Soundskins Rings v3 SSK-RINGS Bruksanvisning
Soundskins
Inte kategoriserad
Rings v3 SSK-RINGS
Läs gratis den bruksanvisning för Soundskins Rings v3 SSK-RINGS (1 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 20 personer och har ett genomsnittsbetyg på 4.2 stjärnor baserat på 10.5 recensioner. Har du en fråga om Soundskins Rings v3 SSK-RINGS eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/1
Recommended Installation Instructions
- Prepping the Surface
We need to start with getting all metal surfaces clean of dust, debris, oil, wax and moisture. For
this we recommend a microfiber clothe, a breathing mask, and a quick drying solvent like
Acetone. If you have some rust it is possible it requires a bit more attention and detail to ensure
good contact. Once all the surfaces have been prepped and properly air dried we can start
applying material. Our material is unique so a household pair of scissors, exact knife, or razor
blade can be used to cut out the patterns.
- Installation
Roll the material out on a flat surface and you can measure the size you will need, (paper or
cardboard can be used to cut templates) after you have made your cut, peel off the white paper
on the back covering the adhesive. When you’re to apply pick a place to start like the top down
so you can work the material all one direction and minimize any trapped air pockets. You can
push the material with your hand a medium pressure outwards till material has a complete
contact. If you see any possible trapped air you can use the point of a razor blade or a sewing
needle to poke a hole and push down material. The main purpose is to ensure the adhesive has
proper contact to the metal surface. Check that any holes that require fastening hardware are
not blocked. Repeat this step for the remainder of the installation and ensure lasting adhesion
with the maximum insulation. If you have questions we can be contacted with the info provided
Soundskins USA
13452 Alondra Blvd, Cerritos, Ca 90703
Phone: 562.689.5151
Email: info@soundskinsglobal.com
www.SoundSkinsGlobal.com
Produktspecifikationer
| Varumärke: | Soundskins |
| Kategori: | Inte kategoriserad |
| Modell: | Rings v3 SSK-RINGS |
Behöver du hjälp?
Om du behöver hjälp med Soundskins Rings v3 SSK-RINGS ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Soundskins Manualer
12 Mars 2025
12 Mars 2025
21 September 2024
21 September 2024
21 September 2024
21 September 2024
21 September 2024
21 September 2024
21 September 2024
21 September 2024
Inte kategoriserad Manualer
- Fisher Price
- Max Pro
- Intermatic
- Nitek
- Teradek
- Trigano
- Aqua Medic
- Brother
- Bopita
- Helight
- Severin
- Jetway
- Primo
- Industrial Music Electronics
- CyberPower
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025