Snow Joe ION18SB-HYB-RM Bruksanvisning

Snow Joe Inte kategoriserad ION18SB-HYB-RM

Läs nedan 📖 manual på svenska för Snow Joe ION18SB-HYB-RM (21 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 12 personer och betygsatt med 5.0 stjärnor i genomsnitt av 6.5 användare

Ladda ner PDF

Sida 1/21

THANKS FOR YOUR PURCHASE

OF A REMANUFACTURED PRODUCT.

snowjoe.com

To make sure you get the most out of

your

product, be sure to register online at

to enjoy full product support.

PASTE UPC LABEL HERE

A Division of Snow Joe

®, LLC Model iON18SB-HYB-RM Form No. SJ-iON18SB-HYB-RM-880E-V1

OPERATOR’S MANUAL

CORDLESS + ELECTRIC HYBRID SNOW BLOWER

18-INCH | 40 V MAX* | 13.5-AMP

®, LLC

A Division of Snow Joe

®, LLC Model iON18SB-HYB-RM Form No. SJ-iON18SB-HYB-RM-880E-V1

OPERATOR’S MANUAL

CORDLESS + ELECTRIC HYBRID SNOW BLOWER

18-INCH | 40 V MAX* | 13.5-AMP

IMPORTANT!

Safety Instructions

All Operators Must Read These

Instructions Before Use

Read all instructions when using hybrid snow blowers.

Basic safety precautions should always be followed to reduce

the risk of re, electric shock, and personal injury.

General Safety Rules

Notice the personal safety alert symbol used in this m

manual to draw your attention to a WARNING given along

with the particular operating instruction. This means that

the operation requires special ATTENTION, CAUTION, and

AWARENESS.

• Keep work area clean and well lit – Cluttered, dark areas

invite accidents.

• Keep bystanders away – All bystanders and pets should

be kept a safe distance away from the work area.

• Dress properly – lrDo not wear loose clothing or jewe y.

They can get caught in moving parts. Protective rubber

gloves and non-slip footwear are recommended when

working outdoors.

• Use the right product – Do not use this machine for any

job except that for which it is intended.

• Exercise caution to avoid slipping or falling. mCAUTION! –

Wear protective footwear that will protect your feet and

improve your footing on slippery surfaces.

• Also use safety footwear, snug-tting Use safety glasses –

clothing, protective gloves, hearing and head protection.

• Stay alert – Watch what you are doing. Use common

sense. Do not operate the snow blower when you are tired

or under the inuence of alcohol or drugs.

• Do not overreach – Keep proper footing and balance at

all times.

• Store indoors – When not in use, the snow blower should

be kept dry and stored out of the reach of children in a high

or locked place.

• Maintain snow blower with care – Follow instruction for

maintenance and changing accessories.

mWARNING! Turn o the power switch, remove the

battery, and disconnect the power cable before making any

adjustments, inspecting, servicing, changing accessories,

cleaning the snow blower, or when any other dangerous

conditions present. Any such operation should be performed

after revolving parts inside the snow blower stop completely.

Such preventive safety measures reduce the risk of starting the

power tool accidentally.

mWARNING! When replacing any parts, you must strictly

observe the instructions and procedures described in this user

manual. Special care should be paid to any rubber parts, since

these parts may increase the engine load and decrease its

mechanical power if damaged.

mWARNING! If you notice that the snow blower is not

running properly or hear abnormal sounds from the engine

when it is in use, immediately stop the machine, remove the

battery, disconnect the power cable, and contact the

Snow Joe® + Sun Joe® customer service center at

1-866-SNOWJOE (1-866-766-9563) for assistance.

• Surfaces – This snow blower is intended for use on

paved surfaces. Do not use on gravel, stone or other

unpaved surfaces unless the snow blower is adjusted for

such surfaces according to the instructions given in the

operator’s manual.

