Speco Technologies ZIPKIT4D1 Bruksanvisning
Speco Technologies
övervakningskamera
ZIPKIT4D1
Läs gratis den bruksanvisning för Speco Technologies ZIPKIT4D1 (108 sidor) i kategorin övervakningskamera. Guiden har ansetts hjälpsam av 9 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 5 recensioner. Har du en fråga om Speco Technologies ZIPKIT4D1 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/108
User Guide (Ver. 1.2)
Models: ZIPKIT4D1
Network Video Recorder and IP Camera
About This User’s Guide
Before operating the unit, please read this user’s guide thoroughly and retain it for future reference.
2
Cautions
Explanation of Graphical Symbols
WARNING
To reduce a risk of fire or electric shock, do not expose this product to rain or moisture.
CAUTION
Changes or modifications not approved by the manufacture will void the warranty of the product.
Using an incompatible battery may increase the risk of fire or explosion.
Replace only with the same or equivalent type battery recommended by the manufacture.
Discard used batteries according to manufacturer’s instructions.
This symbol indicates the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the product.
This symbol indicates the presence of “dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude to constitute a risk of electric
shock, property damage, personal injury, or death.
3
These precautions must be followed for safety reasons
Warning
Do not use if the unit emits smoke.
Do not disassemble the unit.
Do not place any heavy or sharp objects on the unit.
Do not place on uneven surface.
Do not expose to shock or vibration.
Do not move the unit when the unit is powered on.
Do not block, and allow dust to accumulate in the air vents.
Do not restrict airflow of the unit; doing so can damage the unit.
Only qualified and experienced personnel should perform installation and
servicing.
Turn off the power of the ZS when connecting Cameras, Audio or Sensor
Cables.
The manufacturer is not responsible for any damage caused by improper use
of the product or failure to follow instructions for the product.
The manufacturer is not responsible for any problems caused by or resulting
from the user physically opening the ZS for examination or attempting to repair
the unit.
For ZS models with the PoE Switch, it is strongly recommended that the 48V
connector is inserted to the PoE Switch before the AC cable is attached to the
adaptor.
Produktspecifikationer
| Varumärke: | Speco Technologies |
| Kategori: | övervakningskamera |
| Modell: | ZIPKIT4D1 |
Behöver du hjälp?
Om du behöver hjälp med Speco Technologies ZIPKIT4D1 ställ en fråga nedan och andra användare kommer att svara dig
övervakningskamera Speco Technologies Manualer
8 Januari 2025
8 Januari 2025
27 Oktober 2024
27 Oktober 2024
23 September 2024
9 September 2024
7 September 2024
7 September 2024
6 September 2024
6 September 2024
övervakningskamera Manualer
- Friedland
- SereneLife
- Kramer
- Ganz
- Hikvision
- Aida
- Megasat
- Oplink
- E-bench
- Siedle
- Abus
- Blaupunkt
- Compro
- Caliber
- SecurityMan
Nyaste övervakningskamera Manualer
15 Juni 2025
14 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
12 Juni 2025