Sherwood CDC-5506 Bruksanvisning
Sherwood
CD-spelare/brännare
CDC-5506
Läs nedan 📖 manual på svenska för Sherwood CDC-5506 (18 sidor) i kategorin CD-spelare/brännare. Denna guide var användbar för 14 personer och betygsatt med 4.9 stjärnor i genomsnitt av 7.5 användare
Sida 1/18


2
Introduction
: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
This symbol is intended to alert the user to the presence of
uninsulated "dangerous voltage" within the product's
enclosure that may be of sufficient magnitude to constitute
a risk of electric shock to persons.
This symbol is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
CAUTION
WARNING
Units shipped to Australia are designed for operation on 230 V AC only.
To ensure safe operation, the three-pin plug supplied must be inserted only into a standard three-
pin power point which is effectively earthed through the normal household wiring. Extension cords
used with the equipment must be three-core and be correctly wired to provide connection to earth.
Improper extension cords are a major cause of fatalities. The fact that the equipment
operates satisfactorily does not imply that the power point is earthed and that the installation
is completely safe. For your safety, if in any doubt about the effective earthing of the power
point, consult a qualified electrician.
PAN-EUROPEAN UNIFIED VOLTAGE
All units are suitable for use on supplies 220-240 V AC.
FOR YOUR SAFETY
EUROPE
AUSTRALIA
220 V
-
240 V
READ THIS BEFORE OPERATING YOUR UNIT
CAUTION
Invisible laser radiation when the unit is open.
Do not stare into beam.
CAUTION : USE OF ANY CONTROLS, ADJUSTMENTS, OR PROCEDURES OTHER THAN THOSE SPECIFIED
HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
CLASS 1
LASER PRODUCT
ENGLISH

CAUTION
• Leave a space around the unit for sufficient ventilation.
• Avoid installation in extremely hot or cold locations, or in an area
that is exposed to direct sunlight or heating equipment.
• Keep the unit free from moisture, water, and dust.
• Do not let foreign objects in the unit.
• The ventilation should not be impeded by covering the ventilation
openings with items, such as newspapers, table-cloths, curtains,
etc.
• No naked flame sources, such as lighted candles, should be
placed on the unit.
• Please be care the environmental aspects of battery disposal.
• The unit shall not be exposed to dripping or splashing for use.
• No objects filled with liquids, such as vases, shall be placed on
the unit.
• Do not let insecticides, benzene, and thinner come in contact
with the set.
• Never disassemble or modify the unit in any way.
■Notes on the AC power cord and the wall outlet.
• The unit is not disconnected from the AC power source(mains)
as long as it is connected to the wall outlet, even if the unit has
been turned off.
• To completely disconnect this product from the mains,
disconnect the plug from the wall socket outlet.
• When setting up this product, make sure that the AC outlet you
are using is easily accessible.
• Disconnect the plug from the wall outlet when not using the unit
for long periods of time.
Information for Users on Collection and Disposal of
Old Equipment and used Batteries
These symbols on the products, packaging, and/or
accompanying documents mean that used electrical and
electronic products and batteries should not be mixed
with general household waste. For proper treatment,
recovery and recycling of old products and used
batteries, please take them to applicable collection
points, in accordance with your national legislation.
By disposing of these products and batteries correctly,
you will help to save valuable resources and prevent any
potential negative effects on human health and the
environment which could otherwise arise from
inappropriate waste handling.
For more information about collection and recycling of
old products and batteries, please contact your local
municipality, your waste disposal service or the point of
sale where you purchased the items.
[Information on Disposal in other Countries outside the
European Union]
These symbols are only valid in the European Union. If
you wish to discard these items, please contact your
local authorities or dealer and ask for the correct method
of disposal.
Note for the battery symbol (bottom two symbol
examples):
The sign Pb below the symbol for batteries indicates that
this batteries contains lead.
PRECAUTIONS
■Moisture condensation
Moisture may form on the lens in the following conditions.
• Immediately after a heater has been turned on.
• In a steamy or very humid room.
• When this unit is moved from a cold place to a warm one.
If moisture forms inside this unit, it may not operate properly.
In this case, turn on the power and wait about one hour for the moisture to evaporate.
■If there is noise interference on the TV while a broadcast is being received.
Depending on the reception condition of the TV, interference may appear on the TV screen while you are watching a TV
broadcast and this unit is left on. This is not a malfunction of this unit or the TV. To watch a TV broadcast, turn off this unit.
■Do not transport this unit with discs left in it.
■Do not place on the component such as amplifier or receiver that generates heat.
If so, the temperature inside this unit rises and malfunction may occur.
3
ENGLISH

