Stanley FMCW210 Bruksanvisning
Läs nedan 📖 manual på svenska för Stanley FMCW210 (80 sidor) i kategorin Sander. Denna guide var användbar för 4 personer och betygsatt med 4.9 stjärnor i genomsnitt av 2.5 användare
Sida 1/80
www.stanley.eu
1
3
4
2
FMCW210
2
4
Charging
Fully Charged
Hot/Cold Pack Delay
Bad Battery
C
6
E
B
4
5
5a
A
4
4a
D
788
F
3
ENGLISH
(Original instructions)
2
2a
10
9
Intended use
Your Stanley Fat Max FMCW210 sander has been designed
for sanding wood, metal, plastics and painted surfaces. This
appliance is intended for professional and private, non profes-
sional users.
Safety instructions
General power tool safety warnings
@ Warning! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions listed below may result in electric shock,
re and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in all of the warnings listed below refers
to your mains operated (corded) power tool or battery oper-
ated (cordless) power tool.
1. Work area safety
a. Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
b. Do not operate power tools in explosive atmospheres,
such as in the presence of ammable liquids, gases
or dust. Power tools create sparks which may ignite the
dust or fumes.
c. Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
2. Electrical safety
a. Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs
with earthed (grounded) power tools. Unmodied plugs
and matching outlets will reduce risk of electric shock.
b. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock
if your body is earthed or grounded.
c. Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
d. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving
parts. Damaged or entangled cords increase the risk of
electric shock.
e. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
f. If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of
electric shock.
3. Personal safety
a. Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a
power tool while you are tired or under the inuence
of drugs, alcohol or medication. A moment of
inattention while operating power tools may result in
serious personal injury.
b. Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection
used for appropriate conditions will reduce personal
injuries.
c. Prevent unintentional starting. Ensure the switch is in
the off-position before connecting to power source
and/or battery pack, picking up or carrying the tool.
G H
Produktspecifikationer
| Varumärke: | Stanley |
| Kategori: | Sander |
| Modell: | FMCW210 |
Behöver du hjälp?
Om du behöver hjälp med Stanley FMCW210 ställ en fråga nedan och andra användare kommer att svara dig
Sander Stanley Manualer
16 September 2024
24 Augusti 2024
18 Augusti 2024
16 Augusti 2024
15 Augusti 2024
3 Augusti 2024
2 Augusti 2024
1 Augusti 2024
Sander Manualer
- Sander Gamma
- Sander Bort
- Sander McKenzie
- Sander Maestro
- Sander Makita
- Sander Toledo
- Sander Ferm
- Sander Duro
- Sander Herkules
- Sander Hitachi
- Sander Rikon
- Sander Einhell Bavaria
- Sander DeWalt
- Sander Westfalia
- Sander Silverline
Nyaste Sander Manualer
29 Mars 2025
29 Mars 2025
28 Mars 2025
28 Mars 2025
19 Februari 2025
17 Februari 2025
13 Februari 2025
12 Januari 2025
7 Januari 2025
2 Januari 2025