Speco Technologies HLED31D7W Bruksanvisning
Speco Technologies
övervakningskamera
HLED31D7W
Läs gratis den bruksanvisning för Speco Technologies HLED31D7W (2 sidor) i kategorin övervakningskamera. Guiden har ansetts hjälpsam av 10 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 5.5 recensioner. Har du en fråga om Speco Technologies HLED31D7W eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/2
◈NOTES:
1. Do not install the camera outdoors.
2. Choose a location for the camera which is free o
f
moisture and vibration.
3. Be careful not to scratch the camera lens or dome
cover.
4. Do not operate camera beyond listed temperature
(-49°F~122°F)
5. Handle with care. Dropping it can cause serious
damage to the camera.
6. Avoid any direct sun light into the lens.
7. To avoid shorting or damaging the camera, use
only power supplies which meet the listed
specifications (12VDC / 24VAC Dual voltage, 1A)
◈FEATURE
1. 650 TVL High Resolution Image
2. Smart DNR technology; reduces noise in low light.
3. 75’ range visible in total darkness with 24pcs of IR
LEDs. (Indoor).
4. This camera is flexible to install with its 3-axis
camera construction, this allows for the camera to
be mounted to ceiling, wall or slope surfaces.
5. True Day/Night, camera changes function based
on illumination, IR illuminators in dark (option)
6. 8 individual privacy zones
7. DWDR (Digital Wide Dynamic Range)
8. Multi function: High Light Mask, Lens Shading
Compensation, Smart Motion Detection
9. Smart IR: Objects can be clearly identified due to
the function that decreases screen saturation o
f
objects within a short distance when the IRs are
active.
10. Multi-language OSD.
11. 12VDC / 24VAC Dual Voltage operation.
◈HOW TO INSTALL
1. Opening the dome
Push in the latch button and pull back dome.
(Remove the protection sheet after installation is
completed).
2. Removing the dome
Lift the dome. W hen you push the latch button, it is
unlocked and you can lift the dome.
3. Camera installation
a. Mount the camera set with the supplied screws on
ceiling or wall.
It is recommended to utilize the supplied screws.
<Ceiling mount>
<Wall mount>
b. Please refer to Section 4 for details on Camera angl
e
adjustments
c. Lens adjustment (Vari-focal Lens only)
After opening the LED cover,
① By turning the “Tele-
Wide” knob, you ca
n
access a range of foca
l
lengths within specifie
d
limits.
②Once the focal length i
s
determined, turn the
“Near-Far” knob to se
t
the focus for the desire
d
scene.
d. Re-assemble the camera.
4. Camera angle adjustment
a. Pan adjustment: Turn the disk of camera and the
n
adjust direction to the right or left (-180˚ to 180˚)
b. Tilt adjustment: Turn the camera holder (shown
below) to adjust the direction up or down (6 to˚
90˚)
c. Roll adjustment: Rotate the camera holder (-178˚
to 178 ) ˚
<Caution> If the camera is adjusted beyond the
angle limit, it may cause damage to the camera.
◈ASSEMBLY
◈DIMENSION
◈
SPECIFICATION
Model No.
HLED31D7B
HLED31D7W
HLED31D1B
HLED31D1W
Image Sensor 1/3" COLOR SONY SUPER HAD CCD II
Effective Pixel 768(H) x 494(V) Pixel
Cell Size
6.35
㎛
(H) x 7.4
㎛
(V)
Scanning System 2 : 1 Interlace
Sync. Type Internal
Resolution 650 TV-Line
S/N 52dB or More(AGC OFF)
Video Output 1.0 Vp-p(Sync. Negative) Termination 75 Ω
Min. Illumination
0.01Lux(F/1.2)
0Lux (75’ Range with 24pcs LED) - Indoor
Gamma γ = 0.45 typ.(0.2 ~ 1.0)
OSD Yes(Multi Language)
White Balance ATW(2,500°K ~ 9,500°K)/MANUAL/AWC
Shutter Speed 1/60 ~ 1/100,000sec
Sense up Auto(Selectable limit 2X~1024X)/FIXED/OFF
Backlight OFF/BLC/HLC/DWDR
AGC LOW/MIDDLE/HIGH/OFF
DNR(3D) AUTO/LOW/MIDDLE/HIGH/OFF
Motion Detection ON/OFF(4 Zone)
Privacy Zone ON/OFF(8 Zone)
Mirror ON/OFF
Day & Night AUTO, COLOR, B/W
LED Brightness 24pcs, Smart IR
Blemish
Compensation
AUTO/OFF
Lens f = 3.6mm f = 2.8 ~ 12mm
Power Supply 12V DC / 24VAC Dual Voltage
Current Consumption Max. 600mA (at 12VDC / 24VAC)
Operation Temp. -49°F~122°F
Dimension Ø130.8(W) x 96(H) mm
Weight 14.5 oz
※The specification is subject to change without any prior
notice to improve the quality.
◈FUNCTION SETTING
1. How to use the jog lever
①SET : Used to access the menu and confirm
selection.
②
UP, DOWN :③ Used to move the cursor to up or
down.
④LEFT, RIGHT :⑤ Used to move the cursor to left
or right and change the value.
⑥
EXT-VIDEO : Additional video output terminal for
test monitor during installation.
⑦DEBUG PORT : It is used for upgrading the product
function and after-sales services.
HLED31D1B, HLED31D1W
HLED31D7B, HLED31D7W
ROTATION
U
D
R
L
LED COVER
DISK
CAMERA
HOLDER
DOME COVER ASS’Y
CAMERA
MODULE ASS’Y
SCREW
HARNESS
LED COVER
ASS’Y
SCREW
CONTROL PCB ASS’Y
PUSH BUTTON
DISK
BASE
CABLE
Ø109
48.1
101
Ø130.8
Ø100
Protection sheet
LATCH BUTTON
SCREW TP1
3.5X20 2EA
SCREW TP1
3.5X20 2EA
Produktspecifikationer
| Varumärke: | Speco Technologies |
| Kategori: | övervakningskamera |
| Modell: | HLED31D7W |
Behöver du hjälp?
Om du behöver hjälp med Speco Technologies HLED31D7W ställ en fråga nedan och andra användare kommer att svara dig
övervakningskamera Speco Technologies Manualer
6 Oktober 2025
16 Augusti 2025
16 Augusti 2025
16 Augusti 2025
16 Augusti 2025
16 Augusti 2025
15 Augusti 2025
15 Augusti 2025
15 Augusti 2025
15 Augusti 2025
övervakningskamera Manualer
- Seneca
- Nivian
- Advantech
- Monoprice
- ClearOne
- IC Intracom
- Wisenet
- TCP
- Minox
- InFocus
- Kerbl
- IPX
- BZBGear
- Vosker
- SereneLife
Nyaste övervakningskamera Manualer
23 Oktober 2025
20 Oktober 2025
20 Oktober 2025
19 Oktober 2025
19 Oktober 2025
19 Oktober 2025
19 Oktober 2025
18 Oktober 2025
14 Oktober 2025
14 Oktober 2025