Stairville C-Clamp Bruksanvisning
Stairville
Inte kategoriserad
C-Clamp
Läs gratis den bruksanvisning för Stairville C-Clamp (1 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 23 personer och har ett genomsnittsbetyg på 4.2 stjärnor baserat på 12 recensioner. Har du en fråga om Stairville C-Clamp eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/1
Thomann GmbH
Hans-Thomann-Str. 1 • 96138 Burgebrach
Germany • www.thomann.de
DocID: 171852_404343_08.02.19
EN
The C-clamp is intended for use on trusses with a tube diameter of 30 mm
to a maximum of 52 mm. Use the device only as described. Any other use
or use under other operating conditions is considered to be improper and
may result in personal injury or property damage. No liability will be as-
sumed for damages resulting from improper use.
Ensure that plastic bags, packaging, etc. are not within reach of
babies and young children. Choking hazard! Ensure that children
do not detach any small parts (e.g. knobs or the like) from the unit.
They could swallow the pieces and choke! Never let children unattended
use electrical devices.
Die tightening power of the C-clamp-bolt on the truss should be
about 20N. Do not keep using the C-clamp if it shows damages.
Check every 30 days, whether the C-clamp is still sitting rmly on the
truss. Tighten the screws again rmly if necessary. Make sure that the
C-clamp is not exposed to moisture for a longer period of time.
For the transport and protective packaging, environmentally
friendly materials have been chosen that can be supplied to normal
recycling. Ensure that plastic bags, packaging, etc. are properly dis-
posed of. Do not just dispose of these materials with your normal house-
hold waste, but make sure that they are collected for recycling. Please fol-
low the notes and markings on the packaging.
9C-clamp for stage lighting
950kg max. working load
9175mm × 90mm × 25mm
9also available in black
C-Clamp
50kg working load
Construction and mounting:
The C- clamp is made of 25mm × 6mm cold-rolled steel.
The truss protection spring is attached by two iron rivets at the C-clamp. A wing nut M10 x 25 is used to secure the
C-clamp to the truss.
For fastening of the lighting xture, a screw M10 × 35 is used with appropriate nut M10, a 10 mm at washer and a 10 mm
spring washer.
Produktspecifikationer
| Varumärke: | Stairville |
| Kategori: | Inte kategoriserad |
| Modell: | C-Clamp |
Behöver du hjälp?
Om du behöver hjälp med Stairville C-Clamp ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Stairville Manualer
10 September 2024
10 September 2024
9 September 2024
9 September 2024
8 September 2024
8 September 2024
8 September 2024
8 September 2024
8 September 2024
8 September 2024
Inte kategoriserad Manualer
- KDK
- Gridbyt
- Creda
- HyperIce
- Vakoss
- Carcomm
- BikeLogger
- Forza
- PSSO
- Code Corporation
- Sagem
- Vogue
- Ergie
- ESX
- Verizon
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025