Sony RM-VZ320 Bruksanvisning

Sony Fjärrkontroll RM-VZ320

Läs gratis den bruksanvisning för Sony RM-VZ320 (5 sidor) i kategorin Fjärrkontroll. Guiden har ansetts hjälpsam av 18 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 9.5 recensioner. Har du en fråga om Sony RM-VZ320 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/5

4-170-641- (1)31

Remote Commander

RM-VZ320

Operating Instructions

Manual de instrucciones (parte posterior)

English

For the Customers in the U.S.A.

WARNING

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following

measures:



Reorient or relocate the receiving antenna.



Increase the separation between the equipment and receiver.



Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.



Consult the dealer or an experienced radio/TV technician for help.

You are cautioned that any changes or modifications not expressly approved in this

manual could void your authority to operate this equipment.

Setting Up the RM-VZ320

The RM-VZ320 is preset at the factory to operate Sony brand A/V devices

set to any of the Device Select buttons (see the table below).

To use with non-Sony A/V devices, or Sony devices that are not preset at the

factory, set the manufacturer’s code for each device.

Devices Button Factory setting*

TV TV Sony TV (00810)

TV, IPTV, Cable set top box,

Satellite receiver, Digital-to-analog

converter, DVD player, DVD

recorder, Blu-ray Disc/HD-DVD

player, DVR (digital video

recorder), PVR (personal video

recorder), VCR, Video accessory,

CD player, Cassette deck, DVD

Home Theater, Amplifier, Receiver

CBL (SAT) Cable set top box (non-

Sony) (51376)

DVD (BD) Sony DVD player

(11033)

DVR (PVR) Sony digital video

recorder (22676)

VCR Sony VCR (60032)

CD Sony CD player (70000)

AMP Sony receiver (82586)

* The five-digit code is the preset manufacturer’s code.

Note

Only a TV can be assigned to the Device Select button. You can assign any device to TV

the other Device Select buttons.

Installing the batteries

Slide open the battery compartment and insert two size AA (R6) dry

batteries (not supplied).

Insert the batteries (negative end first) into the battery compartment as

shown below.

1 2

Battery life

Under normal conditions, size AA (LR6) alkaline batteries will last up to one

year. If the RM-VZ320 does not operate properly, the batteries might be

drained. Replace both batteries with new ones.

Notes



Replace the batteries within 2 minutes after removing them, and do not press any

button when replacing the batteries. Otherwise, your code settings may be cleared.



Do not use an old battery with a new one, or mix different types of batteries together.



If the electrolyte inside the battery should leak, wipe the contaminated area of the

battery compartment with a cloth and replace the old batteries with new ones. To

prevent electrolyte from leaking, remove the batteries when you plan not to use the

RM-VZ320 for a long period of time.

Specifications

Operating distance Approx. 11 m (36 ft) (varies depending on devices of

different manufacturers)

Power requirements Two size AA (R6) dry batteries (not supplied)

Battery life Approx. 1 year when using size AA (LR6) alkaline batteries

(varies depending on frequency of button use - up to approx.

300 times per day.)

Dimensions Approx. 52 × 236 × 26 mm (2 1/8 × 9 3/8 × 1 1/16 in.)

(w/h/d)

Mass Approx. 120 g (4.2 oz) (not including batteries)

Design and specifications are subject to change without notice.

Troubleshooting

If you have problems setting up or using the RM-VZ320:



Carefully perform the setup procedure of “Startup Guide.” If the RM-VZ320 does not

work, try repeating the setup procedure using another manufacturer’s code (if listed

for your device). If you still cannot operate the RM-VZ320, try the Search function

(see “Searching for the correct code”).



Aim the RM-VZ320 directly at the device.



Remove any obstacles in the path between the RM-VZ320 and the device.



Make sure you have pressed the correct Device Select button.



Check that the device has infrared remote capability. For example, if your device did

not come with a remote control, it probably is not capable of being controlled by the

RM-VZ320.



The batteries are weak, or not inserted correctly. Replace them with new ones or insert

them correctly.

For the customers in the U.S.A.

Customer Support Information

After you have read through this manual, if you still cannot get the RM-VZ320 to work

properly, call the Sony Customer Support Helpline at

1-800-822-2217.

Startup Guide This guide shows you how to set up and use the RM-VZ320 to operate your devices.

If your Sony device has already been preset, see “Operate the device.”