• Moving parts present risks – Keep your face, hair,

clothing, hands, and feet away from moving parts. All

guards and safety attachments must be installed properly

before using the unit. Shut o and disconnect the battery

or power cord before touching any parts other than the

handles and switch.

• Avoid unintentional starting – Make sure the safety switch

and the switch bar lever are in the o position before

inserting the battery in the unit or plug in the cord. Do not

carry the snow blower with the safety switch and the switch

bar lever engaged.

• Do not overreach – Maintain proper footing and balance

at all times. Place heels rmly on the ground and tightly

grasp the handle bar. Watch for uneven surfaces and do not

overreach. In case you fall or collide with the snow blower,

inspect the unit for any damages or cracks. When stepping

backwards, be careful to avoid obstacles beneath your feet

or behind you to avoid falling.

mWARNING! If the snow blower strikes any object,

follow these steps:

i) Stop the snow blower, remove the battery and/or

disconnect the power cable;

ii) Inspect for damage;

iii) Repair any damage before restarting and operating

the snow blower.

Safety WARNINGS!

When Using Electric Mode

• Electrical plugs must match the outlet. Never modify

the plug in any way. Do not use any adapter plugs with

grounded appliances. Unmodied plugs and matching

outlets will reduce the risk of electric shock.

• Avoid body contact with earthed or grounded surfaces

(i.e. upper and lower water pipes, radiators, ranges,

refrigerators, microwave ovens, and outer frames of heating

equipment). Take necessary precautions to avoid electric

shock. There is an increased risk of electric shock if your

body is earthed or grounded.

• Do not abuse the cord. Keep the cord away from heat,

oil, sharp edges, or moving parts. Never carry the snow

blower by its cord or yank the cord to disconnect it from the

electrical outlet. Damaged or entangled cords increase the

risk of electric shock.

• Replace or properly repair damaged cords. If the cord

becomes damaged in any manner while plugged into the

wall receptacle, immediately unplug the extension cord plug

from the receptacle.

• Contact with water while operating the snow blower

can result in electric shock and serious bodily injury.

Do not use the snow blower in damp or wet locations or

expose to rain. Do not handle the plug or the appliance with

wet hands or while standing in water.

• mWARNING – Use outdoor extension cords marked

SW-A, SOW-A, STW-A, STOW-A, SJW-A, SJTW-A, or

SJTOWA. These cords are rated for outdoor use and

reduce the risk of electric shock.

• Ifyoundthemainpowercableortheextensioncable

damaged, immediately unplug the cable from the socket

and disconnect the power immediately. Repair the cable

or replace it if necessary.

• Do not move or transport the snow blower when the

plug is connected to the power socket and the switch is

turned on.

Battery + Charger

Safety Instructions

We pay a great deal of attention to the design of every battery

pack to ensure that we supply you with batteries that are safe,

durable and have a high energy density. The battery cells have

a wide range of safety devices. Each individual cell is initially

formatted and its electrical characteristic curves are recorded.

This data is then used exclusively to be able to assemble the

best possible battery packs.

Despite all the safety precautions, caution must always be

exercised when handling batteries. The following points must

be obeyed at all times to ensure safe use. Safe use can only

be guaranteed if undamaged cells are used. Incorrect handling

of the battery pack can cause cell damage.

IMPORTANT! Analyses conrm that incorrect use and poor

care of high-performance batteries are the main factors

responsible for personal and/or product damage.

mWARNING! Use only approved replacement batteries;

other batteries may damage the hybrid snow blower and

cause it to malfunction, which can lead to serious personal

injury.

mCAUTION! To reduce the risk of injury, charge the

EcoSharp® iBAT40 lithium-ion battery pack only in its

designated lithium-ion charger, the iCHRG40. Other types of

chargers present risk of re, personal injury and damage. Do

not wire a battery pack to a power supply plug or car cigarette

lighter. Such misuse will permanently disable or damage the

battery pack.

• Avoid dangerous environments – Do not charge the

battery pack in rain, snow or in damp or wet locations.

