Speco Technologies VLD6M Bruksanvisning


Läs gratis den bruksanvisning för Speco Technologies VLD6M (8 sidor) i kategorin Kamera. Guiden har ansetts hjälpsam av 10 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 5.5 recensioner. Har du en fråga om Speco Technologies VLD6M eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/8
User Manual
Thank you for purchasing our product. Speco Technologies is constantly developing and
improving products. We reserve the right to modify product design and specifications
without notice and without incurring any obligation.
VLB5 /VLB6/ / VLD5 VLD6M
Warnings
Speco Technologies is not responsible for any problems caused by improper operation or repair.
Make sure the power supply voltage is correct before using the camera.
Do not drop the camera or subject it to physical shock.
Do not use the device beyond specified voltage range.
Do not place the camera in extremely hot, cold (the operating temperature shall be (-4˚F~122˚F), dusty or
damp locations, and do not expose it to high electromagnetic radiation.
To avoid heat accumulation, good ventilation is required for operating environment.
If the product does not work properly, please contact the dealer or where the product was purchased.
Keep away from liquid while in use.
sensitivity, low noise and distortion and supports HD video transmission with the common coaxial cable,
ensuring the requirement of the HD monitoring in the traditional surveillance system.
This camera series is the latest technology and advanced circuit design, which features high definition and
Introduction
High Resolution
Adopt high performance sensor, providing high definition and clear image.
High Transmission Performance
Real time transmission with high speed and long distance- .
DNR
Reduce noise from brightness and color signal .
OSD
Access the camera settings which can be clearly displayed through the main menu.
White Balance
Adjust the color temperature according to the environment automatically.
ICR Auto Switch
The filter will filter infrared light during the daytime and change to normal at night to
ensure a high sensitivity and clear image .
AGC
Adjust the gain of amplifier, enabling the camera to output the standard video signal in different
lighting condition.
Wide Dynamic Range (WDR)
When there are both very bright and very dark areas simultaneously in the field of view, this function
will balance the brightness level and provide clear images.
1
Backlight Compensation BLC ( )
When the back of the captured object is too much bright, you can set BLC for the captured object to
make it clearer.
Cables
Power Cable
Video Output
Video Switch Cable
Video Switch: F our video output modes can be optional--AHD, TVI, CVI and CVBS
(a) remove the cover of the video switch cable; (b) hold and press the button in the video
switch cable for 5 seconds to switch the current video output.
2
Before you start, please make sure that the wall or ceiling is s tro ng e nou gh to w it hst and t hr ee ti mes
th e w eig ht o f t he camera. Please install and use the camera in the dry environment.
Youd better install back the lens cover or lower dome less than 4 hours after removing it.
The mounting types of cameras are only for reference.
Installation
Mounting for VLB5/VLB6
1. Drill the screw holes and the cable hole on the wall according to the drill template.
VLB6
48mm
48mm
4.5
VLB5
4.6
48mm
48mm


Produktspecifikationer

Varumärke: Speco Technologies
Kategori: Kamera
Modell: VLD6M

Behöver du hjälp?

Om du behöver hjälp med Speco Technologies VLD6M ställ en fråga nedan och andra användare kommer att svara dig