Smeg SR60GHU3 Bruksanvisning

Smeg Ugn SR60GHU3

Läs gratis den bruksanvisning för Smeg SR60GHU3 (12 sidor) i kategorin Ugn. Guiden har ansetts hjälpsam av 12 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 6.5 recensioner. Har du en fråga om Smeg SR60GHU3 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/12

Table of Contents

WARNING: For your safety, the information in this manual must be followed to minimize the risk

of fire or explosion, or to prevent property damage, personal injury or death.

Do not store or use gasoline or other flammable vapors and liquids near this or any other

appliance.

WHAT TO DO IF YOU SMELL GAS

• Do not attempt to switch on any appliances.

• Do not touch any electrical switches.

• Do not use any phones in your building.

• Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's instructions.

• lf you cannot reach your gas supplier, call the fire department.

Installation and service must be performed by a qualified installer, service agency or the gas supplier.

INSTRUCTIONS FOR THE INSTALLER: these are intended for the qualified engineer who is able to

install, commission and test the appliance

1. IMPORTANT SAFETY INSTRUCTIONS ................................................................................. 4

2. COOKTOP MEASUREMENTS ............................................................................................... 5

3. POSITIONING THE COOKTOP AND LOCATION REQUIREMENTS .................................... 6

3.1 Gas supply requirements ................................................................................................................................ 8

3.2 Electrical requirements .................................................................................................................................... 9

4. INSTALLING THE COOKTOP ............................................................................................... 11

5. CHECKING OPERATION ...................................................................................................... 13

6. WIRING DIAGRAMS ............................................................................................................. 14