Do not use the battery pack or charger in the presence of

explosive atmospheres (gaseous fumes, dust or ammable

materials) because sparks may be generated when inserting

or removing the battery pack, which could lead to a re.

• Charge in a well-ventilated area – Do not block the

charger vents. Keep them clear to allow for proper

ventilation. Do not allow smoking or open ames near a

charging battery pack. Vented gases may explode.

The safe temperature range for the battery is -4°F NOTE:

(-20°C) to 113°F (45°C). Do not charge the battery outside

in freezing weather; charge it at room temperature.

• Maintain charger cord – When unplugging the charger, pull

the plug, not the cord, from the receptacle to reduce the

risk of damage to the electrical plug and cord. Never carry

the charger by its cord or yank it by the cord to disconnect

it from the receptacle. Keep the cord away from heat, oil

and sharp edges. Make sure the cord will not be stepped

on, tripped over or subjected to damage or stress when the

charger is in use. Do not use the charger with a damaged

cord or plug. Replace a damaged charger immediately.

• Do not use an extension cord unless it is absolutely

necessary – Using the wrong, damaged or improperly

wired extension cord poses a risk of re and electric shock.

If an extension cord must be used, plug the charger into a

properly wired 16 gauge or larger extension cord with the

female plug matching the male plug on the charger. Make

sure that the extension cord is in good electrical condition.

4. Keep the battery charger, battery pack(s) and the hybrid

tool out of the reach of children.

5. Do not use the supplied battery charger to charge other

cordless tools.

6. During periods of heavy use, the battery pack will become

warm. Allow the battery pack to cool to room temperature

before inserting it into the charger to recharge.

7. Do not overcharge batteries. Do not exceed the maximum

charging times. These charging times only apply to

discharged batteries. Frequent insertion of a charged or

partially charged battery pack will result in overcharging

and cell damage. Do not leave batteries in the charger for

days on end.

8. Never use or charge batteries if you suspect that it has

been more than 12 months since the last time they were

charged. There is a high probability that the battery pack

has already suered dangerous damage (exhaustive

discharge).

9. Charging batteries at a temperature below 50°F (10°C) will

cause chemical damage to the cells and may cause a re.

10. Do not use batteries that have been exposed to heat

during the charging process, as the battery cells may have

suered dangerous damage.

11. Do not use batteries that have suered curvature or

deformation during the charging process or those that

exhibit other atypical symptoms (gassing, hissing,

cracking, etc.)

12. Never fully discharge the battery pack (maximum

recommended depth of discharge is 80%). A complete

discharge of the battery pack will lead to premature aging

of the battery cells.

Protection from environmental

inuences

1. Wear suitable work clothes. Wear safety goggles.

2. Protect your hybrid tool and the battery charger from

moisture and rain. Moisture and rain can cause dangerous

cell damage.

3. Do not use the hybrid tool or the battery charger near

vapors and ammable liquids.

4. Use the battery charger and hybrid tools only in dry

conditions and at an ambient temperature of 50-104°F

(10-40°C).

5. Do not keep the battery charger in places where the

temperature is liable to reach over 104°F (40°C). In

particular, do not leave the battery charger in a car that is

parked in the sunshine.

6. Protect batteries from overheating. Overloads,

overcharging and exposure to direct sunlight will result

in overheating and cell damage. Never charge or work

with batteries that have been overheated – replace them

immediately, if possible.

7. Store the charger and your hybrid tool only in dry locations

with an ambient temperature of 50-104°F

(10-40°C). Store your lithium-ion battery pack in a cool,

dry place at a temperature of 50-68°F (10-20°C). Protect

the battery pack, charger and hybrid tool from humidity

and direct sunlight. Only place fully charged batteries in

storage (charged to at least 40%).

8. Prevent the lithium-ion battery pack from freezing. Battery

packs that were stored below 32°F (0°C) for more than 60

minutes must be discarded.

