Sharp SKMD30E3DS Bruksanvisning

Sharp Magnetron SKMD30E3DS

Läs gratis den bruksanvisning för Sharp SKMD30E3DS (12 sidor) i kategorin Magnetron. Guiden har ansetts hjälpsam av 12 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 6.5 recensioner. Har du en fråga om Sharp SKMD30E3DS eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/12
E 1
30" EXTENSION KIT: SKMD30E9ES INSTALLATION INSTRUCTIONS
IMPORTANT NOTES TO THE INSTALLER
Read all of the Installation Manual that is included with the Microwave Drawer before installing the extension kit.
Observe all governing codes, ordinances, and safety instructions.
Be sure to leave these instructions with the consumer.
Parts included:
Left Side Trim (qty. 1) Right Side Trim (qty. 1) Mounting Brackets (qty. 2)
Bracket Screws (qty. 8)
Trim Screws (qty. 4)
Install the extension kit after properly installing the microwave drawer in the cabinet. See steps below.
Note that the side trims are marked "L" and "R" on the back side.
T I N S KB 28 9M R R 0
MICROWAVE DRAWER STANDARD MOUNT, MEASUREMENTS AND INSTALLATION INSTRUCTIONS
D
G
A
B
C
H
I
F
E
JA. 215/8" (549.28 mm)
B. 411 /16" (119.06 mm)
C. 13/4" (44.45 mm)
D. 217/8" (555.63 mm)
E. 235/8" (600.07 mm)
F. 16" (406.4 mm)
G. 1419/ " (370.68 mm)32
H. 117/ " (38.89 mm) door thickness32
I. 15" (381 mm) auto drawer opening
J. 4" (101.60 mm)
Figure 1


Produktspecifikationer

Varumärke: Sharp
Kategori: Magnetron
Modell: SKMD30E3DS

Behöver du hjälp?

Om du behöver hjälp med Sharp SKMD30E3DS ställ en fråga nedan och andra användare kommer att svara dig