Scanstrut SC-CW-06E Bruksanvisning


Läs gratis den bruksanvisning för Scanstrut SC-CW-06E (2 sidor) i kategorin Batteriladdare. Guiden har ansetts hjälpsam av 16 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 8.5 recensioner. Har du en fråga om Scanstrut SC-CW-06E eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/2
1
Choose mounting location ensuring there is adequate
space behind mounting surface.
2
Cut out hole and drill pilot holes using paper template.
3
Install wireless charger SC-CW-01E using p1-x3 3mm x 10mm
pan head Philips thread forming screws provided.
Input voltage range : 10-30V DC (12/24V system)
Input current max: 1.5A
Standby current draw: < 0.03W
Certications: Qi, CE, FCC, ROHS
Waterproof rating: IPX6 front and back
Max panel thickness
16mm
(0.63")
25mm
(0.98")
157mm
(6.18")
Max phone size: 176mm (6.92”) x 92mm (3.62”)
(Including case)
4
Technical Information
READ THE IMPORTANT SAFETY INFORMATION
LEAFLET BEFORE INSTALLING
Charge/Storage pocket
Wireless charger SC-CW-01E
**Caution**
Do not over tighten.
Tools Required
Jigsaw
Philips No. 2
screwdriver
Silicone Sealant
SC-CW-01E-005
Wireless Charger
Powerdrill
Drain Pipe 8mm (5/16”)
internal diameter
(Optional, not included)
Drill bits
5mm (3/16”)
2.5mm (3/32”)
3mm (1/8”)
x1
Parts List
Pocket
x1
x4
x5
x1
Front bezel
No6 (3.5mm) x 3/4” (19mm)
self-tapping CSK
Philips screw
3 x 10mm Pan head
Philips Thread forming
screw
x1
Installation Instructions
ROKK Wireless - Nest. (SC-CW-06E)
17-09-2020 Issue 2
Optional Drain Pipe: Carefully drill drain holes using 5mm
(3/16”) drill bit. Attach drain pipe 8mm (5/16”) ID pipe, not
included.


Produktspecifikationer

Varumärke: Scanstrut
Kategori: Batteriladdare
Modell: SC-CW-06E

Behöver du hjälp?

Om du behöver hjälp med Scanstrut SC-CW-06E ställ en fråga nedan och andra användare kommer att svara dig