9. When handling batteries, be wary of electrostatic charge.

Electrostatic discharges can damage the electronic

protection system and the battery cells. Avoid electrostatic

charging and never touch the battery poles.

Electrical Safety

1. Ground fault circuit interrupter (GFCI) protection should

be provided on the circuit(s) or outlet(s) to be used for

the snow blower. Receptacles are available having

built-in GFCI protection and may be used for this

measure of safety.

2. To prevent electric shock, use only with an extension cord

suitable for outdoor use, such as SW-A, SOW-A, STW-A,

STOW-A, SJW-A, SJOW-A, SJTW-A, or SJTOW-A.

Before use, check that the extension cord is in good

condition. When using an extension cord, make sure to

use one heavy enough to carry the current your product

will draw. For lengths less than 50 ft (15 m), a No.14 AWG

(or greater) extension cord should be used. An undersized

cord will cause a drop in line voltage resulting in loss of

power and overheating.

3. To reduce the risk of electric shock, this appliance has

a polarized plug (i.e. one blade is wider than the other).

Use this appliance only with a polarized UL-, CSA-, or

ETL-rated extension cord for outdoor, all-weather use.

The appliance plug will t into a polarized extension

cord only one way.

If the appliance plug does not t fully into the extension

cord, reverse the plug. If the plug still does not t, obtain

a correct polarized extension cord. A polarized extension

cord will require the use of a polarized wall outlet. The

extension cord plug will t into the polarized wall outlet

only one way. If the plug does not t fully into the wall

outlet, reverse the plug. If the plug still does not t,

contact a qualied electrician to install the proper wall

outlet. Do not modify the appliance plug, extension cord

receptacle, or extension cord plug in any way.

4. To prevent the appliance cord from disconnecting from the

extension cord during operation, use the on-board cord

restraint hook and/or make a knot with the two cords as

shown in Table 1.

5. Do not abuse the cord. Never pull the snow blower by the

cord or yank the cord to disconnect it from the receptacle.

Keep the cord away from heat, oil, and sharp edges.

Additional Safety Instructions

Safety Instructions for Walk-Behind

Snow Blowers

• Read the operator’s manual carefully – Learn your snow

blower’s applications and limitations as well as the specic

potential hazards related to this machine. Do not use this

machine for any purpose other than the one for which it

was designed. Failure to adhere to these precautions may

cause mechanical defaults, serious damage, or personal

injury.

• Preliminary unit inspection – Thoroughly inspect the

unit before use. Make sure all the parts are secure and

installed correctly. If you notice any abnormalities, do not

use the machine until it has been properly repaired. Always

perform a test run the rst time you use the snow blower

or after replacing parts to ensure that the unit is functioning

properly.

• Preliminary area inspection – Clear the area to be plowed

before each use. Remove all objects such as rocks, broken

glass, nails, wire, or string, which can be thrown by or

become entangled in the snow blower. Keep the area of

operation clear of all persons, children, and pets.

• Excessive force – The snow blower was designed to

respond at a certain rate for various snow conditions for

optimal safety and performance. Do not force it; keep the

applied pressure constant throughout its operation.

• Malfunctioning switch – Do not use the snow blower if

the switch does not turn it on and o. Any appliance that

cannot be controlled by the switch is not safe to use and

must be repaired.

• Hitting an object – If the snow blower accidentally strikes

an object, rst stop the snow blower and remove the

battery and/or unplug the power cable. Next, inspect for

damage. Finally, repair or replace any damaged part before

restarting and operating the snow blower.

• Discharge chute safety – Never direct the snow discharge

chute at the operator, at bystanders, at vehicles, or at

windows. The discharged snow, which may contain foreign

objects accidentally picked up by the snow blower can

cause serious damage and personal injury. Do not use your

hands to unclog the discharge chute. Stop the motor before

removing debris.

• Hand-held operating position – Operation of the snow

blower in the hand-held position is unsafe.

