Shure RMCE-BT2 Bruksanvisning
Shure
bluetooth musik mottaggare
RMCE-BT2
Läs gratis den bruksanvisning för Shure RMCE-BT2 (7 sidor) i kategorin bluetooth musik mottaggare. Guiden har ansetts hjälpsam av 4 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 2.5 recensioner. Har du en fråga om Shure RMCE-BT2 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/7
1/7
BT2 -- Shure Bluetooth® Earphones
Bluetooth Pairing
1. Turn off the earphones. Press and hold the center button on the earphone remote until the LED flashes blue
and red.
2. From your audio source, select "Shure BT2."
3. When successfully paired, the LED turns blue.
Note: If the pairing fails on the first attempt, repeat the process from the beginning.
For additional pairing methods, please visit http://www.shure.com/earphones (http://www.shure.com/earphones).
The best sound starts with a good fit
•Select the sleeve that provides a snug fit (like earplugs).
•Secure the cable behind the ear to maintain a tight seal.
To keep them sounding their best...
•Clean regularly to remove debris and deposits.
Shure Incorporated
2/7
•Contact Shure Service and Repair to replace damaged product. Simply detach and return the broken earpiece
for easy replacement.
Changing Sleeves
•Gently twist and pull to remove sleeve.
•Install the new sleeve so it completely covers the barb and nozzle.
Visit http://www.shure.com/earphones (http://www.shure.com/earphones) for replacement parts and important in
structions on cleaning and maintenance.
Using the Remote
The Center Button
Power on Press and hold
Power off Press and hold, 5 seconds
Pair Bluetooth Turn off the earphones. Press and hold, 7 seconds
Play/Pause Click once
Answer/End a call Click once
Decline a call Press and hold, 3 seconds
Activate voice assistant Phone on, press and hold, 3 seconds
Factory Reset Turn off the earphones and plug into a charger.
Press and hold, 15 seconds. Hold past pairing mode
until earphones turn off again.
Up and Down Buttons
Shure Incorporated
3/7
Volume Up/Down Click + or -
Next track Press and hold +, 3 seconds
Previous track Press and hold -, 3 seconds
Check battery status Press and hold + and - together, 3 seconds
Your phone may not be compatible with some functions. Visit http://www.shure.com/earphones (http://
www.shure.com/earphones) for more information.
Charging the Earphones
Red LED indicates low battery.
1. Connect the earphones to a charging device using the supplied USB cable.
2. The LED is red while charging.
3. When fully charged, the LED turns off.
Warning: Before charging, make sure the product is at room temperature, between 10 to 45°C (50 to 113°F).
Note: Use this product only with an agency approved power supply which meets local regulatory requirements
(e.g., UL, CSA, VDE, CCC, INMETRO).
Specifications
Antenna Information:
•Type = Chip
•Gain = +1.6 dBi
Bluetooth 5:
•Operating frequency = 2402MHz-2480MHz
•Modulation scheme = FHSS
•RF power = +7.45dBm (E.I.R.P.) (for EU)
Supported Codecs:
• aptX™
•aptX HD
Produktspecifikationer
| Varumärke: | Shure |
| Kategori: | bluetooth musik mottaggare |
| Modell: | RMCE-BT2 |
| Bluetooth-version: | 5.0 |
| Bluetooth-profiler: | APT-X |
| Drifttid: | 10 h |
| Antal samtidigt anslutna enheter (max): | 1 |
| Överföringsavstånd: | 10 m |
| Produktens färg: | Svart |
| Antal per förpackning: | 1 styck |
| Trådlös kommunikationsteknologi: | Bluetooth |
| Stand-by tid: | 350 h |
Behöver du hjälp?
Om du behöver hjälp med Shure RMCE-BT2 ställ en fråga nedan och andra användare kommer att svara dig
bluetooth musik mottaggare Shure Manualer
20 Juli 2025
bluetooth musik mottaggare Manualer
Nyaste bluetooth musik mottaggare Manualer
16 Juli 2025