4
CONTENTS
Introduction
• READ THIS BEFORE OPERATING YOUR UNIT I 2
Rear Panel Connections 5 I
Front Panel & Remote Controls 6I
• REMOTE CONTROL OPERATION RANGE I 9
• LOADING BATTERIES I 9
Preliminary Knowledge About Discs & Files
• PLAYABLE DISCS I 10
• USB MEMORY DEVICES I 10
• PLAYABLE AUDIO FILE FORMATS I 10
• CARE AND HANDLING OF DISCS I 10
Operations
• PLAYING TRACKS/FILES I 11
• PLAYING IN RANDOM ORDER I 13
• REPEAT PLAY I 13
• PLAYING THE FIRST 10 SECONDS OF EACH TRACK/FILE I 14
• PLAYING IN DESIRED ORDER I 14
• SELECTING A TIME DISPLAY (Audio CD only) I 16
• ADJUSTING THE BRIGHTNESS OF THE FLUORESCENT DISPLAY I 16
• LISTENING WITH HEADPHONES I 16
Troubleshooting Guide 17I
Specifications 18I
ENGLISH

5
POWER SOURCE
POWER CONSUMPT ION
5DISC CD CHANGER
CDC-5506
230V 50Hz
23 W
DESIGNED IN US A
ASS EMBLED IN CHINA
DIGITAL
OPT
ANALOG
L
R
DIGI LINK
SN.
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
N18041
A VIS : RISQUE DE CHOC ELECTRIQUE- NE PAS OUVRIR.
WARNING : SHOCK HAZARD-DO NOT OPEN.
45
Rear Panel Connections
• Do not plug the AC input cord into the AC outlet when making connections.
• Be sure to connect the white plugs to the L(Left) jacks and the red plugs to the R (Right) jacks when making
connections.
• Refer to the connecting diagram in the operating instructions of your amplifier/receiver
• Connect the ANALOG L and R jacks to the CD IN jacks of
your amplifier/receiver.
1. CONNECTING ANALOG AUDIO OUTS
• Connect this jack to the DIGILINK jack of Sherwood system
amplifier/receiver to control this unit remotely by DIGILINK II
or III system. (For details, refer to the operating instructions of
Sherwood amplifier/receiver.)
■Note :
• The DIGILINK operation may not work on some Sherwood
components.
2. CONNECTING DIGILINK
• Connect this jack to the OPTICAL DIGITAL IN jack of your
amplifier/receiver to enjoy digital sound.
■Notes :
• It is not recommended to record digital audio signals with
digital audio connection between this unit and MD or CD
recorder, etc.. When recording the sounds played on this unit,
record them through the ANALOG AUDIO OUT jacks.
3. CONNECTING OPTICAL DIGITAL OUT
• Plug the cord into a wall AC outlet.
4. AC INPUT CORD
• This terminal may be used in the future to update the operating software, etc.
■Note :
• Programming for upgrade requires specialized programming knowledge and for that reason we recommend that it only be
done by qualified installers.
5. TERMINAL FOR UPGRADE
ANALOG
L
R
Amplifier/receiver
CD IN
Sherwood amplifier/receiver
DIGILINK
DIGI LINK
DIGITAL
OPT Amplifier/receiver
OPTICAL IN
• Some of the commercially available optical fiber cords cannot be used for the equipment. If there is an optical fiber cord which
cannot be connected to your equipment, consult your dealer or nearest service organization.
ENGLISH

Front Panel & Remote Controls
5 D CD CH ANGISC ER CDC-5506
POWER
DISC SELECT OR
1 2 3 4 5 DISC SKIP OPE N / CLOSE
PHONES
USB
5V 500mA
ON O FF
5 DIS U T OM IC L OAD ING S Y ST E MC A AT
O N/ST ANDBY
INT RO
DIMMERCD/USB T IME
P ROGRAM RANDOM
REPEAT
1
20 16 18 19 17 13 14 10 11 12 9 25 8
2 532423 7 4
2
13
d
16
15 22
20
e
f
17
21
6
b
a
c
10
18
14
Front panel controls
Remote controls
6
ENGLISH