• Abnormal operation – If you nd that the snow blower

is not running properly or hear abnormal sounds from the

engine, immediately stop the machine, remove the battery

and/or unplug the power cable, and contact an authorized

Snow Joe® + Sun Joe® dealer or call the Snow Joe® +

Sun Joe® customer service center at 1-866-SNOWJOE

(1-866-766-9563) for assistance.

m WARNING! m

Electric shock may cause SEVERE INJURY or

DEATH. Heed these warnings:

• Do not allow any part of the snow blower to make

contact with water while it is in operation. If the

appliance becomes wet while turned o, wipe dry

before starting.

• Use only a UL-, CSA-, or ETL-rated extension cord

for outdoor, all-weather use, such as the Snow Joe®

+ Sun Joe® Power Joe SJTW-A 14-gauge 50-foot

extension cord with lighted end (Model PJEXT50-B).

Visit snowjoe.com to purchase this extension cord

online or, to order by phone, call 1-866-SNOWJOE

(1-866-766-9563).

• Do not use an extension cord over 100 ft (30 m).

• Do not touch the appliance or its plug with wet hands

or while standing in water. Wearing rubber boots

oers some protection.

EXTENSION CORD CHART

Cord Length:

Min. Wire Gauge (A.W.G.):

50 ft (15 m)

100 ft (30 m)

(B) Connect plug and receptacle

Cord set Appliance cord

(A) Tie cord as shown

Table 1. Method of Securing Extension Cord

• Noise control – When using the snow blower, respect

the local laws and regulations regarding noise control and

environmental protection. To avoid noise disturbance, you

should carefully decide upon an appropriate operation time

and consider the surrounding conditions.

• When work is completed – Disconnect the snow blower

from the power source when not in use, when changing

accessories, and before performing any maintenance task.

• Store safely – Store the snow blower indoors in a dry area

between uses. Keep in a locked area, where children and

unauthorized users cannot gain access. Do not store the

machine while it is still connected to the power source. It

may cause damage and injury.

• Maintain for safety and longevity – Check for

misalignment or binding of moving parts, breakage of

parts, and any other conditions that may aect the unit’s

operation. If damaged, repair or replace the damaged part

before use. Use only those replacement parts made for your

model. When replacing any parts, you must strictly observe

the instructions and procedures described in this manual.

Special care should be paid to any rubber parts, since

these parts may increase the engine load and decrease its

mechanical power if damaged.

Safety Symbols

The following table depicts and describes safety symbols that may appear on this product. Read, understand and follow all

instructions on the machine before attempting to assemble and operate.

The rotating part will continuously

run for several seconds after you

turn o the machine.

READ THE OPERATOR'S

MANUAL(S) – Read, understand

and follow all instructions in the

user manual(s) before attempting

to assemble and operate.

SAFETY ALERT – Indicates a

precaution, a warning or a danger.

Wear hearing protection.

Wear eye protection.

Wear breathing protection.

WARNING! Do not expose the

unit to rain or wet conditions.

Keep dry.

CAUTION! Beware of stones and

other foreign objects that could

be thrown from the appliance.

DANGER! Cutting/dismemberment

hazard – Keep hands away from the

rotating auger. Do not use hands to

unclog rotor housing. Stop motor

before removing debris.

DANGER! Cutting/dismemberment

hazard - Keep feet away from the

rotating auger.

Symbols SymbolsDescriptions Descriptions

Indoor use only. Only use battery

charger indoors.

Do not use hands to unclog chute.

Keep hands, feet and clothing

away from the rotating auger to

avoid injury.

Keep bystanders and children a

safe distance (at least 33 ft/10 m)

away from the work area.

WARNING! Always turn the machine

OFF before conducting inspection,

cleaning and maintenance.

Wear protective gloves and non-slip

footwear when using the machine

and handling debris.

