Speco Technologies SPCDC6 Bruksanvisning


Läs gratis den bruksanvisning för Speco Technologies SPCDC6 (2 sidor) i kategorin högtalare. Guiden har ansetts hjälpsam av 26 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 13.5 recensioner. Har du en fråga om Speco Technologies SPCDC6 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/2
Where To Place Your In-Ceiling Speakers
Placement can make all the difference in how your speakers sound, and how easy they will be to
install. Carefully consider where your speakers should be positioned. For optimum performance,
speakers should be mounted to the left and right of the main listening area and a minimum of 8 to
10 feet apart (See Fig. 2). Avoid mounting speakers in stud cavities containing electrical wiring,
heating ducts, water pipes, etc. Make sure the ceiling materials are sturdy enough to support the
weight of the speakers.
Adjustable Tweeters (Fig. 3)
The tweeter in your Speco speak
er may be adjusted, allowing you to tailor the speaker to better fit the
listening area. The overall smoothest response is achieved with the tweeter facing straight out; how-
adjust the tweeter, grasp the outside of the tweeter plate and gently pivot it toward the listening area.
Speaker Installation In Existing Construction (See Fig. 4)
Once you have selected the location for your speakers, you are ready to install them.
You will need the following:
Stud Finder Drill & Drill Bits • Wire Cutter/ Strippers Speaker Wire
Pencil Phillips Screwdriver Utility Knife or Drywall Saw Masking Tape
Speco recommends the use of 16-gauge wire minimum. For wire options, consult your retailer or
custom audio contractor.
1. Speco Speakers are designed to be installed in the ceiling or wall area between studs. Using a stud
f
inder, make sure you are between two studs. Tape the supplied template to the wall and lightly trace
ar
ound the inside with a pencil.
2. Cut the hole using your drywall saw. You may want to start with a small hole in the center of the
outline. This will allow you to check for any obstructions that may exist behind the desired location.
CAUTION: Be certain electrical wiring, water pipes or heating ducts do not interfere in the planned
installation areas prior to drilling or cutting the wall.
3. Run speaker wire from your amplifier or speaker switching device to the speaker location.
4. Car
efull
y r
emo
v
e the g
rille and inner grille backing by simply pulling it away from the magnetic
baf
fle. (Note: The open cell
foam inner grille backing
is designed to hide speak
er
components from view
and ma
y be r
emo
ved if
desired.) If you like the
standard white finish of
your Speco speakers grille,
skip to ste
p 5,
b
ut if y
ou
want your speakers to
blend in with a colored
w
all or ceiling, now is
the time to paint your
Congratulations on choosing Speco
Architectural Loudspeakers. Like all
Speco products, great care has been taken
in their design. Their combination of
advanced engineering and state-of-the-art
materials will provide you with years of
listening pleasure, while blending
smoothly into your home’s decor. Before
you get started, it is a good idea to identify
all the parts and hardware (See Fig. 1).
Speaker with self-contained
mounting clamps
Metal grille with foam
inner grille cover
FIG. 2
Speco ceiling speak can be used as rearers
surround channels by mounting them (1)
on eac
h side of (2) just behind or (3) in, ,
back of the viewing position.
1
1
2
2
3
3
FIG. 3
(Contin
ued on r
e
verse)
Model SPCDC6
6
1
/
2
˝ Two-Way In-Ceiling Speaker Systems
Cutout template
Pi
v
oting
tweeter
FIG. 1
FIG. 4
speaker’s perforated grille.


Produktspecifikationer

Varumärke: Speco Technologies
Kategori: högtalare
Modell: SPCDC6

Behöver du hjälp?

Om du behöver hjälp med Speco Technologies SPCDC6 ställ en fråga nedan och andra användare kommer att svara dig