Speco Technologies O8VLD1 Bruksanvisning
Läs gratis den bruksanvisning för Speco Technologies O8VLD1 (11 sidor) i kategorin övervakningskamera. Guiden har ansetts hjälpsam av 13 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 7 recensioner. Har du en fråga om Speco Technologies O8VLD1 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/11

Quick Start Guide
8MP IP Vandal Dome Camera
O8VLD1
Version 1.0

i
Welcome
Thank you for purchasing this network camera!
This manual is designed to be a reference tool for your system. owner’s
Please read this manual carefully before operang the unit and retain it for future reference.
Should you require any technical assistance, please contact Speco Technologies Technical Support.

ii
Important Safeguards and Warnings
1 Electrical safety
.
.
.
..
All installaon and operation here should conform to local electrical safety codes.
Use a certied/listed 12VDC Class 2 power supply only.
Please note: Do not connect two power supplying sources to the device at the same me; it may result in
device damage! The product must be grounded to reduce the risk of electric shock.
Improper handling and/or installaon could run the risk of re or electrical shock.
2 Environment
.
.
.
..
Heavy stress, violent vibraon or exposure to water is not allowed during transportaon, storage and
installation.
This product should be installed in a cool, dry place away from direct sunlight and heat sources.
Do not install the product in extreme temperature conditions.
Do not expose the camera to electromagnec radiaon. Otherwise it may result in CMOS sensor failure.
Do not block any venlation openings.
Do not allow water and liquid intrusion into the camera.
3. Operaon and Daily Maintenance
Please shut down the device and then unplug the power cable before you begin any maintenance work.
Do not touch the CMOS sensor opc component. You can use a blower to clean the dust on the lens surface.
Always use the dry so cloth to clean the device. If there is too much dust, use a cloth dampened with a small
quanty of neutral detergent. Finally use the dry cloth to clean the device.
Please use a professional opcal cleaning method to clean the enclosure. Improper enclosure cleaning (such as
using cloth) may result in poor IR functionality and/or IR reecon.
The grounding holes of the product are recommended to be grounded to further enhance the reliability of the
camera.
Dome cover is an opcal device, please don’t touch or wipe cover surface directly during installaon and use,
please refer to the following methods dirt is found: if
Stained with dirt
Use oil-free so brush or hair dryer to remove it gently.
Stained with grease or ngerprint
Use oil-free coon cloth or paper soaked with alcohol or detergent to wipe from the lens center outward.
Change the cloth and wipe several mes if it is not clean enough.
Warning
This camera should be installed by qualied personnel only.
All the examinaon and repair work should be done by qualied personnel.
Any unauthorized changes or modicaons could void the warranty.
Produktspecifikationer
Varumärke: | Speco Technologies |
Kategori: | övervakningskamera |
Modell: | O8VLD1 |
Behöver du hjälp?
Om du behöver hjälp med Speco Technologies O8VLD1 ställ en fråga nedan och andra användare kommer att svara dig
övervakningskamera Speco Technologies Manualer
8 Januari 2025
8 Januari 2025
27 Oktober 2024
27 Oktober 2024
23 September 2024
9 September 2024
7 September 2024
7 September 2024
6 September 2024
6 September 2024
övervakningskamera Manualer
- Blow
- Uniden
- EFB Elektronik
- TCP
- Laserliner
- V-Tac
- Advantech
- Security Labs
- Alecto
- UniView
- Nextech
- Axis
- Lanberg
- Securetech
- Hawking Technologies
Nyaste övervakningskamera Manualer
15 Juni 2025
14 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
12 Juni 2025