Double insulation

Know Your Hybrid Snow Blower

Read the owner’s manual and safety rules carefully before operating your hybrid snow blower. Compare the illustration

below to the actual unit in order to familiarize yourself with the location of the various controls and adjustments. Save this

manual for future reference.

Technical Data

Rated Voltage 120 V ~ 60 Hz

Electric Power 13.5 A

Battery Voltage* 40 V D.C.

Battery Capacity 4.0 Ah

Charging Time 2.5 – 3 hours (for full charge)

Battery Run Time (Max) 50 mins

No Load Speed 2,200 ± 10% rpm

Rotor Steel auger with 2 rubber blades

Motor 500 W Brushless

Clearing Width 18 in. (46 cm)

Depth of Snow Cut 8 in. (20 cm)

Throw Distance (Max) 20 ft (6 m)

Plowing Capacity (Max) 500 lbs/min (227 kg/min)

Type of Snow Light, uy

Tire Size 8 in. (20 cm)

Directional Control 180º auto-rotate chute

LED Light 3 watt

Weight (snow blower alone) 39.5 lbs (17.9 kg)

Weight

(snow blower with battery installed)

42.1 lbs (19.1 kg)

*Initial no-load voltage, when fully charged, peaks at 40 volts; nominal voltage under typical load is 36 volts.

1. Handle bar

2. ON/OFF switch bar lever

3. LED light switch

4. LED light

5. Chute remote switch

6. Extension cord restraint hook

7. AC mode safety switch button

8. DC mode safety switch button

9. Upper handle

10. Handle locks

11. Appliance cord

12. Battery compartment

13. Chute deector

14. Auxiliary handle

15. Middle handle assembly

16. Handle knobs and square J-bolts (2)

17. Deector knobs, washers, and carriage bolts (2)

18. Lower handle

19. Wheels

20. Main cover

21. Auger

22. Scraper bar

23. Push button for battery indicator

24. Battery indicator

25. Push lock button

26. EcoSharp® lithium-ion battery (iBAT40)

27. EcoSharp® battery charger (iCHRG40)

23 24

Unpacking

Carton Contents:

• Hybrid snow blower with handle

• EcoSharp® 40 V 4.0 Ah battery

• EcoSharp® 40 V battery charger

• Handle knobs/Deector knobs (4)

• Square J-bolts (2)

• Carriage bolts (2)

• Rubber washers (2)

• Manual with registration card

1. Carefully remove the hybrid snow blower and check to

see that all of the above items are supplied.

2. Inspect the product carefully to make sure no breakage or

damage occurred during shipping. If you nd damaged or

missing parts, DO NOT return the unit to the store. Please

call the Snow Joe® + Sun Joe® customer service center at

1-866-SNOWJOE (1-866-766-9563).

Do not discard the shipping carton and packaging NOTE:

material until you are ready to use the hybrid snow blower.

The packaging is made of recyclable materials. Properly

dispose of these materials in accordance with local

regulations or save the packaging for long-term product

storage.

IMPORTANT! The equipment and packaging material are

not toys. Do not let children play with plastic bags, foils

or small parts. These items can be swallowed and pose a

suocation risk!

Assembly

Assembling the handles

1. For easy assembly, the snow blower comes equipped with

most of the parts already connected. In just a few simple

steps, your snow blower will be ready to go. To engage

the handle, pull up on the upper frame (Fig. 1).

2. Secure the connection of the middle handle assembly to

the upper handle by fastening the handle locks on each

side (Fig. 2).

3. Secure the connection of the middle handle assembly

to the lower handle using 2 handle knobs and 2 square

J-bolts and tighten on each side (Figs. 3 & 4).

Fig. 1

Fig. 2

Fig. 3

Fig. 4

Handle knob

Square

J-bolts

Charging the Battery

1. Pull the push lock button on the battery to pull the battery

pack up and out of the equipment (Fig. 7).

2. Check that the mains voltage is the same as that marked

on the rating plate of the battery charger. Then, insert the

charger's plug into the electrical wall outlet. When you

plug in the charger, the top green light will illuminate and

stay green (Fig. 8).

