Spacedec SD-WD Bruksanvisning

Läs gratis den bruksanvisning för Spacedec SD-WD (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 21 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 7 recensioner. Har du en fråga om Spacedec SD-WD eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Component Checklist

Step 1. Component Checklist

Check you have received all parts against the Component Checklist above.

Installation Instructions

Wall Mount

Assembly (x1)

Step 2. Installing the Wall Mount Assembly (choose from one of the following options)

For mounting Spacedec to a Timber Stud Wall - Using the Wall Mount Assembly Bracket, mark

the location of the 4 holes and drill using a 4mm drill bit. Secure the bracket to the wall using the M6 Coach

Screws as shown in diagram A.

For mounting Spacedec to a Masonry Wall - Using the Wall Mount Assembly Bracket, mark

the location of the 4 holes and drill using an 8mm masonry drill bit. Secure the bracket to the wall using the M6

Coach Screws and Nylon Anchors as shown in diagram B.

A. Timber Stud WallB. Masonry Wall

Note: This product will suit VESA compliant monitors with 75mm x 75mm (3” x 3”) and 100mm x 100mm (4” x 4”) hole patterns only.

It will support up to a maximum weight of 25kg (55lbs).

Display | Wall Direct

SD-WD

VESA

plate (x1)Hardware

Mounting Fasteners

M4x10mm

Screw (x4)

M4x12mm

Screw (x4)

M4x16mm

Screw (x4)

(Optional)

Security

Screw (x1)M6 Coach

Screws (x4)

Nylon

Anchor (x4)

Combined 3mm

Allen Key and

Phillips-head

Screwdriver (x1)

Wall Mount Assembly

Bracket

M6 Coach

Screw

4 x 4mm

Holes

Wall Material

Stud



TOOLS REQUIRED:

• Power Drill

• Phillips-head Screwdriver

• 4mm (3/16”) Drill Bit

• 8mm (5/16”) Masonry Drill Bit

• 8mm (5/16”) Socket Wrench

or Shifter

Wall Mount Assembly

Bracket

M6 Coach Screw

4 x 8mm

Holes

Masonry Wall

Nylon Anchor

Produktspecifikationer