SIIG CE-H21U11-S1 Bruksanvisning
SIIG
Wifi-repeater
CE-H21U11-S1
Läs gratis den bruksanvisning för SIIG CE-H21U11-S1 (12 sidor) i kategorin Wifi-repeater. Guiden har ansetts hjälpsam av 13 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 7 recensioner. Har du en fråga om SIIG CE-H21U11-S1 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/12

1
Introduction
The HDMI Wireless Extender provides an easy way to
extend HDMI signals wirelessly up to 80 meters.
Features and Benefits
• Sends video and audio from your HDMI source to
TV/display wirelessly in 1080p quality
• Transmits content up to 80 meters LOS (Line of
Sight) with no latency
• Supports 2.4GHz frequency with channel hopping
– channel automatically changes when an
interference is detected with other RF sources
• IR extender to control HDMI source device from the
remote HDMI display end
• Complete kit with a Transmitter (TX) and Receiver
(RX)
• HDMI output on Transmitter (TX) for a local TV/
display next to the source device
• Wall mountable
• LED status indicators for Power and Wireless
connection
System Requirements
• PC or A/V devices with an available HDMI output port
• HDMI display
04-0909A
HDMI Wireless Extender
Installation Guide

2
Package Contents
•HDMI Wireless Extender (Transmitter x1, Receiver
x1)
• HDMI cables (2)
• Power adapters (5V/2A for Transmitter, 5V/1A for
Receiver)
• IR blaster cable
• Screws for wall mount (4)
• Installation guide
Application
Figure 1: Application
HDMI Display
HDMI
ODD Player
HDMI Display
IR Blaster
IR Blaster
Receiver
Transmitter
Remote Control

3
• Wireless LED: Red when the connection is
established; flashing when searching for signal or
disconnected
• Power LED: Red when the power adapter is
connected; turns Green when powered on
• Antenna: Sends the signal to the receiver
• Power Button: Turns the transmitter On/ Off
• Power Jack: Plug in the included 5V/2A power
adapter here
• Pairing Button: Press to connect to the receiver
• HDMI In: Connects to your HDMI source device
(DVD player, etc) using the included HDMI cable
• HDMI Out: For local monitor; connects to your
HDMI display using an HDMI cable (cable not
included)
• IR Blaster: Plug in the included IR Blaster cable
here. See IR Blaster Cable on page 4 for more
information
Layout
Transmitter
Power
Button
Power LED
Wireless LED Pairing Button
HDMI In
Antenna
Power Jack
IR Blaster HDMI Out
Figure 2: Transmitter Layout
Produktspecifikationer
Varumärke: | SIIG |
Kategori: | Wifi-repeater |
Modell: | CE-H21U11-S1 |
Behöver du hjälp?
Om du behöver hjälp med SIIG CE-H21U11-S1 ställ en fråga nedan och andra användare kommer att svara dig
Wifi-repeater SIIG Manualer
20 September 2024
Wifi-repeater Manualer
- Steren
- HELGI
- Smart-AVI
- Davis
- ALC
- Eminent
- Sitecom
- ATen
- Linksys
- Huawei
- Seco-Larm
- Moxa
- Gira
- Techly
- Envivo
Nyaste Wifi-repeater Manualer
1 Augusti 2025
29 Juli 2025
29 Juli 2025
28 Juli 2025
23 Juli 2025
23 Juli 2025
23 Juli 2025
22 Juli 2025
10 Juli 2025
9 Juli 2025