SSV Works WP-RZO + 2 Bruksanvisning

SSV Works högtalare WP-RZO + 2

Läs gratis den bruksanvisning för SSV Works WP-RZO + 2 (2 sidor) i kategorin högtalare. Guiden har ansetts hjälpsam av 30 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 15.5 recensioner. Har du en fråga om SSV Works WP-RZO + 2 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/2
Tools Needed For Installaon
WP-RZO + 2
POLARIS RZR OVERHEAD 2 SPEAKER ADD ON
Drill with Drill bits
Phillips Head Screwdriver
Wire Crimpers / Strippers
Thread locker
1) From the underside of the cage, place the enclosure into the rear cage area.up
2) While holding the enclosure in place, put one of the brackets on top of the enclosure and using the
screws provided. Screw into the threaded insert on the enclosure. Do not over tighten the screws. (it is
recommended to use -Tight or another type of thread locker to prevent the screws from Loc
loosening)
3) Repeat for the second bracket
4) This is an step that can be done if you desire, Using a drill and drill bit, pre drill the holes for the optional
screws to mount the brackets to the cage, Once the holes are pre drilled, screw the provided screws into
the holes you just drilled to secure the enclosure in place.
Figure 4
Figure 1 Figure 2
Figure 3


Produktspecifikationer

Varumärke: SSV Works
Kategori: högtalare
Modell: WP-RZO + 2
Förpackningens vikt: 4500 g
Förpackningens bredd: 150 mm
Djuppackning: 190 mm
Förpackningshöjd: 450 mm
Typ av förpackning: Doos

Behöver du hjälp?

Om du behöver hjälp med SSV Works WP-RZO + 2 ställ en fråga nedan och andra användare kommer att svara dig