Speco Technologies O8LMST1 Bruksanvisning


Läs gratis den bruksanvisning för Speco Technologies O8LMST1 (51 sidor) i kategorin fotokamera. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 1.5 recensioner. Har du en fråga om Speco Technologies O8LMST1 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/51
8MP Panoramic Network Camera
User Manual
O8LMST1
Please read this manual carefully before operating the unit and keep it for further reference
Important Safeguards and Warnings
1. Electrical safety
All installation and operation here should conform to local electrical safety codes.
Use a certified/listed 12VDC Class2 power supply or adequate PoE switch.
Improper handling and/or installation could run the risk of fire or electrical shock.
2. Environment
Do not expose the unit to heavy stress, violent vibration or long-term exposure to water and humidity during transportation,
storage, and/or installation.
Do not install near sources of heat.
Only install the product in environments inside the specification operating temperature and humidity range.
Do not install the camera near power lines, radar equipment or other electromagnetic radiation.
Do not block any ventilation openings if any.
Use allthe weatherproofing hardware requirement to minimize weather intrusion.
Caution: Be mindful when positioning the camera as its built-in illumination may cause temporary glare to approaching drivers.
3. Operation and Daily Maintenance
Please shut down the device and then unplug the power cable before you begin any maintenance work.
Do not touch the CMOS sensor optic component. You can use a blower to clean the dust on the lens surface.
Always use a dry soft cloth to clean the device. If there is too much dust, use a cloth dampened with a small quantity of neutral
detergent. Finally, use a dry cloth to clean the device.
Please use a professional optical cleaning method to clean the enclosure. Improper enclosure cleaning (such as using cloth) may
result in poor IR functionality and/or IR reflection.
The grounding holes of the product are recommended to be grounded to further enhance the reliability of the camera.
The dome cover is an optical device, please do not touch or wipe the cover surface directly during installation and use, please
refer to the following methods if dirt is found.
Stained with dirt:
Use an oil-free soft brush or hair dryer to remove it gently.
Stained with grease or fingerprint.
Use oil-free cotton cloth or paper soaked with alcohol or detergent to wipe from the lens center outward. Change the cloth and
wipe it several times if it is not clean enough.


Produktspecifikationer

Varumärke: Speco Technologies
Kategori: fotokamera
Modell: O8LMST1

Behöver du hjälp?

Om du behöver hjälp med Speco Technologies O8LMST1 ställ en fråga nedan och andra användare kommer att svara dig