Soundcore Select 3 Bruksanvisning
Soundcore
Vagga/dockningsstation
Select 3
Läs gratis den bruksanvisning för Soundcore Select 3 (4 sidor) i kategorin Vagga/dockningsstation. Guiden har ansetts hjälpsam av 25 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 13 recensioner. Har du en fråga om Soundcore Select 3 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/4
At a Glance
Strap BassUP Button
Power Button
BassUP LED
Power LED Volume Up Button
Bluetooth LED Play/Pause Button
Bluetooth Button USB-C Charging Port
Volume Down Button
Charging Your Speaker
• Use a certified USB-C cable and charger to prevent any damage.
Flashing Red Low Battery
Steady Red Being Charged
Steady White Fully Charged
Powering On / Off
Press or Press and Hold for 2 Seconds
Power On
Steady White
Press and Hold for 2 Seconds
Power Off
Light Off
This speaker will power off automatically after 20 minutes if no device is connected.
Using Your Speaker
Bluetooth Mode
Press the Bluetooth button to enter Bluetooth pairing mode, then select " " from the Bluetooth soundcore Select 3
list to connect.
Select 3
PAIRING
CONNECTED
Press Enter / Exit Bluetooth Pairing Mode
Flashing Blue Bluetooth Pairing
Steady Blue Bluetooth Connected
• To re-enter Bluetooth pairing mode, press the Bluetooth button once.
• This speaker can only play music on one mobile device at a time. To play from another connected device,
pause the device that's currently active first.
• Each time you power on your speaker, it will automatically connect to your last connected device if available
within the Bluetooth range. If not, press the Bluetooth button to enter Bluetooth pairing mode.
PartyCast Mode
You can wirelessly connect up to 100 soundcore speakers equipped with PartyCast function to synchronize audio
and light.
1. Connect a soundcore speaker to your phone via Bluetooth.
2. Press and hold the Bluetooth button on the speaker for 2 seconds to enter PartyCast pairing mode. The
speaker that's currently connected to your phone becomes the primary speaker.
3. Press and hold the Bluetooth button on each soundcore speaker for 2 seconds to enter PartyCast pairing
mode. They will become secondary speakers.
1
2
3
PAIRING
CONNECTED
PAIRING
CONNECTED
> >2s 2s
Press and Hold for 2 Seconds Enter / Exit PartyCast Pairing Mode
Flashing White PartyCast Pairing
Flashing White (Primary Speaker)
PartyCast Connected
Steady White (Secondary Speaker)
• Double-press the Bluetooth button on a secondary speaker to make it the primary speaker.
Button Controls
Press or Press and Hold for 2 Seconds
Power On
Press and Hold for 2 Seconds Power Off
Press Play / Pause
Press Twice Next Track
Press Three Times Previous Track
Press Answer / End a Call
Press and Hold for 2 Seconds Reject a Call
Press
Enter Bluetooth Pairing Mode
Press and Hold for 2 Seconds Enter / Exit PartyCast Pairing Mode
Press Volume Up / Down
Press
Bass On/Off
Produktspecifikationer
| Varumärke: | Soundcore |
| Kategori: | Vagga/dockningsstation |
| Modell: | Select 3 |
Behöver du hjälp?
Om du behöver hjälp med Soundcore Select 3 ställ en fråga nedan och andra användare kommer att svara dig
Vagga/dockningsstation Soundcore Manualer
27 December 2024
10 Augusti 2024
28 Juli 2024
Vagga/dockningsstation Manualer
- Leotec
- Teac
- Ministry Of Sound
- Wavemaster
- T'nB
- Laney
- Auray
- Mophie
- Akai
- X-Zero
- Promate
- Anker
- Gemini
- Jam
- Zalman
Nyaste Vagga/dockningsstation Manualer
5 April 2025
31 Mars 2025
26 Mars 2025
12 Mars 2025
12 Mars 2025
10 Mars 2025
27 Februari 2025
27 Februari 2025
16 Februari 2025
11 Februari 2025