Set the manufacturer’s code

Example: To set up a Philips TV

1 Find the manufacturer’s code in the supplied “Manufacturer’s Code List.”

4-170-685- (1)12

RM-VZ320

Engli sh

The following tables show brand names ( ) and their corresponding Bra nd

code numbers ( ).Co de No.

To set the manu facturer’s code, refer to the Operating Instructions.

Fra nça is

Le tableau ci-dessous indique des marques ( ) et les codes Bra nd

correspondants ( ).Co de No.

Pour régler le code de fabricant, reportez-vous au mode d’emploi.

Esp añ ol

La siguiente tabla muestra los nombres de las marcas ( ) y el núm ero Bra nd

de código correspondiente ( ).Co d e No.

Para establecer el código del fabricante, consulte el Manual de instru cciones.

Manufact urer’s Code List

Liste des codes d’appareil par fabricant

Lista de códigos del fabricante

T V / T élé vis eu r / T V

Brand Code No .

Acer 01339

Acti on 0065 0

Admi ral 00 093, 004 63

Advent 00761, 00783, 00842

Akai 00672, 00702, 00812, 01675,

02232

Akira 00753, 01733

Alf i de 0 067 2

Ana m 002 50

Ana m N ati on al 0025 0, 00 650

Anh u a 000 51

AOC 00093, 00178, 00451, 01365,

01589, 02014, 02087

Apex Dig it al 0015 6, 0 0748 , 007 65, 0076 7,

00879, 02397

Asta r 0173 8

Audiovox 00451, 00802, 00846, 00875

Aventu ra 00 171

Bai l e 006 61

Beiji ng 0066 1, 00 812

Bell & Howel l 0015 4

BenQ 01032, 01315

BGH 00876, 00898

Blu e Sky 01 254, 021 53

BPL 01472, 01476, 01477, 01543

Brokson i c 0046 3

Cai l i n g 0074 8

Carver 000 54

Celebrit y 00000

Celera 007 65

Cha ng chen g 0005 1, 0 0661

Cha n g fen g 0 07 53

Changh ong 00156, 00765, 00767, 00783,

01156

Chun Yun 00000, 01687, 01756

Chu n g Hsi n 0 0053

Cin em a 0067 2

Cin era l 004 51

Cit izen 016 71, 0 1672

Brand Code No .

Coby 01634, 02306, 02315, 02344,

02345, 02348

Comm ercia l

Solu t i on s

00047, 01447

Conrowa 00145, 00156, 00753, 01156

Cont i n en t a l 02357

Crosl ey 0000 0, 0 0054

Crown 006 72

Crown Mus ta ng 00672

Curt i s 0235 2

Curt i s Ma th es 00047, 0005 4, 00 093, 001 45,

00154, 00166, 00451, 00702,

01147, 01347, 01661

Daewoo 00154, 00178, 00451, 00661,

00672, 01661

Dayu 0066 1

Dell 01080, 01178, 01264, 01863

Denon 0014 5

Digi so n i c 01826

Digi ta l Lif estyl es 0176 5

DirecTV 01501

Dum on t 0001 7

Durabrand 00171, 00178, 00463, 01034

Dynex 01463, 01780, 01785, 01810,

02049, 02184

El ect roban d 00 00 0

El ectr ogra ph 01755

El ectroh om e 0046 3, 0 1670 , 016 72

El ektra 000 17, 0166 1

El emen t 01687 , 021 83

Emerson 00017, 00154, 00171, 00178,

00451, 00463, 01394, 01661,

01864

Em prex 0 1422 , 017 65

En cross 0087 6

Envision 00813, 01365, 01589, 02014,

02087

ESA 00171, 00812

Fish er 0 01 54

Fortr ess 0009 3

Frig i da i re 0182 6

Brand Code No .

