Simpson Megashot MS61048-S Bruksanvisning

Simpson Högtryckstvätt Megashot MS61048-S

Läs gratis den bruksanvisning för Simpson Megashot MS61048-S (108 sidor) i kategorin Högtryckstvätt. Guiden har ansetts hjälpsam av 13 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 7 recensioner. Har du en fråga om Simpson Megashot MS61048-S eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/108

Part Number 7111550 / ENGLISH REV C - 6/2023

SAVE THIS MANUAL FOR FUTURE REFERENCE

USE AND CARE MANUAL

PRESSURE WASHER

READ THIS MANUAL CAREFULLY BEFORE OPERATION

Failure to follow the instructions and safety precautions in this manual can result

in property damage, serious injury and/or death.

NOTE: Photographs and line drawings used in this manual are for reference only and may not

represent your specic model.

If your pressure washer is not working or if there are parts missing or broken, please DO NOT

RETURN IT TO THE PLACE OF PURCHASE. Contact our Customer Service Department by calling

1-877-362-4271 or emailing cservice@fna-group.com

LOOK BEFORE YOU PUMP!

Page II

NOTES

THIS PAGE WAS INTENTIONALLY LEFT BLANK

Page 1

SAVE THIS MANUAL FOR FUTURE USE

Write down the model number, serial number, and purchase date of this product in the spaces

provided below then keep this manual with the purchase receipt(s) for future reference.

Keep this manual for future reference. This manual should be considered a permanent part

of the product and stay with it. This manual should be available to anyone operating the

product(s) it covers. This manual should remain with the product(s) it covers if sold to a new

owner. If the manual becomes damaged, lost, or otherwise unusable, you may download

a new copy from the product pages at www.simpsoncleaning.com or contact customer

support by calling 1-877-362-4271.

Model Number:

Serial Number:

Purchase Date:

Page 2

TABLE OF CONTENTS

Install Button-style Handle 6

ASSEMBLY 6

DISCLAIMERS 5

PERSONAL PROTECTIVE EQUIPMENT

Hazard Alert Symbols 4

Additional Instructions 4

Read this Manual Before Operating 4

4SAFETY INSTRUCTIONS

Organize Accessories

Assemble the Spray Gun

COMPONENT LOCATION 8

CONNECTING HOSES 10

PURGING AIR FROM THE PUMP 11

NOZZLES 12

Nozzle Installation 12

Nozzle Selection 12

USING CHEMICALS 13

OPERATING CHECKLIST 14

High Altitude Operation

Location 14

Checking the Engine Oil

Operating Conditions

Checking Fuel

STARTING THE ENGINE 20

SHUTTING OFF THE ENGINE 21

UNPACKING 6

Page 3

Pressure Washing 22

Preparation 22

Terms 22

22OPERATION TIPS

23TROUBLESHOOTING

25MAINTENANCE

Maintenance

Cleaning the Pressure Washer

Connections

Nozzle Cleaning

Water Inlet Filter

Pump Maintenance

Engine Maintenance 27

27STORAGE AND TRANSPORTATION

Storing for Two Months or Less

Storing for More Than Two Months

Transportation 28

29USING SIMPSON® PUMP GUARD

30WARRANTY

Page 4

CAUTION:

NOTICE

This manual contains important safety information and instructions. Do not operate

this product until you have read, and completely understand all safety, operation, and

maintenance instructions listed in this manual. Failure to follow the information contained

in this manual will result in property damage, injury, and/or death.

NOTE: The warnings and precautions discussed in this manual cannot cover all conditions

and situations that may occur. The operator must understand awareness and caution are

factors which cannot be built into this product and so must be exercised by the operator.

READ THIS MANUAL BEFORE OPERATING

ADDITIONAL INSTRUCTIONS

Be sure to understand the safety symbols and denitions listed below. Each symbol

contains one of four words: DANGER WARNING CAUTION, , , NOTICE, indicating

di󰀨erent levels of hazard severity. These symbols are used throughout this manual and

are followed information about a specic hazard, the consequences of the hazard, and

instructions on how to avoid the hazard. Failure to heed these symbols and follow the

instructions provided with them will result in property damage, injury, and/or death.

