Speco Technologies O4P3X Bruksanvisning
Läs gratis den bruksanvisning för Speco Technologies O4P3X (60 sidor) i kategorin övervakningskamera. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 2 recensioner. Har du en fråga om Speco Technologies O4P3X eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/60
User Manual
PTZ Network Camera
O4P3X
Please read this instruction carefully before operating the unit and keep it for further reference
1. Electrical safety
All installation and operation here should conform to local electrical safety codes.
Use a certified/listed 12VDC Class2 or adequate PoE switch.
Improper handling and/or installation could run the risk of fire or electrical shock.
2. Environment
Do not expose the unit to heavy stress, violent vibration or long-term exposure to water and humidity during transportation,
storage, and/or installation.
Do not install near sources of heat.
Only install the product in environments inside the specification operating temperature and humidity range.
Do not install the camera near power lines, radar equipment or other electromagnetic radiation.
Do not block any ventilation openings if any.
Use allthe weatherproofing hardware requirement to minimize weather intrusion.
Caution: Be mindful when positioning the camera as its built-in illumination may cause temporary glare to approaching drivers.
3. Operation and Daily Maintenance
Please shut down the device and then unplug the power cable before you begin any maintenance work.
Do not touch the CMOS sensor optic component. You can use a blower to clean the dust on the lens surface.
Always use a dry soft cloth to clean the device. If there is too much dust, use a cloth dampened with a small quantity of neutral
detergent. Finally use a dry cloth to clean the device.
Please use a professional optical cleaning method to clean the enclosure. Improper enclosure cleaning (such as using cloth) may
result in poor IR functionality and/or IR reflection.
The grounding holes of the product are recommended to be grounded to further enhance the reliability of the camera.
The dome cover is an optical device, please don’t touch or wipe the cover surface directly during installation and use, please refer
to the following methods if dirt is found.
Stained with dirt:
Use an oil-free soft brush or hair dryer to remove it gently.
Stained with grease or fingerprint
Use oil-free cotton cloth or paper soaked with alcohol or detergent to wipe from the lens center outward. Change a cloth and
wipe several times if it is not clean enough.
Warning
This camera should be installed by qualified personnel only.
All the examination and repair work should be done by qualified personnel.
Any unauthorized changes or modifications could void the warranty.
Statement
This guide is for reference only.
Product, manuals, and specifications may be modified without prior notice. Speco Technologies reserves the right to modify these
without notice and without incurring any obligation.
Speco Technologies is not liable for any loss caused by improper operation.
Produktspecifikationer
| Varumärke: | Speco Technologies |
| Kategori: | övervakningskamera |
| Modell: | O4P3X |
Behöver du hjälp?
Om du behöver hjälp med Speco Technologies O4P3X ställ en fråga nedan och andra användare kommer att svara dig
övervakningskamera Speco Technologies Manualer
6 Oktober 2025
16 Augusti 2025
16 Augusti 2025
16 Augusti 2025
16 Augusti 2025
16 Augusti 2025
15 Augusti 2025
15 Augusti 2025
15 Augusti 2025
15 Augusti 2025
övervakningskamera Manualer
- Logilink
- Simrad
- Compro
- Abus
- ZKTeco
- Tapo
- Uniden
- Equip
- Ferguson
- Kramer
- ClearOne
- Advantech
- Flamingo
- Sentry360
- ORNO
Nyaste övervakningskamera Manualer
6 Oktober 2025
6 Oktober 2025
6 Oktober 2025
6 Oktober 2025
6 Oktober 2025
6 Oktober 2025
6 Oktober 2025
6 Oktober 2025
6 Oktober 2025
6 Oktober 2025