
Waterproof

rating



 
�

Installation Instructions





 



Produktspecifikationer

Varumärke: Scanstrut
Kategori: Inte kategoriserad
Modell: Flip Pro Plus SC-USB-F4

Behöver du hjälp?

Om du behöver hjälp med Scanstrut Flip Pro Plus SC-USB-F4 ställ en fråga nedan och andra användare kommer att svara dig


Inte kategoriserad Scanstrut Manualer

Scanstrut

Scanstrut RA-01 Bruksanvisning

21 Februari 2025
Scanstrut

Scanstrut TP-01 Bruksanvisning

21 Februari 2025
Scanstrut

Scanstrut TB-01 Bruksanvisning

21 Februari 2025
Scanstrut

Scanstrut Scanpod SPH-3I-W Bruksanvisning

31 Januari 2025
Scanstrut

Scanstrut RL-RM Bruksanvisning

31 Januari 2025
Scanstrut

Scanstrut SPT1001 Bruksanvisning

31 Januari 2025
Scanstrut

Scanstrut PTM-R2-SL Bruksanvisning

31 Januari 2025
Scanstrut

Scanstrut RLS-508-404 Bruksanvisning

31 Januari 2025
Scanstrut

Scanstrut CAM-PT-150-01 Bruksanvisning

29 Januari 2025
Scanstrut

Scanstrut CAM-PT-150-02 Bruksanvisning

29 Januari 2025

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer

Planet

Planet PWR-240-48 Bruksanvisning

9 April 2025
CaterChef

CaterChef 445001 Bruksanvisning

9 April 2025
Daikin

Daikin EKWCTRDI1V3 Bruksanvisning

9 April 2025
Simplified MFG

Simplified MFG SP18CAT120 Bruksanvisning

9 April 2025
AudioQuest

AudioQuest Pegasus Bruksanvisning

9 April 2025
Reolink

Reolink P330 Bruksanvisning

9 April 2025
Reolink

Reolink NVS16-8MB8 Bruksanvisning

9 April 2025
Drive Medical

Drive Medical RTL12045 Bruksanvisning

9 April 2025
Kern

Kern MBC-A05 Bruksanvisning

9 April 2025
Daikin

Daikin EKEXVA250 Bruksanvisning

9 April 2025