Scotsman Prodigy Plus FS2330 Bruksanvisning

Scotsman Inte kategoriserad Prodigy Plus FS2330

Läs gratis den bruksanvisning för Scotsman Prodigy Plus FS2330 (20 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 7 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 4 recensioner. Har du en fråga om Scotsman Prodigy Plus FS2330 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/20
Installation and Users Manual for
Modular Flake and Nugget Ice Machines
Prodigy Plus A Series Models
NH2030, NS2030, FS2330
Water Cooled and Remote Air Cooled
NH2030, NS2030, FS2330
A Series Water and Remote User Manual
November 2020
Page 1
Introduction
This ice machine is the result of years of experience
with aked and nugget ice machines. The latest in
electronics has been coupled with the time tested
Scotsman aked ice system to provide reliable ice
making and the features needed by customers. The
features include easily accessible air lters, simple
conductivity water level sensing, evaporator clearing
at shut down, photo-eye sensing bin control and the
ability to add options.
Contents
Installation: ..................................................................... 2
Location: ....................................................................... 3
Cabinet Layout .................................................................. 4
Unpacking & Install Prep ........................................................... 5
Water - Remote or Water Cooled .................................................... 6
Electrical ....................................................................... 7
Refrigeration - Remote Condenser Models ............................................. 8
Remote Condenser Location - Limits ................................................. 9
For The Installer: Remote Condenser ................................................. 10
Line Set Routing and Brazing ....................................................... 11
Final Check List .................................................................. 13
Initial Start Up and Maintenance ..................................................... 14
Maintenance: Scale Removal and Sanitation ........................................... 15
Maintenance: Scale Removal and Sanitation Continued .................................. 16
Options ........................................................................ 17
What to Do Before Calling for Service ................................................. 18
NH2030, NS2030, FS2330
A Series Water and Remote User Manual
November 2020
Page 2
Installation:
This machine is designed to be used indoors, in a
controlled environment. Operation outside the limits
listed here will void the warranty.
Air temperature limits
Minimum Maximum
Ice maker 50
o
F. 100
o
F.
Remote
condenser
-20
o
F. 120
o
F.
Water temperature limits
Minimum Maximum
All models 40
o
F. 100
o
F.
Water pressure limits (potable)
Maximum Minimum
All models 20 psi 80 psi
Water pressure limit to water cooled condenser is 150
PSI
Voltage limits
Minimum Maximum
208-230 60 Hz 198 253
Minimum conductivity (RO water)
10 microSiemens / CM
Water Quality (ice making circuit)
Potable
The quality of the water supplied to the ice machine
will have an impact on the time between cleanings
and ultimately on the life of the product. Water can
contain impurities either in suspension or in solution.
Suspended solids can be ltered out. In solution
or dissolved solids cannot be ltered, they must be
diluted or treated. Water lters are recommended
to remove suspended solids. Some lters have
treatment in them for dissolved solids.
Check with a water treatment service for a
recommendation.
RO water. This machine can be supplied with Reverse
Osmosis water, but the water conductivity must be no
less than 10 microSiemens/cm.
Potential for Airborne Contamination
Installing an ice machine near a source of yeast
or similar material can result in the need for more
frequent sanitation cleanings due to the tendency of
these materials to contaminate the machine.
