SCG T8 Bruksanvisning

SCG Stativ T8

Läs gratis den bruksanvisning för SCG T8 (5 sidor) i kategorin Stativ. Guiden har ansetts hjälpsam av 21 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 11 recensioner. Har du en fråga om SCG T8 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/5
Camera Plate Lock
Spare Camera Screw
Tilt Lock
Tilt Drag Selector
Level Bubble Battery
Tray
Pan Drag Selector
Camera Screws
Camera Plate
Safety Release for Cam-
era Plate
Counterbalance Selector
Illuminated Bubble Level
LED Button for Bubble
1. Safety Instructions
Please use this manual to familiarise yourself with the operation of the T8 Fluid Head and observe these
instructions to prevent any damage to your equipment. Ensure that all equipment is operating correctly
and free from defects and damage, also please ensure that the tripod is steady, secure and that the bowl
is approximately horizontal when attaching the camera. The operator is responsible for the safe operation
of this piece of equipment.
Do not exceed the safety payload capacity of the Fluid Head.
Do not leave the camera unattended on the Fluid Head.
Do not release the CAMERA PLATE LOCK whilst the camera is at an angle.
Do not adjust the tripod whilst the camera is attached to the Fluid Head.
Ensure PANBAR LOCK is securely tightened.
Apply TILT LOCK when adding/removing equipment from the camera or when attaching/removing the
camera from the Fluid Head.
Hold camera securely whilst changing Counterbalance, Pan Drag or Tilt Drag settings.
Hold the camera securely whilst releasing the SAFETY RELEASE LEVER.


Produktspecifikationer

Varumärke: SCG
Kategori: Stativ
Modell: T8

Behöver du hjälp?

Om du behöver hjälp med SCG T8 ställ en fråga nedan och andra användare kommer att svara dig