Fuji m aro 01498 , 016 87

Fuji m a ru 01 68 7

Fujitsu 00683, 00809, 00853

Funai 00000, 00171, 01271

Fur i 0014 5

Ga teway 01755, 0175 6

GE 00047, 00051, 00178, 00451,

01347, 01447, 01454, 02359

GFM 00 171

Gi bral t er 00017

Gi bson 0182 6

Go Vi deo 00886

Gol dStar 001 54, 0 0178

Gra di en t e 00053

Gru ndi g 00672 , 00 683

Haier 01034, 01748, 01749, 01753,

02309, 02449

Hal l m a rk 00178

Han ko ok 0017 8

Han n s. G 0178 3

Hannspree 01348, 01745, 01783, 01826

Harm a n /Kar don 0005 4

Haverm y 0009 3

Heli o s 0 086 5

Hell o Ki tt y 00 451

Heran 0 1826

Heroson i c 01 826

Hewlet t Pa ckard 01494, 0150 2, 0 1642

Hisense 00145, 00156, 00748, 00753,

01156, 01314, 02098, 02183,

02355, 02419

Hitachi 00145, 00156, 00178, 01145,

01156, 01256, 01643, 02215,

02431, 02433

Hon gm ei 000 93

HP 01494, 01502, 01642

Hu af a 001 45

Hu ari 00 14 5

Hu ma x 0150 1

Hu odat eji 0 00 51

iLo 0 16 84

Im peria l C rown 00661

In fi n i t y 00 054

Insign ia 00171, 01204, 01423, 01517,

01564, 01710, 01780, 01892,

02002, 02049, 02088, 02417

In teq 00 01 7

IRT 00451, 01661

JBL 000 54

JCB 00 000

Jean 00051, 00156

Jens en 0076 1

Ji ah u a 000 51

Ji n f eng 000 51

Jinxi ng 00054, 00145, 00156

JVC 00053, 00463, 00650, 00731,

01253, 01601, 01774, 02271

Kan gl i 006 61

KDS 01498, 01687

Ken Brown 0132 1

Kiot o 000 54

KLH 00765, 00767

Kolin 00053, 00150, 01240, 01331,

01610, 01755

Konk a 0074 8

Brand Code No .

Kreisen 00 876

Kun l un 000 51, 0 0661

LG 00017, 00178, 00856, 01178,

01265, 01423, 01768, 02358,

02424

LXI 00047, 00054, 00154, 00156,

00178

M&S 000 54

MAG 01498, 01687

Magnavox 00051, 00054, 00802, 01198,

01254, 01365, 01454, 01856,

01866, 02372

Marantz 00054, 00704, 01454

Mas tro 00 053

Mat su shi ta 00250, 0065 0

Max en t 01755

Mega tron 0 0145 , 001 78

Memorex 00150, 00154, 00178, 00463,

01670, 01892

MGA 00150, 00178

Midlan d 00017, 00047, 00051

Mitsubishi 00093, 00150, 00154, 00178,

00250, 00836, 01250

Moto rol a 000 93

Mu dan 00 051

NAD 00156, 00178, 00866, 01156

Nat i on a l 00 05 1

NEC 00051, 00053, 00154, 00156,

00178, 00704, 01704, 01797

NetT V 0175 5

Newave 00 093, 0017 8

NewSoni c 0182 6

Nexu s E lectr oni cs 0218 3

Ni kko 0017 8

Ni m bro 0 21 04

Noblex 0015 4

Norcent 00748, 00824, 01365, 01589,

02110

Nu Visi on 01 657, 0215 8

Olevia 01144, 01240, 01331, 01610

Onida 00053, 01253, 02396

Optimus 00154, 00166, 00250, 00650

Optom a 0134 8

Opton i ca 0009 3

Orion 00463, 01463

Panasonic 00051, 00054, 00250, 00650,

01271, 01457, 01480

Pan da 0005 1

PARK 0210 4

Penney 00047, 00051, 00156, 00178,

01347

Petters 0 1523

Philco 00054, 00145, 00171, 00178,

00463, 01029, 01271, 01394,

01661

Phili ps 00000, 00051, 00054, 00178,

00605, 00639, 00690, 01454,

01744, 01806, 01856, 01866,

01867, 02372, 02374

Pioneer 00166, 00679, 00866, 01260,

01457

Polaroid 00765, 00865, 01276, 01314,

01498, 01523, 01687, 01766,

02002, 02120, 02121, 02425

Polyvis ion 00889, 011 44

Portl an d 00451, 0166 1

Prima 00761, 00783, 01785

TV / Téléviseur / TV

Brand Code No.

Acer 01339

Action 00650

Admiral 00093, 00463

Advent 00761, 00783, 00842

Brand Code No.