Most water lters remove chlorine from the water
supply to the machine which contributes to this
situation. Testing has shown that using a lter that
does not remove chlorine, such as the Scotsman
Aqua Patrol, will greatly improve this situation.
Warranty Information
The warranty statement for this product is provided
separately from this manual. Refer to it for applicable
coverage. In general warranty covers defects
in material or workmanship. It does not cover
maintenance, corrections to installations, or situations
when the machine is operated in circumstances that
exceed the limitations printed above.
NH2030, NS2030, FS2330
A Series Water and Remote User Manual
November 2020
Page 3
Location:
While the machine will operate satisfactorily within the
air and water temperature limits, it will operate more
e󰀩ciently when those temperatures are nearer the
lower limits. Avoid locations that are hot, dusty, greasy
or conned.
Options
Ice is made until it lls the bin enough to block an
infrared light beam inside the base of the machine. A
eld installed kit is available to adjust the maintained
ice level lower. The kit number is KVS.
The standard controller has excellent diagnostic
capabilities and communicates to the user through the
AutoAlert light panel, seen through the front panel.
Field installed kits are available that can log data and
provide additional information when the front panel is
removed. That kit number is KSBU. A similar kit adds
network connectivity, and its number is KSBU-N.
Bin Compatibility
All models have the same footprint: 30 inches wide
by 24 inches deep. Conrm available space when
replacing a prior model.
Bin & Adapter List
B330P or B530P or B530S – Direct t, no adapter
needed
B842S – KBT22
B948S – KBT28
BH1100, BH1300 and BH1600 – upright bins
include ller panels to accommodate a single 30”
wide ice machine. No adapter is needed.
BH1300 and BH1600 – KBT54 for two 30” units side
by side
Dispenser Compatibility
Only nugget ice models may be used with ice
dispensers. Flaked ice is not dispensable.
ID200 – use KBT44 and KNUGDIV and KVS
ID250 – use KBT44 and KNUGDIV and KVS
See sales literature for other brand model ice and
beverage dispenser applications.
Other Bins & Applications
Note the drop zone and ultrasonic sensor locations in
the illustrations on the next pages.
Scotsman ice systems are designed and
manufactured with the highest regard for safety and
performance.
Scotsman assumes no liability of responsibility of
any kind for products manufactured by Scotsman
that have been altered in any way, including the use
of any part and/or other components not specically
approved by Scotsman.
Scotsman reserves the right to make design changes
and/or improvements at any time. Specications and
design are subject to change without notice.
NH2030, NS2030, FS2330
A Series Water and Remote User Manual
November 2020
Page 4
Cabinet Layout
76.2
30.00
73.8
29.06
78
30.70
0.3
.12
CHUTE
EXTENTION
4
1.59
4.7
1.85
62.6
24.64
32.3
12.71
6.4
2.50
.88
ELECTRICAL
CONNECTION
55.7
21.92
7.5
2.94
38.6
15.20
3.9
1.52
3/8" FLARE
MACHINE
WATER
INLET
3/4" FPT
MACHINE WATER
DRAIN
REMOTE COND.
LIQUID LINE
3/8" COPPER
BRAZE JOINT
REMOTE COND.
DISCHARGE LINE
1/2" COPPER
(REMOTE ONLY)
BRAZE JOINT
REMOTE LOW SIDE
SUCTION LINE
3/4" COPPER
(LOW SIDE ONLY)
BRAZE JOINT
33
13.00
10.2
4.00
TYP. (2)
4.2
1.65
19.3
7.60
TYP (2)
29.3
11.55
29.1
11.46
22.8
8.96
32.2
12.68
OPTIONAL BIN STAT
OR ULTRA SONIC
BIN LEVEL SENSOR
ICE DROP
OPENING
ICE DROP
OPENING
61
24.00
0.6
.23
12.4
4.88
31.8
12.52
5.3
2.09
10.4
4.09
4
1.59
4.7
1.85
55.8
21.95
7.5
2.94
.88
ELECTRICAL
CONNECTIONS
38.6
15.20
3.9
1.52
1/2" FPT
CONDENSER DRAIN
3/8" FPT
CONDENSER
WATER INLET
3/4" FPT
MACHINE WATER
DRAIN
3/8" FLARE
MACHINE
WATER
INLET
REMOTE
BACK VIEW
FRONT VIEW
RIGHT SIDE VIEW
PLAN VIEW
WATER COOLED
BACK VIEW


Produktspecifikationer

Varumärke: Scotsman
Kategori: Inte kategoriserad
Modell: Prodigy Plus FS2330

Behöver du hjälp?

Om du behöver hjälp med Scotsman Prodigy Plus FS2330 ställ en fråga nedan och andra användare kommer att svara dig