SIIG CE-H23X11-S1 Bruksanvisning
Läs gratis den bruksanvisning för SIIG CE-H23X11-S1 (39 sidor) i kategorin Växla. Guiden har ansetts hjälpsam av 13 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 7 recensioner. Har du en fråga om SIIG CE-H23X11-S1 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/39
HDMI 2.0 8x8 Matrix Switcher
All Rights Reserved
User Manual
4K 8x8 HDMI2.0 Matrix Switcher
Preface
Read this user manual carefully before using the product. Pictures shown in this manual
is for reference only. Dierent models and specications are subject to real product.
This manual is only for operation instruction only. The functions described in this version
are updated till December 11, 2016. In the constant effort to improve our product, we
reserve the right to make functions or parameters changes without notice or obligation.
Please refer to the dealers for the latest details.
Trademarks
Any other trademarks mentioned in this manual are acknowledged as the properties of
the trademark owner. No part of this publication may be copied or reproduced without the
prior written consent.
FCC Statement
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to
radio communications. It has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a commercial installation.
Operation of this equipment in a residential area is likely to cause interference, in which
case the user at their own expense will be required to take whatever measures may be
necessary to correct the interference
Any changes or modications not expressly approved by the manufacture would void the
user’s authority to operate the equipment.
4K 8x8 HDMI2.0 Matrix Switcher
SAFETY PRECAUTIONS
To insure the best from the product, please read all instructions carefully before using the
device. Save this manual for further reference.
Unpack the equipment carefully and save the original box and packing material for
possible future shipment
Follow basic safety precautions to reduce the risk of re, electrical shock and injury to
persons.
Do not dismantle the housing or modify the module. It may result in electrical shock or
burn.
Using supplies or parts not meeting the products’ specifications may cause damage,
deterioration or malfunction.
Refer all servicing to qualied service personnel.
To prevent re or shock hazard, do not expose the unit to rain, moisture or install this
product near water.
Do not put any heavy items on the extension cable in case of extrusion.
Do not remove the housing of the device as opening or removing housing may
expose you to dangerous voltage or other hazards.
Install the device in a place with ne ventilation to avoid damage caused by overheat.
Keep the module away from liquids.
Spillage into the housing may result in re, electrical shock, or equipment damage. If
an object or liquid falls or spills on to the housing, unplug the module immediately.
Do not twist or pull by force ends of the optical cable. It can cause malfunction.
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to
the device before cleaning.
Unplug the power cord when left unused for a long period of time.
Information on disposal for scrapped devices: do not burn or mix with general
household waste, please treat them as normal electrical wastes.
Produktspecifikationer
| Varumärke: | SIIG |
| Kategori: | Växla |
| Modell: | CE-H23X11-S1 |
Behöver du hjälp?
Om du behöver hjälp med SIIG CE-H23X11-S1 ställ en fråga nedan och andra användare kommer att svara dig
Växla SIIG Manualer
20 September 2024
20 September 2024
20 September 2024
20 September 2024
Växla Manualer
- WHALE
- EVE
- CyberPower
- Trotec
- BZBGear
- Axing
- Dahua Technology
- Ebara
- ZyXEL
- Liberty
- RGBlink
- Sygonix
- Sylvania
- Brilliant
- Tripp Lite
Nyaste Växla Manualer
9 April 2025
9 April 2025
7 April 2025
5 April 2025
5 April 2025
5 April 2025
5 April 2025
3 April 2025
3 April 2025
2 April 2025