Coby 01634, 02306, 02315, 02344,

02345, 02348

Commercial

Solutions

00047, 01447

Jean 00051, 00156

Jensen 00761

Jiahua 00051

Jinfeng 00051

Jinxing 00054, 00145, 00156

JVC 00053, 00463, 00650, 00731,

01253, 01601, 01774, 02271

Kangli 00661

KDS 01498, 01687

Ken Brown 01321

Kioto 00054

KLH 00765, 00767

01347

Petters 01523

Philco 00054, 00145, 00171, 00178,

00463, 01029, 01271, 01394,

01661

Philips 00000, 00051, 00054, 00178,

00605, 00639, 00690, 01454,

01744, 01806, 01856, 01866,

01867, 02372, 02374

Pioneer 00166, 00679, 00866, 01260,

01457

Polaroid 00765, 00865, 01276, 01314,

01498, 01523, 01687, 01766,

02002, 02120, 02121, 02425

If your device is not listed, try the Search function (see “Searching for the correct code”).

2 Press and hold for more than 3 seconds.SET

The indicator lights up.SET

While keeping held down, press SET

the desired , Device Select button

then release both buttons.

3 Enter the manufacturer’s code (01454).

The indicator flashes three times and SET

turns off.



Operate the device

1 Aim the RM-VZ320 directly at the device.

2 Press the Device Select button for the

device you want to operate.

3 Press POWER to turn on the device.

4 Press buttons on the RM-VZ320 to check that they function.

See “Remote Button Descriptions” for the functions of buttons for each device.

If the RM-VZ320 does not seem to be working…

Check that you have set the correct manufacturer’s code.

Try repeating the setup procedure using another manufacturer’s code (if listed for your device).

If you still cannot operate the RM-VZ320 after trying all the listed codes, try the Search function (see “Searching

for the correct code”).

Searching for the correct code

You can set the manufacturer’s code using the Search function.

1 Power on the device with its power switch.

2 Aim the RM-VZ320 at the device you want to set.

3 Press and hold for more than 3 seconds. SET

The indicator lights up. SET

While keeping held down, press the desired Device Select button, SET

then release both buttons.

4 Enter using the number buttons. 9 - 2 - 2

The indicator flashes three times.SET

5 Press and hold to start searching. 

When the device turns off, release the button.

If you overshoot the required code, you can search for the next or previous

code using the  or  button.

6 Press .

The indicator flashes three times and turns off.SET

7 Check if the code number works correctly (see “Remote Button

Descriptions”).

If you still cannot operate the device, repeat steps to search for another

code that works for most functions of your device.

Checking the manufacturer’s code you have set

1 Press and hold for more than 3 seconds. SET

The indicator lights up. SET

While keeping held down, press the desired Device Select button, SET

then release both buttons.

2 Enter using the number buttons. 9 - 3 - 3

The indicator flashes three times.SET

3 Press .

4 When the indicator starts flashing, count the number of flashes. SET

Short flash(es) indicate which digit (first, second, etc.), followed by long

flash(es) to indicate the digit number (i.e., 2 long flashes represent the

number 2). “0” is indicated by rapid flashing.

Determine the 5-digit code number this way. To recheck, press .

5 Press to finish.SET

Clearing the automatic power-on control (Sony

devices only)

The Device Select buttons are preset to automatically turn on the device

when pressed.

To cancel the function:

1 Press and hold for more than 3 seconds. SET

The indicator lights up. SET

While keeping held down, press , then release both buttons.SET

2 Enter using the number buttons. 9 - 7 - 7

The indicator flashes three times.SET

3 Press the desired Device Select button.

The indicator flashes three times and turns off.SET

To set the function again, perform the same procedure above.

Adjusting the volume

Press VOL +/– to control the volume. Press to mute the sound. MUTING

When a TV or other video device is selected, the TV’s volume is controlled.

When an audio device is selected, the amplifier’s volume is controlled. When

a DVD Home Theater is selected, its volume can be independently

controlled.

To change the factory preset of the volume control

Example: When you want to hear the sound of your DVD player (set to the

DVD button) via the connected amplifier (set to the button)AMP

1 Press and hold for more than 3 seconds. SET

The indicator lights up. SET

When keeping held down, press , then release both buttons.SET DVD

2 Enter - - using the number buttons. 955

The indicator flashes three times.SET

3 Press . AMP

The indicator flashes three times and turns off.SET

To reset the setting, press again in Step 3.DVD

Assigning a channel to each number button

Channel selecting procedures can be programmed to the number buttons

( – ) for each device mode, which allows you to select any channel 0 9

number directly with a single press of a number button.

