SMK-Link RemotePoint Sapphire VP4585 Bruksanvisning

SMK-Link Trådlös presentatör RemotePoint Sapphire VP4585

Läs gratis den bruksanvisning för SMK-Link RemotePoint Sapphire VP4585 (9 sidor) i kategorin Trådlös presentatör. Guiden har ansetts hjälpsam av 22 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 11.5 recensioner. Har du en fråga om SMK-Link RemotePoint Sapphire VP4585 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/9
VP4585
Page 1
Laser Safety Statement
CAUTION: Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous radiation exposure.
The laser is activated by pressing the laser button identified in the user guide.
Do not stare into the laser beam, or shine the laser at others.
Do not allow minors to use the laser unsupervised.
Do not disassemble the device, it has no serviceable parts.
Do not immerse in any liquid or expose to heat or moisture.
Use only within the designed operating temperature range
of 0-40 degrees C.
Laser Specications:
The laser used in the VP4585 complies as Class 2 laser product with: IEC/
EN 60825-1: 1994+A1+A2, and CFR Title 21 1040.10 and 1040.11, except
for deviations pursuant to Laser Notice No. 50, dated June 24, 2007.
Page 3
Step 1
Install the Batteries
(Supplied)
Open the battery compartment
by pressing down the
cover latch and sliding the
door off the Presenter.
Insert the two supplied AAA
batteries to the battery slots.
Make sure the positive (+) and
negative (-) ends of the batteries
match the polarity markings
inside the battery compartment.
Slide the battery cover
back into position.
Slide the battery cover off
Insert the batteries

Produktspecifikationer

Varumärke: SMK-Link
Kategori: Trådlös presentatör
Modell: RemotePoint Sapphire VP4585

Behöver du hjälp?

Om du behöver hjälp med SMK-Link RemotePoint Sapphire VP4585 ställ en fråga nedan och andra användare kommer att svara dig