Speedlink SL-8904-RD - CUBID Bruksanvisning
Läs gratis den bruksanvisning för Speedlink SL-8904-RD - CUBID (2 sidor) i kategorin högtalare. Guiden har ansetts hjälpsam av 34 personer och har ett genomsnittsbetyg på 3.5 stjärnor baserat på 17.5 recensioner. Har du en fråga om Speedlink SL-8904-RD - CUBID eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/2

1. Laden Sie den Lautsprecher auf: Verbinden Sie ihn dafür über das Ladekabel mit einer USB-Stromquelle (500 mA). Der
Ladevorgang dauert ca. 2-3 Stunden; die rückseitige LED leuchtet dabei rot. Das Auaden ist während der Benutzung möglich.
2. Schalten Sie den Lautsprecher ein („ON“); die LED blinkt blau. Es ertönt ein akustisches Signal. Der Lautsprecher ist nun 5
Minuten bereit für das Pairing.
3. Stellen Sie über Ihr Smartphone oder Ihren Tablet-PC die Bluetooth®-Verbindung zum Lautsprecher („SPEEDLINK CUBID“)
her. Dieser Vorgang unterscheidet sich je nach Gerät. Sollte eine Code-Eingabe verlangt werden, geben Sie bitte die
Zahlenkombination 0000 ein. Die LED leuchtet anschließend konstant blau. Die Verbindung wird künftig nach Aus- und
Einschalten automatisch mit dem zuletzt verbundenen Gerät wiederhergestellt, wenn dies in Reichweite ist
(dauert ca. 5 Sekunden).
4. Alternativ können Sie den Lautsprecher über das Audio-Kabel an eine Audio-Quelle anschließen (3,5 mm).
5. Stellen Sie die Lautstärke direkt an der Quelle ein.
6. Das integrierte Mikrofon kann für die Freisprechfunktion verwendet werden. Bitte beachten Sie, dass diese Funktion nur
verfügbar ist, wenn eine Bluetooth®-Verbindung mit Ihrem Tablet oder Smartphone besteht.
7. Sobald die Leistung nachlässt, laden Sie den Lautsprecher bitte erneut auf. Bei Nichtgebrauch schalten Sie den Lautsprecher
einfach ab („OFF“), um Strom zu sparen.
Quick install Guide
1. Charge the speaker by connecting it to a USB power source (500mA) using the supplied charging cable. Charging takes
around 2-3 hours during which time the rear LED will glow red. You can use the device while charging it.
2. Switch the speaker ON – the LED will ash blue and a tone will be emitted. The speaker will now be ready for pairing
for 5 minutes.
3. Pair your smartphone or tablet with the speaker (SPEEDLINK CUBID) via Bluetooth®.
This process differs depending on your device. If prompted, enter the code 0000. The LED will then glow solid blue. When you
switch the speaker off and on again in future, the connection to the last connected device will be restored automatically if it is
within range (takes approx. 5 seconds).
4. Alternatively, connect the speaker to an audio source (3.5mm) using the supplied audio cable.
5. Adjust the volume on the audio source directly.
6. The integrated microphone can be used for hands-free calls. Please note: this function is only available when connected via
Bluetooth® to your tablet or smartphone.
7. As soon as you notice a drop in performance, recharge the speaker. If you do not intend to use the speaker, simply switch it
OFF to save power.
TECHNICAL SUPPORT
Having technical problems with this product?
Get in touch with our Support team – the quickest way
is via our website: www.speedlink.com.
©2014 Jöllenbeck GmbH. All rights reserved. SPEEDLINK
®
,
the SPEEDLINK word mark and the SPEEDLINK swoosh are
registered trademarks of Jöllenbeck GmbH. The Bluetooth
®
word mark and logos are registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by Jöllenbeck GmbH is under
license. All trademarks are the property of their respective owner.
Jöllenbeck GmbH shall not be made liable for any errors that may ap-
pear in this manual. Information contained herein is subject to change
without prior notice. Please keep this information for later reference.
JÖLLENBECK GmbH, Kreuzberg 2, 27404 Weertzen, GERMANY
sl-8904-Rd // VeRs. 1.0
Produktspecifikationer
| Varumärke: | Speedlink |
| Kategori: | högtalare |
| Modell: | SL-8904-RD - CUBID |
| Enhetsplacering: | Ingebouwd |
| Färg på produkten: | Wit |
| Dörrgångjärn: | Rechts |
| Inbyggd display: | Nee |
| Vikt: | 42000 g |
| Bredd: | 540 mm |
| Djup: | 540 mm |
| Höjd: | 1452 mm |
| Nettoskatt: | 100 W |
| Ismaskin: | Nee |
| Ljudnivå: | 39 dB |
| Energie-efficiëntieklasse: | F |
| Årlig-energiförbrukning: | 219 kWu |
| Förpackningens vikt: | 47007 g |
| Förpackningens bredd: | 575 mm |
| Djuppackning: | 560 mm |
| Förpackningshöjd: | 1506 mm |
| Frys bruttokapacitet: | 36 l |
| Frys nettokapacitet: | 36 l |
| Fryskapacitet: | 2.4 kg/24u |
| Dörröppningsriktning utbytbar: | Nee |
| Lämplig för paneljustering: | Nee |
| Kylskåpets nettokapacitet: | 169 l |
| No Frost (kylskåp): | Nee |
| Kylskåp invändig belysning: | Ja |
| Typ av lampa: | LED |
| Multi-luftvägssystem (kylskåp): | Nee |
| Antal hyllor i kylskåp: | 4 |
| Antal-grönsakslådor: | 1 |
| No Frost (frys): | Nee |
| Retentionstid vid strömavbrott: | 18 uur |
| Snabbfrysfunktion: | Nee |
| Antal fryshyllor: | 1 |
| antal stjärnor: | 4* |
| Total nettokapacitet: | 205 l |
| Temperaturlarm: | Nee |
| Äggställ: | Ja |
| Total bruttokapacitet: | 205.7 l |
| Hyllmaterial: | Glas |
| Till fackområdet: | Nee |
| Larm för öppen dörr: | Nee |
| Kylmedium: | R600a |
| Klimaatklasse: | N-ST |
| Bulleremissionsklass: | C |
| Justerbara fötter: | Nee |
| Iskross: | Nee |
| Vattendispenser: | Nee |
| AC-ingångsspänning: | 220 - 240 V |
| AC-ingångsfrekvens: | 50 Hz |
| Energieffektivitetsskala: | A tot G |
Behöver du hjälp?
Om du behöver hjälp med Speedlink SL-8904-RD - CUBID ställ en fråga nedan och andra användare kommer att svara dig
högtalare Speedlink Manualer
8 September 2024
4 September 2024
28 Augusti 2024
28 Augusti 2024
19 Augusti 2024
högtalare Manualer
- Rockford Fosgate
- Power Dynamics
- R-MUSIC
- GGMM
- Italian Stage
- Thonet & Vander
- Malone
- Avantone Pro
- Tellur
- AQL
- Vifa
- Soen
- Lanzar
- Definitive Technology
- Ecler
Nyaste högtalare Manualer
23 Oktober 2025
20 Oktober 2025
19 Oktober 2025
19 Oktober 2025
19 Oktober 2025
19 Oktober 2025
19 Oktober 2025
19 Oktober 2025
19 Oktober 2025
18 Oktober 2025