Example: To assign a channel to number button in mode9 CBL

1 Press and hold for more than 3 seconds. SET

The indicator lights up. SET

When keeping held down, press , then release both buttons.SET CBL

2 Enter - - using the number buttons. 971

The indicator flashes three times.SET

3 Press number button . 9

The indicator flashes three times.SET

4 Enter the channel number using the number buttons,  (dot), or .ENTER

5 Press to complete the programming. SET

The indicator flashes three times and turns off.SET

To cancel the process, press and hold for more than 3 seconds. SET

To clear the program, press and hold the programmed number button for

more than 3 seconds in Step 3. The indicator flashes three times and SET

turns off.

Notes



If you press four buttons in Step 4, the setting mode ends and the channel will be

programmed.



If another channel has already been set on a button, it will be overwritten with the

new one.



Once a number button has been programmed, it cannot function as regular number

button.

Restoring the factory settings

You can clear all the settings and reset the RM-VZ320 to its factory settings.

1 Press and hold for more than 3 seconds. SET

The indicator lights up. SET

While keeping held down, press , then release both buttons.SET

2 Enter using the number buttons. 9 - 0 - 0

The indicator flashes three times. SET

To cancel, press any button except .

3 Press .

The indicator flashes three times and turns off.SET

Notes on using the RM-VZ320



The RM-VZ320 will not perform functions that the device is not designed for. For

example, if your TV does not have the muting function, on the RM-VZ320 MUTING

will not function with your TV.



The function of the buttons varies depending on settings/operating modes. The table

of “Remote Button Descriptions” shows how the RM-VZ320 generally operates for

each device in the preset mode.



If your cable set top box can control volume, be sure to set its volume to a moderate

level. If the volume on the cable set top box is turned down completely, you will not be

able to adjust your TV’s volume with the RM-VZ320.

Notes



If the setting is incomplete,

the indicator flashes once SET

and the indicators turn off.

Start again from the

beginning.



If no operations are

performed for 10 seconds

while setting, the setting will

be canceled, and must be

restarted.



To cancel the process, press

SET SET any time. The

indicator turns off.

SET

POWER

Device

Select

buttons

Number

buttons

Remote Button Descriptions

General



SET: Press to set up the RM-VZ320. The indicator lights or flashes while

setting.



Device Select buttons: Press to select the device to operate.



//// : Moves the cursor to select a menu item/enters the selected item.



VOL +/–: Turns the volume up/down.



TV: Turns the TV on and off (does not work for a CD player or cassette deck).



POWER: Turns the selected device on and off.



MUTING: Mutes the volume. Press again to turn muting off.



SLEEP: Enables the Sleep function (when available).

The number , , and buttons each have a tactile dot for ease of use.5 CH+ 



: VIDEO 1 input

: VIDEO 2 input

: HDMI input

: RGB input

: (PIP INPUT) Changes the

input mode of the “window”

picture.

: (PIP) Turns the “window”

picture on and off.

: (PIP MOVE) Moves the

location of the “window” picture.

: (PIP STILL) Freezes the

“window” picture.

: (PIP SWAP) Switches between

“main” and “window” picture.



A: Red button

B: Green button

C: Yellow button

D: Blue button



GUIDE: Displays the program

guide (EPG).



LIST: (CAPTION) Displays closed

captioning.



RETURN: Returns to the previous

display/exits the menu.



MENU: Calls up the menu display.



INPUT: Changes the input mode.

 1 – 9, 0, ENTER , (dot):

Changes the channel. For example,

to change to channel 5, press 0 and

5 (or, press 5 and ENTER).



PAGE +/–: (PIP CH +/–) Changes

the channel up/down in the

“window” picture.



FAVORITES: Enables the Favorite

function.



INFO: Displays program

information.



OPTIONS: Displays the options

menu.



RECALL: Selects the channel

previously selected.



CH +/–: Switches the channel up/

down.

Cable set top box/IPTV



: Proceeds to the previous

location.

: Briefly replays the scene

(Flash –).

: Briefly fast forwards the

scene (Flash +).

: Proceeds to the next location.

: Fast reverses.

: Plays.

: Fast forwards.

: Records.

: Pauses.

: Stops.



A, B, C buttons

D: (Live TV) Displays Master

Guide.



GUIDE: Displays the program

guide (EPG).



LIST: Displays the title of recorded

program.



RETURN: Returns to the previous

display/exits the menu.



MENU: Calls up the menu display.



INPUT: Changes the input mode.

