Skil HD182001 Bruksanvisning
Skil
Borrmaskin
HD182001
Läs gratis den bruksanvisning för Skil HD182001 (50 sidor) i kategorin Borrmaskin. Guiden har ansetts hjälpsam av 13 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 7 recensioner. Har du en fråga om Skil HD182001 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/50

WARNING: To reduce the risk of injury, the user must read and understand the
Owner’s Manual before using this product. Save these instructions for future reference.
AVERTISSEMENT : Afin de réduire les risques de blessure, l’utilisateur doit lire et
comprendre le guide d’utilisation avant d’utiliser cet article. Conservez le présent guide
afin de pouvoir le consulter ultérieurement.
ADVERTENCIA : Para reducir el riesgo de lesiones, el usuario debe leer y comprender
el Manual del operador antes de utilizar este producto. Guarde estas instrucciones para
consultarlas en caso sea necesario.
Owner’s Manual
Guide d’utilisation
Manual del propietario
OR

TABLE OF CONTENTS
General Power Tool Safety Warnings 3-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Safety Warnings for Hammer Drills 4-5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Additional Safety Warnings 5-6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Symbols 7-9 .....................................................
Get to Know Your Hammer Drill . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Specications .................................................10
Operating Instructions 11-13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Maintenance ...................................................14
Extension Cords 14-15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Troubleshooting ...............................................15
Limited Warranty of Skil Consumer Portable,
Benchtop and Hd and Shd Heavy Duty Power Tools . . . . . . . . . . . . . . . . . . 16
WARNING
Some dust created by power sanding, sawing, grinding, drilling and other construction
activities contains chemicals known to the State of California to cause cancer, birth defects
or other reproductive harm. Some examples of these chemicals are:
Lead from lead-based paints.
Crystalline silica from bricks, cement, and other masonry products.
Arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending upon how often you do this type of work.
To reduce your exposure to these chemicals:
Work in a well-ventilated area.
Work with approved safety equipment, such as dust masks that are specially designed to
lter out microscopic particles.
Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling, and
other construction activities. Wear protective clothing and wash exposed areas with soap
and water. Allowing dust to get into your mouth or eyes or to lie on the skin may promote
absorption of harmful chemicals.

GENERAL POWER TOOL SAFETY WARNINGS
WARNING Read all safety warnings, instructions, illustrations and specications
provided with this power tool. Failure to follow all instructions listed
below may result in electric shock, re and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE
REFERENCE.
The term “power tool” in the warnings refers to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
Work area safety
Keep work area clean and well lit. Cluttered or dark areas invite accidents.
Do not operate power tools in explosive atmospheres, such as in the presence of
ammable liquids, gases or dust. Power tools create sparks which may ignite the dust or
fumes.
Keep children and bystanders away while operating a power tool. Distractions can cause
you to lose control.
Electrical safety
Power tool plugs must match the outlet. Never modify the plug in any way. Do not use
any adapter plugs with earthed (grounded) power tools. Unmodied plugs and matching
outlets will reduce risk of electric shock.
Avoid body contact with earthed or grounded surfaces, such as pipes, radiators,
ranges and refrigerators. There is an increased risk of electric shock if your body is earthed
or grounded.
Do not expose power tools to rain or wet conditions. Water entering a power tool will
increase the risk of electric shock.
Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled
cords increase the risk of electric shock.
When operating a power tool outdoors, use an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the risk of electric shock.
If operating a power tool in a damp location is unavoidable, use a ground fault circuit
interrupter (GFCI) protected supply. Use of a GFCI reduces the risk of electric shock.
Personal safety
Stay alert, watch what you are doing and use common sense when operating a power
tool. Do not use a power tool while you are tired or under the inuence of drugs,
alcohol or medication. A moment of inattention while operating power tools may result in
serious personal injury.
Use personal protective equipment. Always wear eye protection. Protective equipment
such as a dust mask, non-skid safety shoes, hard hat or hearing protection used for
appropriate conditions will reduce personal injuries.
Prevent unintentional starting. Ensure the switch is in the off-position before
connecting to power source and/or battery pack, picking up or carrying the tool.
Carrying power tools with your nger on the switch or energising power tools that have the
switch on invites accidents.
Remove any adjusting key or wrench before turning the power tool on. A wrench or a
key left attached to a rotating part of the power tool may result in personal injury.
Produktspecifikationer
Varumärke: | Skil |
Kategori: | Borrmaskin |
Modell: | HD182001 |
Färg på produkten: | Zwart |
Vikt: | 30 g |
Bredd: | 39 mm |
Djup: | 67 mm |
Höjd: | 10 mm |
Användarmanual: | Ja |
LED-indikatorer: | Activiteit |
Medföljande kablar: | SATA, USB |
Ursprungsland: | China |
USB-version: | 3.2 Gen 1 (3.1 Gen 1) |
Material: | Aluminium |
Plug and play: | Ja |
Stöder Windows: | Ja |
USB-anslutning: | Ja |
Stöder Mac-operativsystem: | Ja |
Mac-kompatibilitet: | Ja |
Installerad lagringsenhet: | SSD |
Stöder Linux: | Ja |
Inklusive skruvar: | Ja |
Storlek på lagringsdisk: | - " |
Maximal lagringskapacitet: | 0.512 TB |
Gränssnitt för lagringsenheter som stöds: | Micro Serial ATA, Serial ATA II, Serial ATA III, Serial Attached SCSI |
Chipset: | ASM1153E |
Överföringshastighet: | 6 Gbit/s |
Antal lagringsenheter som stöds: | 1 |
Typ produkt: | SDD-behuizing |
Harmoniserad systemkod (HS): | 84733080 |
Hot-swap: | Ja |
UASP-stöd: | Ja |
Inkluderar skruvmejsel: | Ja |
Behöver du hjälp?
Om du behöver hjälp med Skil HD182001 ställ en fråga nedan och andra användare kommer att svara dig
Borrmaskin Skil Manualer
2 Oktober 2024
25 September 2024
22 September 2024
10 September 2024
9 September 2024
9 September 2024
2 September 2024
1 September 2024
31 Augusti 2024
30 Augusti 2024
Borrmaskin Manualer
- Wurth
- Maktec
- Wolfcraft
- Meec Tools
- Tryton
- Worx
- Craftsman
- AEG
- Max Bahr
- Ribimex
- Powerplus
- Goon
- Dedra
- MyTool
- Ergotools Pattfield
Nyaste Borrmaskin Manualer
13 Juni 2025
13 Juni 2025
13 Juni 2025
12 Juni 2025
7 Juni 2025
7 Juni 2025
3 Juni 2025
2 April 2025
2 April 2025
2 April 2025