Preliminary Knowledge About Discs & Files
PLAYABLE DISCS
This unit supports the following discs.
• This unit supports CD-R and CD-RW discs recorded in
Audio CD(CD-DA) format, MP3 or WMA format.
• Only CD-R and CD-RW discs recorded with ISO9660
format can be played back.
• This unit supports multi-session discs. Some multi-session
discs may take a long time to load and some may not be
loaded at all.
■Unplayable discs
• Since this unit cannot support disc types, formats and file
types not listed above, do not play such discs.
• Some CD-R and CD-RW discs cannot be played due to
incomplete disc finalization, recording quality or physical
condition of the disc, characteristics of recording device or
authoring software, etc.
See the operating instructions supplied with your recording
device for more information.
• Some Audio CDs use copy protection that doesn’t
conform to the official CD standard. Since these are
nonstandard discs, this unit cannot play them properly.
• When an Audio CD recorded in DTS-ES or Dolby Digital
EX is played, noise may be heard.
Disc Logo Format or file type
PCM
Audio CD, MP3, WMA
Audio CD, MP3, WMA
■WMA(Windows Media Audio)
• Sampling frequency : 32, 44.1, 48 kHz
• Bit rate : 32 ~ 320 kbps
• Extension : .wma, .WMA
• WMA Tag is not available
• Windows Media and the Windows logo are trademarks or
registered trademarks of Microsoft Corporation in the United States
and/or other countries.
■Notes :
• Folders can be up to ten levels deep.
• For some files, it may not be possible to use certain functions
during playback.
• Files protected by DRM(Digital Rights Management) cannot be
played.
• When the data of file and folder names is larger than the unit’s
memory capacity, some files, etc. cannot be recognized and
played.
USB MEMORY DEVICES
• An USB memory device can be connected to the USB
connector on the front panel to play MP3 or WMA files
stored on it.
• Only USB memory devices conforming to mass storage
class and MTP(Media Transfer Protocol) standards can be
played on this unit.
• Thin unit supports FAT16 or FAT32 file format system for
USB memory divece.
PLAYABLE AUDIO FILE FORMATS
■MP3(MPEG-1 Audio Layer-3)
• Sampling frequency : 32, 44.1, 48 kHz
• Bit rate : 32 ~ 320 kbps
• Extension : .mp3, .MP3
• Fixed bit-rate files are recommended. Variable bit-rate
(VBR) fiels are playable, but playing time may be
displayed incorrectly.
• ID3 Tag is not avaliable.
• MPEG Layer-3 audio coding technology licensed from
Fraunhofer IIS and Thomson.
10
CARE AND HANDLING OF DISCS
5 D CD CHANGISC ER CDC -5506
POWER
DISC SELECTOR
1 2 3 4 5 DISC SKIP OPEN/ CLOSE
PHONES
USB
5V 500mA
ON OFF
5 DIS UTOM I C LOADING SYST EMC A AT
ON/STANDBY INTRO
DIMMERCD/USB TIME
PROGRAM RANDOM
REPEAT
Printed sideTray
• In handling a disc, hold it carefully
with edges.
• Do not stick paper or write
anything on the printed surface.
• Finger marks and dust on the
recorded surface should be
carefully wiped off with a soft cloth.
Wipe straight from the inside to the
outside of the disc.
• Always keep the discs in their
cases after use to protect them
from dust and scratches.
• Do not use a cracked, deformed, or repaired disc.
These discs are easily broken and may cause serious
personal injury and apparatus malfunction.
■Notes:
• Do not expose discs to direct sunlight, high humidity or
high temperature for a long time.
• When loading or unloading a disc in the disc tray, always
place it with the printed side up.
ENGLISH
Produktspecifikationer
Varumärke: | Sherwood |
Kategori: | CD-spelare/brännare |
Modell: | CDC-5506 |
Behöver du hjälp?
Om du behöver hjälp med Sherwood CDC-5506 ställ en fråga nedan och andra användare kommer att svara dig
CD-spelare/brännare Sherwood Manualer

19 September 2024

19 September 2024
CD-spelare/brännare Manualer
- CD-spelare/brännare Citronic
- CD-spelare/brännare S.M.S.L
- CD-spelare/brännare Omnitronic
- CD-spelare/brännare Creek
- CD-spelare/brännare Audiosonic
- CD-spelare/brännare Atoll
- CD-spelare/brännare Lenoxx
- CD-spelare/brännare JBL
- CD-spelare/brännare McIntosh
- CD-spelare/brännare JVC
- CD-spelare/brännare GPO
- CD-spelare/brännare GPX
- CD-spelare/brännare Clatronic
- CD-spelare/brännare Apart
- CD-spelare/brännare Technisat
Nyaste CD-spelare/brännare Manualer

5 April 2025

10 Mars 2025

5 Mars 2025

20 Februari 2025

20 Februari 2025

20 Februari 2025

20 Februari 2025

20 Februari 2025

20 Februari 2025

20 Februari 2025