  , 1 – 9, 0, ENTER  (dot):

Changes the channel. For example,

to change to channel 5, press 0 and

5 (or, press 5 and ENTER).



PAGE +/–: Page up/down



FAVORITES: Enables the Favorite

function.



INFO: Displays program

information.



OPTIONS: Displays the options

menu.



RECALL: Switches between the

current and previous channel.



CH +/–: Switches the channel up/

down.

Satellite receiver



: Proceeds to the previous

location.

: Briefly replays the scene

(Flash –).

: Briefly fast forwards the

scene (Flash +).

: Proceeds to the next location.

: Fast reverses.

: Plays.

: Fast forwards.

: Records.

: Pauses.

: Stops.



A: Red button

B: Green button

C: Yellow button

D: Blue button



GUIDE: Displays the program

guide (EPG).



LIST: Displays the title of recorded

program/PVR menu.



RETURN: Returns to the previous

display/exits the menu.



MENU: Calls up the menu display.



INPUT: (TV/SAT) Switches the

output between SAT and TV.

  , 1 – 9, 0, ENTER  (dot):

Changes the channel. For example,

to change to channel 5, press 0 and

5 (or, press 5 and ENTER).



PAGE +/–: Page up/down



FAVORITES: Enables the Favorite

function.



INFO: Displays program

information.



OPTIONS: Displays the Satellite

dish menu/Station Index.



RECALL: Tunes to the last tuned

station.



CH +/–: Switches the channel up/

down.

VCR



: Rewinds.

: Plays.

: Fast forwards.

: Records.

: Pauses.

: Stops.



INPUT: Changes the input mode.



1 – 9, 0: Number buttons

: Ejects a tape.



INFO: (DISPLAY) Displays the

playback information.



OPTIONS: (ANT/SW) Switches

the antenna output.



RECALL: (DRIVE SELECT) Selects

the deck.



CH +/–: Switches the channel up/

down.



ENTER: Enters the selected item.

DVD player/recorder



: Skips to the previous

chapter/track.

: Briefly replays the scene

(Flash –).

: Briefly fast forwards the

scene (Flash +).

: Skips to the next chapter/

track.

: Fast reverses.

: Plays.

: Fast forwards.

: Records (for DVD recorder).

: Pauses.

: Stops.



A: (SET UP) Calls up the system/

setup menu.

B: (SUBTITLE) Switches the

subtitle.

C: (AUDIO) Changes the sound.

D: (CLEAR) Clears the setting.



GUIDE: Displays the program

guide (EPG).



LIST: Displays the Title List.



RETURN: Returns to the previous

display/exits the menu.



MENU: Displays the DVD menu.



INPUT: Changes the input mode.



1 – 9, 0: Number buttons



 (dot): (+10) Selects numbers 10

and above.



: Opens/closes the disc tray.



PAGE +: (DVD) Selects the DVD

drive.

PAGE –: (HDD) Selects the

internal HDD (hard disk drive).



FAVORITES: (TOP MENU)

Displays the Top Menu.



INFO: (DISPLAY) Displays the

playback information.



OPTIONS: Displays the options

menu.



RECALL: (DRIVE SELECT)

Switches between HDD and DVD.



CH +/–: Switches the channel up/

down (for DVD recorder).



ENTER: Enters the selected item.

Blu-ray Disc/HD-DVD player



: Skips to the previous

chapter/track.

: Briefly replays the scene

(Flash –).

: Briefly fast forwards the

scene (Flash +).

: Skips to the next chapter/

track.

: Fast reverses.

: Plays.

: Fast forwards.

: Records (for BD recorder).

: Pauses.

: Stops.



A: (SET UP) Calls up the system/

setup menu.

B: (SUBTITLE) Switches the

subtitle.

C: (AUDIO) Changes the sound.

D: (CLEAR) Clears the setting.



GUIDE: Displays the program

guide (EPG).



RETURN: Returns to the previous

display/exits the menu.



MENU: Displays the Pop-up Menu/

Disc Menu.



INPUT: Changes the input mode.



1 – 9, 0: Number buttons



 (dot): (+10) Selects numbers 10

and above.

: Opens/closes the disc tray.



PAGE +: (BD) Selects the BD drive.

PAGE –: (HDD) Selects the

internal HDD (hard disk drive).



FAVORITES: (TOP MENU)

Displays the Top Menu.



INFO: (DISPLAY) Displays the

playback information.