3. Place the battery pack into the charger by sliding the pack

as shown to lock it into position. When you insert the

battery into the charger, the bottom red light will illuminate

to indicate that the battery is charging (Fig. 9).

4. When the bottom light turns green, the battery is fully

charged (Fig. 9).

NOTE: If the top light remains green while the bottom light

alternately ashes red and green, this indicates a temperature

abnormality (i.e. that the battery pack is either too hot or too

cold). If there is only a red blinking light, this indicates that

something is wrong with the battery. Contact Snow Joe® +

Sun Joe® customer service center at 1-866-SNOW-JOE

(1-866-766-9563) for assistance.

5. A fully discharged pack with an internal temperature in the

normal range will fully charge in 2.5 to 3 hours (between

32ºF/0ºC and 113ºF/45ºC). Heavily cycled battery packs

may take longer to charge completely.

6. If the charging light indicator alternately blinks red and

green or the light indicator does not come on at all, check

that the battery pack is fully seated into the bay. Remove

the pack and reinsert. If the problem persists, contact the

Snow Joe® + Sun Joe® customer service center at

1-866-SNOWJOE (1-866-766-9563) for assistance.

Fig. 7

Push lock

button

Fig. 8

green

Power on

Fig. 9

green

Fully charged

green

red

Charging

Green

Flashing red/green

Temperature abnormal

Flashing red only

Something is wrong

Produktspecifikationer

Varumärke:	Snow Joe
Kategori:	Inte kategoriserad
Modell:	ION18SB-HYB-RM
Bredd:	244 mm
Djup:	225 mm
Typ av strömkälla:	ATX
Antal USB 2.0-portar:	4
VGA (D-Sub) port(ar):	1
Antal HDMI-portar:	1
Mikrofon, linjeingång:	Ja
Antal Ethernet LAN (RJ-45)-portar:	1
Hörlursutgångar:	3
DVI-D-portar:	1
Processoruttag:	LGA 1155 (Socket H2)
PCI Express-kortplatsversion:	2.0
Processorfabrikant:	Intel
Maximalt internminne:	16 GB
Inbyggd grafikadapter:	Nee
Kompatibla operativsystem:	Windows 7/Vista/XP\n
Ljudutgångskanaler:	7.1 kanalen
Nätverksfunktioner:	Gigabit Ethernet
Snabbinstallationsguide:	Ja
ETC:	Nee
Ethernet-gränssnittstyp:	Gigabit Ethernet
Chipset moderkort:	Intel® H61
Ljudchip:	Realtek ALC889
PCI Express x1-platser:	1
PCI Express x16-platser:	1
Minneskanal:	Dubbelkanaals
Gränssnitt för lagringsenheter som stöds:	SATA II
PS/2-port(ar):	2
Komponent för:	PC
Minnesspänning:	1.5 V
LAN-kontroller:	Atheros AR8151
Icke-ECC:	Ja
PCI-platser:	2
Kompatibla processorer:	Intel Celeron G, Intel Pentium
Minnestyper som stöds:	DDR3-SDRAM
Moderkort chipset familj:	Intel
Moderkorts formfaktor:	micro ATX
Antal minnesplatser:	4
Minnesklockhastigheter som stöds:	800,1066,1333 MHz
BIOS-typ:	AWARD
Stöd för parallell bearbetning:	Niet ondersteund
Anslutning för CPU-kylare:	Ja
Anslutningar för husfläktar:	1
ATX-strömkontakt (24-stift):	Ja
USB 2.0-anslutningar:	2
Anslutning för ljudpanel på framsidan:	Ja
Antal SATA II-kontakter:	4
Perifera (Molex) strömkontakter (4-stift):	1
Typ av styrenhetsanslutning:	iTE IT8728
Minnesmodulkapacitet som stöds:	4GB
Parallellkontakt:	Ja