Sinojo 129S Bruksanvisning

Läs gratis den bruksanvisning för Sinojo 129S (112 sidor) i kategorin Symaskin. Guiden har ansetts hjälpsam av 18 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 4 recensioner. Har du en fråga om Sinojo 129S eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Index

BECS-129S Singular-head Computerized Embroidery Machine I

Index

Part I Features________________________________________________________________________1

Part II Control Panel and Basic Operations________________________________________________6

2.1 Control Panel___________________________________________________________________6

2.2 Main Screen ___________________________________________________________________10

2.3 Definition and Basic Operation of Keys_____________________________________________13

2.4 Indicator Light of Main Shaft Stop Position _________________________________________17

2.5 Start and Stop Button____________________________________________________________17

Part III Basic Knowledge and Operation__________________________________________________18

3.1 Work Status, Embroidery Mode and Work Sequence_________________________________18

3.2 Inputting Design from USB-Disk and Starting First Embroidery________________________21

3.3 Select Memory Design for Embroidery_____________________________________________26

Part IV Setting Parameters_____________________________________________________________29

4.1 Parameter Menu________________________________________________________________29

4.2 Real Time Rotation and Scaling up/down___________________________________________30

4.3 Setting Repetition Embroidery ____________________________________________________34

4.4 Offset Point____________________________________________________________________38

4.5 Cyclic Embroidery______________________________________________________________39

4.6 Work Sequence_________________________________________________________________40

4.7 Standard Data Parameter________________________________________________________42

4.8 Standard Trim Parameters_______________________________________________________45

4.9 Standard Machine Parameters____________________________________________________47

Produktspecifikationer