Soundmaster SCD 5401 Bruksanvisning

Soundmaster CD-spelare/brännare SCD 5401

Läs nedan 📖 manual på svenska för Soundmaster SCD 5401 (3 sidor) i kategorin CD-spelare/brännare. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/3

SCD 5400 / 5401 / 5402

DEUTSCH ENGLISH

FRANÇAIS NEDERLANDS

ROMÂNĂ LIETUVIŠKAI

EESTI LATVIEŠU

ESPAÑOL

ENGLISH

ENG 1

1. DBBS Bass Boost

2. Function Selector

3. Volume

4. Display

5. Cassette Recorder Keys

6. CD Door

7. Band Selector FM-ST/FM/AM

8. Handle

9. Tuning Control

10. CD Program

11. CD Skip/Search back-/forward |<< >>|

12. CD Stop

13. CD Play/Pause

14. CD repeat one/all

15. Speakers

16. FM Telescopic Antenna

17. Battery Compartment

18. AC Mains

19. Main power switch ON/OFF

Specification:

FM Frequency 87,5 – 108 MHz

AM Frequency 540 – 1600 KHz

Power Consumption 15 W

AC Power Supply AC 230V / 50Hz

DC Power Supply 8x 1,5V Type UM-1/D

Power Supply

AC Operation

Before operation please ensure VOLTAGE on the set corresponds to VOLTAGE of your local area. Unravel AC Line Cord, insert one

end into AC jack on the set and the other end into a standard AC outlet.

Battery Operation (Batteries not incl.)

Disconnect AC Cord Set completely. Open the Battery Compartment (17) and insert 8x R20/UM-1 “D” size batteries making sure the

indicated battery polarity is observed.

• Do not mix old and new batteries, or different types of batteries.

• Always remove the batteries to prevent damage if there is a battery leakage.

Volume and DBBS

Adjust the sound with the Volume (3) and DBBS (1) controls.

Headphone operation: (Headphone not incl.)

Connect a headphone into the headphone jack (3.5mm Klinke). The sound output will be cut automatically.

ENGLISH

ENG 2

AABC

Radio Operation

1. Switch the main power switch (19) to ON position

2. Slide the Function selector (2) to RADIO

3. Slide the Band selector (7) to a desired setting FM-ST/FM/AM

4. Rotate the Tuning control (9) to find the desired stations

5. When you finish listening, switch the main power switch (19) to OFF position

- FM operation: Pull out the telescopic antenna. Incline and turn the antenna. Reduce its length if the signal is too strong.

- AM operation: The item is provided with a built-in antenna. Direct the antenna by turning the whole set.

Cassette Operation

1. Switch the main power switch (19) to ON position

2. Slide the Function Selector (2) to TAPE

3. Press STOP/EJECT ■ (5) to open the cassette door

4. Press PLAY ◄ (5) to start playback

5. To interrupt playback press || (5). To resume, press the key again

6. By pressing |<< or >>| on the set, fast winding of the tape is possible in both directions

7. To Stop the tape, press STOP/EJECT ■ (5)

8. When you finish listening, switch the main power switch (19) to OFF position

Recording from the radio

1. Slide the Function Selector (2) to RADIO

2. Tune to the desired radio station

3. Insert a suitable cassette into the cassette deck

4. Press RECORD ● (5) to start recording

5. For brief interruptions, press PAUSE || (5). To resume press PAUSE again

6. To stop recording, press STOP/EJECT ■ (5)

Tape deck maintenance

To ensure quality recording and playback of the tape deck, clean parts A, B and C shown in the diagram

beside, after approx. 50 hours of operation. Use a soft cloth slightly moistened with alcohol or a special

head cleaning fluid to clean the deck.

CD Operation

1. Switch the main power switch (19) to ON position

2. Slide the Function Selector (2) to CD

3. Open the CD door (6) and insert a CD/-R/-RW with the printed side facing up and close the CD door

4. Press PLAY/PAUSE on the set to start playback

5. Press >>| (11) once briefly for the next track, or press repeatedly until the desired track number appears in the display

6. Press |<< (11) once briefly to return to the beginning of a current track

7. Press |<< (11) more than once briefly for a previous track

8. To pause playback press PLAY/PAUSE (13) again

9. To stop CD playback, press STOP (12)

10. When you finish listening, switch the main power switch (19) to OFF position

CD repeat

Press 1x REPEAT (14) to repeat the current track

Press 2x REPEAT (14) to repeat all tracks

Press 3x REPEAT (14) to cancel the function

Programming CD track numbers

1. In Stop mode press PROG (10), display shows „PROG“

2. Press |<< >>| (11) for select your desired track

3. When your chosen track number appears, press PROG (10) once to store the track. The display shows prog and prog briefly

followed by your selected track number

4. Repeat steps 2 and 3 to select and store all desired tracks in this way

5. To play your program, press PLAY/PAUSE (13) button

6. To erase a program, press twice STOP (12) button

Produktspecifikationer

Varumärke:	Soundmaster
Kategori:	CD-spelare/brännare
Modell:	SCD 5401
Färg på produkten:	Zilver
Bredd:	35 mm
Djup:	210 mm
Höjd:	25 mm
Snäll:	Draagbare melkopschuimer
Kraftkälla:	Batterij/Accu
Antal batterier/batterier som stöds:	2
Trådlös:	Ja
Mjölktankens kapacitet:	- l
Kan diskas i diskmaskin:	Nee
Batterityp:	AA
Skumningskapacitet:	- ml
Utomhusmaterial:	Roestvrijstaal