SPL HPm Bruksanvisning
Läs nedan 📖 manual på svenska för SPL HPm (16 sidor) i kategorin mottagare. Denna guide var användbar för 20 personer och betygsatt med 4.7 stjärnor i genomsnitt av 10.5 användare
Sida 1/16
Headphone Monitoring Amplier
Headphone monitoring amplier with Phonitor Matrix
for two headphones as 500 Series module
EN
2 HPm – 500 Series
Introduction
Developer
Bastian Neu
Version 2.0 – 12/2022
This manual contains a description of the product. In no way it represents a guarantee
of particular characteristics or results of use. The information in this document has
been carefully compiled and veried and, unless otherwise stated or agreed upon,
correctly describes the product.
Specications are subject to change without notice.
Specications
General
Frequency range (-3 dB): 10 Hz – 100 kHz
Common mode rejection (1 kHz, 0 dBu ): > 82 dB
THD + N (0 dBu, 10 Hz – 22 kHz): 0.03%
Noise (A-weighted): -92.3 dBu
Dynamic range: 113 dB
Input & Output (balanced)
Input impedance: 10 kΩ
Output Impedance: 150 Ω
Headphone Outputs, 1/4" (6,35 mm) TRS Jacks
Max output power (600 Ω) +18 dBu
Max output power (300 Ω) +15 dBu
Max output power (32 Ω) +5 dBu
HPm – 500 Series 3
Scope of Delivery
HPm module, 500 Series
Manual
Measurement & Weight
Double-slot module, 500 Series
Weight: 1.76 lbs (0.8 kg)
Please keep the original packaging. In a service case the original packaging ensures a
safe transport.
Installation
Installation into a 500 Series rack:
• Please read the manual that comes with the 500 Series rack. You should receive all
necessary information for the installation process.
• For the installation or exchange of HPm, your 500 Series rack should be switched
o and the power cable should not be connected.
• Insert the HPm module into two adjacent free slots of your rack. Make sure the
connectors of the HPm is precisely aligned with the rack connectors.
• Press the HPm module carefully into the rack connectors and tighten the screws.
• Connect the HPm module with your audio environment using the connections from
your 500 Series rack.
• Connect Headphones.
• Insert the power cable to the 500 Series rack and switch it on.
EN
Produktspecifikationer
| Varumärke: | SPL |
| Kategori: | mottagare |
| Modell: | HPm |
Behöver du hjälp?
Om du behöver hjälp med SPL HPm ställ en fråga nedan och andra användare kommer att svara dig
mottagare SPL Manualer
30 December 2025
25 September 2024
25 September 2024
25 September 2024
25 September 2024
25 September 2024
25 September 2024
25 September 2024
25 September 2024
6 September 2024
mottagare Manualer
- mottagare Velleman
- mottagare FoneStar
- mottagare Pro-Ject
- mottagare Rockford Fosgate
- mottagare DBX
- mottagare Lanzar
- mottagare DIO
- mottagare Sharp
- mottagare Cerwin-Vega
- mottagare WyreStorm
- mottagare Powersoft
- mottagare BZBGear
- mottagare Camille Bauer
- mottagare The T.amp
- mottagare Cabasse
Nyaste mottagare Manualer
1 Juni 2025
1 Juni 2025
30 Maj 2025
30 Maj 2025
9 April 2025
9 April 2025
5 April 2025
4 April 2025
2 April 2025
2 April 2025