Sonuus Loopa Bruksanvisning
Läs gratis den bruksanvisning för Sonuus Loopa (2 sidor) i kategorin mikrofon. Guiden har ansetts hjälpsam av 37 personer och har ett genomsnittsbetyg på 3.5 stjärnor baserat på 19 recensioner. Har du en fråga om Sonuus Loopa eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/2
Loopa
®
Microphone
Owner’s Manual
Loopa
®
Loopa
®
Loopa
®
Loopa
®
Congratulations on your purchase of the
Loopa®. Please take the time to read through
this manual to ensure you get the best from
your Loopa®.
Introduction
What is the Loopa
®
?
The Loopa® is the world’s first looper
microphone. It can be used just like a regular
microphone but also has the ability to record
what you are singing, play that back in a loop
and let you sing on top of it. This way you can
build up layers of sound to create unique and
interesting performances.
Your new Loopa® features a unique high-
integrity looper engine custom-designed by
sonuus. Built using the latest FLASH memory
technology for the most robust recording and
using 32-bit floating-point processing to
maximise the sonic quality of your recorded
loops.
Sound quality is further guaranteed by the
special “clip-free” architecture of the looper
engine: no matter how many times you
overdub your loop it will never clip and cause
unpleasant distortion.
A high-quality condenser microphone capsule
is combined with an acoustically-optimised
windscreen to ensure outstanding vocal
clarity and a powerful low-frequency
response.
The body of the Loopa® has been carefully
sculpted to ensure it balances correctly in your
hand, is easy to hold, and easy to operate the
controls. And it looks cool too!
Connections
XLR
On the end of the Loopa
® is a standard 3-pin
XLR microphone connector. Connect the
supplied microphone cable (or use any other
standard microphone cable) and connect the
other end of the cable to your speaker or other
audio equipment.
Some equipment designed to be used with
microphones can supply phantom power
(+48V) to the microphone. If your equipment
can supply phantom power make sure this is
turned off before connecting the Loopa®.
Power
Battery (AA)
The Loopa® is powered by a single AA battery
(alkaline or rechargeable). Simply open the
battery door and put in a battery observing
the correct polarity. If you connect it the wrong
way round it won’t cause any damage, but the
unit won’t operate until the battery is inserted
correctly.
When you insert the battery make sure you
put the ribbon under the battery to make it
easy to remove later.
Use the power switch on the control panel to
turn on the Loopa®. The will light.POWER LED
To prolong the life of the battery, remember to
turn off the power switch when you have
finished using the Loopa®.
Because of its low power consumption, the
unit will run for many hours (typically for more
than 10) on a single battery. When the battery
is close to needing to be replaced, the POWER
LED will flash. It is not necessary to replace the
battery immediately since the Loopa
® will
continue to function normally (typically for 1
hour). If you need the Loopa® to work reliably
for several hours (
e.g.,
a recording session, or
when playing live) the battery should be
replaced if the is flashing.POWER LED
Record your first loop
Using your Loopa® couldn’t be simpler.
After you have connected the Loopa® to a
speaker and turned it on, you can start using it
like any other regular microphone.
To record your first loop, quickly press and
release the RECORD button (don’t keep the
button pressed). As soon as you do this
everything you sing will be recorded. To show
that you are recording, the light ring will
illuminate in red.
To stop recording your loop and play it back,
quickly press the RECORD button again
(remember not to keep the button pressed).
The light ring will now change from red to
green to show the loop is being played.
The level (or volume) of the loop can be
adjusted using the thumbwheel control.
Moving this fully to the right (number 10 is
positioned at the top of the thumbwheel) will
give maximum playback level (the same
volume as it was recorded). Use this level
control to balance the level of the loop and
your live singing. Typically, this is set so the
loop level is slightly lower than the live level
(position 8 or 9).
RECORD
PLAY/STOP
LOOP LEVEL
POWER
LIGHT RING
Overdubbing
Recording a loop and singing over it is exciting,
but when you record another loop (or layer)
onto the first loop the fun really begins.
Recording onto an existing recording like this
is called overdubbing.
Overdubbing on the Loopa® works just like
recording: quickly press RECORD to start
overdubbing (the light ring will illuminate red
and the loop will continue to play at the same
time). To stop overdubbing press RECORD
again and the loop will continue playing; the
light ring will illuminate green.
You can start and stop overdubbing as often
as you like. For example, you can enable it
briefly to add a short accent sound, or you can
keep it active during your whole performance
to build up many layers.
Playing and stopping loops
The loop playback can be stopped at any time
by quickly pressing the PLAY/STOP button.
Similarly, quickly pressing PLAY/STOP will start
playback again. Each time you start playback,
the loop will play from the beginning.
Note that you can also start loop playback and
overdub at the same time by pressing RECORD
when the looper is stopped.
Erase loop (start again)
When you want to start a new performance
(or if you have made a mistake and want to
start again) it is easy to erase the existing loop.
Press and hold both RECORD PLAY and /STOP
buttons until the light ring blinks both red and
green to indicate the loop has been erased.
Produktspecifikationer
| Varumärke: | Sonuus |
| Kategori: | mikrofon |
| Modell: | Loopa |
Behöver du hjälp?
Om du behöver hjälp med Sonuus Loopa ställ en fråga nedan och andra användare kommer att svara dig
mikrofon Sonuus Manualer
14 September 2024
mikrofon Manualer
- American DJ
- The T.bone
- Schoeps
- Voice Technologies
- Vonyx
- Xvive
- Tannoy
- Røde
- Hohner
- Galaxy Audio
- STRICH
- Blue Microphones
- United
- Roland
- ViolaWave
Nyaste mikrofon Manualer
19 Oktober 2025
19 Oktober 2025
18 Oktober 2025
18 Oktober 2025
18 Oktober 2025
18 Oktober 2025
18 Oktober 2025
16 Oktober 2025
15 Oktober 2025
13 Oktober 2025