HAZARD ALERT SYMBOLS

Indicates an imminently dangerous situation, which if not

avoided, will result in property damage, serious injury, and/

or death.

Indicates a potentially hazardous situation, which if not

avoided, could result in property damage, serious injury, and/

or death.

Indicates a hazardous situation, which if not avoided, could

result in property damage and/or minor to moderate injury.

Indicates information considered important, but not directly

hazard related.

SAFETY INSTRUCTIONS

Along with this manual, be sure to read any additional instructions provided both on and

with the product, attached equipment, accessories, and the engine powering the product.

Pay careful attention to all additional safety rules and instructions on proper startup,

operation, and shutdown procedures. Always use any recommended protective apparel

that may be needed to operate the equipment safely.

DANGER:

WARNING:

Page 6

WARNING!

The threads on the lance and gun coupler can be easily cross threaded resulting

in an improper assembly. An improper assembly of the gun and lance can result in personal

injury. Do not use if the threads on the gun coupler and or lance are cross

threaded.

1. Secure the lance to the gun by

carefully turning the coupler on the spray

gun until the coupler stops rotating. Do

not over tighten. Most of the threads on

the lance will not be visible if the lance

and gun are properly assembled. Be

careful not to cross-thread the gun and

lance.

Assemble the spray gun

UNPACKING

ASSEMBLY

Follow the steps outlined in this section to unpack and assemble your pressure washer.

If you have any questions regarding the unpacking or assembly of your pressure washer,

please have your model number and serial number ready, then contact customer support at

1-877-362-4271 or email cservice@fna-group.com.

1. Place the shipping carton on a solid, at surface.

2. Carefully cut the top of the carton open.

3. Carefully cut each corner of the carton from top to bottom.

4. Lay each side of the carton at on the ground.

5. Remove the contents of the carton.

Install button-style handle

Press and hold buttons then slide

handle onto frame until buttons

click into place.

Attach the spray gun holder to the frame

using the supplied bolt and knob.

Page 8

COMPONENT LOCATION

3 4 5 6 71 2

10 118 9

10. Wheel

9. Fuel valve

8. Spray wand quick connector

7. Spray gun trigger lock

6. Spray gun trigger

5. Spray gun

4. Nozzle holders

3. Spray gun holder

2. Engine starting recoil

1. Engine ON/OFF switch

11. Choke lever

Page 9

1512 13 14

2320 21 22

16 17 18 19

22. Detergent tank (if applicable)

21. Fuel tank

20. High-pressure hose

19. Pump

18. Garden hose coupler & water inlet lter

17. Soap injection barb

16. Thermal relief valve

15. Spark plug

14. Oil ller cap / dipstick

13. Fuel ller cap

12. High-pressure hose hanging strap

23. High-pressure pump outlet

Produktspecifikationer

Varumärke:	Simpson
Kategori:	Högtryckstvätt
Modell:	Megashot MS61048-S
Färg på produkten:	Black, Grey
Vikt:	2160 g
Bredd:	175 mm
Djup:	160 mm
Höjd:	110 mm
Sladdlängd:	10 m
Förpackningens vikt:	- g
Förpackningens bredd:	290 mm
Djuppackning:	230 mm
Förpackningshöjd:	150 mm
Snäll:	Verdringerpomp
Tillgångar:	48 W
Teleskoprör:	Ja
Typ av förpackning:	Doos
Korrekt användning:	Vijver
Lämplig för utomhusbruk:	Ja
Produkter per pall:	128 stuk(s)
Förpackningsvolym:	7000 cm³
Flödeshastighet:	3100 L/u
Max leveranshöjd:	0.8 m
Intrastatkod:	84137021
Minimum antal:	2 stuk(s)
Anslut trådtyp:	G1, G3/4
Sugport:	1"
Leveranshuvud:	2.2 m
Frostbeständig:	Ja
Frystålig upp till och med:	-20 °C
Sprayhöjd:	800 mm
Justeringsområde för teleskoprör:	200 - 480 mm