OPTIONS: Displays the options

menu.



ENTER: Enters the selected item.

DVR (digital video recorder)/PVR (personal video recorder)



: Proceeds to the previous

location.

: Briefly replays the scene

(Flash –).

: Briefly fast forwards the

scene (Flash +).

: Proceeds to the next location.

: Fast reverses.

: Plays.

: Fast forwards.

: Records.

: Pauses.

: Stops.



A: (REPLAY ) Enables the Replay *

function for DVR/Replay TV.

B: (Live TV ) Displays Master *

Guide.



GUIDE: Displays the program

guide (EPG).



LIST: Displays the title of recorded

program.



RETURN: Returns to the previous

display/exits the menu.



MENU: Calls up the menu display.



INPUT: Changes the input mode.



1 – 9, 0: Number buttons



 (dot): (+10) Selects numbers 10

and above.



: Opens/closes the disc tray.



PAGE +/–: Page up/down,

Thumbs up/down*



INFO: (DISPLAY) Displays the

playback information.



RECALL: Selects the channel

previously selected.



CH +/–: Switches the channel up/

down.



ENTER: Enters the selected item.

* These buttons correspond to TiVo

service or the Replay service. Refer to

its instruction manual for details.

DVD Home Theater



: Skips to the previous

chapter/track.

: Briefly replays the scene

(Flash –).

: Briefly fast forwards the

scene (Flash +).

: Skips to the next chapter/

track.

: Fast reverses.

: Plays.

: Fast forwards.

: Records.

: Pauses.

: Stops.



A: (SET UP) Calls up the system/

setup menu.

B: (SUBTITLE) Switches the

subtitle.

C: (AUDIO) Changes the sound.

D: (CLEAR) Clears the setting.



GUIDE: Displays the program

guide (EPG).



LIST: Enables the SOUND FIELD

function.



RETURN: Returns to the previous

display/exits the menu.



MENU: Displays the DVD menu.



INPUT: Changes the input mode.



1 – 9, 0: Number buttons



 (dot): (+10) Selects numbers 10

and above.

: Opens/closes the disc tray.



FAVORITES: (TOP MENU)

Displays the Top Menu.



INFO: (DISPLAY) Displays the

playback information.



OPTIONS: Displays the amplifier

menu.



RECALL: (BAND) Selects FM/AM.



CH +/–: Presets or tunes frequency

up/down.



ENTER: Enters the selected item.

CD player



: Selects the previous track.

: Selects the next track.

: Fast reverses.

: Plays.

: Fast forwards.

: Records.

: Pauses.

: Stops.



INPUT: (DISC SKIP) Selects the

next disc.



1 – 9, 0: Selects the track number.

0 selects track 10.



 (dot): (+10) Selects numbers 10

and above.

: Opens/closes the disc tray.



INFO: (DISPLAY) Switches the

display on and off.

Cassette deck



: Rewinds.

: Plays.

: Fast forwards.

: Records.

: Pauses.

: Stops.



A:  Reverses.

D:  Reverses .*



:  Plays .*

:  Pauses .*

:  Fast forwards .*

:  Rewinds .*

LIST: Records .*



INPUT: (DECK A/B) Switches

between deck A and deck B (dual

cassette deck only).



INFO:  Stops .*

* Activated when using a dual cassette

deck (for deck A of Sony device).

Amplifier/receiver



: Fast reverses.

: Plays.

: Fast forwards.

: Records.

: Pauses.

: Stops.



INPUT: Changes the input mode

cyclically.



1: VIDEO 1 input

2: VIDEO 2 input

3: AUX input

4: TUNER input

5: CD input

6: TAPE input

7: MD/DAT input

8: TV input

9: PHONO input

0: DVD input



RECALL: (BAND) Selects FM/AM.



CH +/–: Presets or tunes frequency

up/down.

The indicator SET

lights up.

Produktspecifikationer

Varumärke:	Sony
Kategori:	Fjärrkontroll
Modell:	RM-VZ320
Borrdiameter i stål (max):	13 mm
Borrdiameter i betong (max):	20 mm
Borrdiameter i trä (max):	40 mm
Ljudtrycksnivå:	100 dB
Chuckbredd (max):	13 mm
Ljudnivåosäkerhet:	3 dB
Geluidsvermogensniveau:	111 dB
Vibrationsnivåosäkerhet (metallborrning):	1.5 m/s²