Star Micronics BSC10II-U Bruksanvisning
Star Micronics
Skrivare
BSC10II-U
Läs gratis den bruksanvisning för Star Micronics BSC10II-U (2 sidor) i kategorin Skrivare. Guiden har ansetts hjälpsam av 20 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 10.5 recensioner. Har du en fråga om Star Micronics BSC10II-U eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/2
For the owners of other companies’ trademarks mentioned in this document, see Trademarks in our website (https://www.star-m.jp/eng/trademarks.html).
Copyright 2024 Star Micronics Co., Ltd.
Windows
4
Preparing/Setting Up the Conguration App
Conguration app
download site
ⓘ
Driver download site for Mac / Linux environment (https://www.star-m.jp/supportsite-wsw.html)
Use the conguration app to set up the printer from the PC. Scan the QR code on the right side or search
the app to access the download site.
ⓘ
The following app cannot be used in Standard mode. When using in Standard mode, download the appropriate
software from the online manual.
The mode setting status can be checked from [Operation Mode] in the list that is printed at a self-printing.
For details about the self-printing procedure, refer to the online manual.
Download [BSC10 Installation CD].
Extract the downloaded software and execute “Autorun.exe”.
Follow the wizard instructions and complete software installation.
BSC10 Installation CD
ⓘ
The Windows driver is included in StarPRNT Intelligence for BSC10.
The StarPRNT Intelligence for BSC10 can be used to configure the printer settings and perform an operation test.
1
2
Turn on the power to the printer
, and check the blue LED lights
up
.
Connect the included power cable to the inlet on the back side of
the printer
. Connect the plug of the power cable to the outlet
.
3
Turning ON the Main Unit Power
3
4
5
5
4
1
1
Pull the end of the paper out straight
,
and push down both sides of the printer
cover to close
.
Insert a paper roll in the direction shown in
the illustration
.
Hook your ngers into the cover open
groove on both sides of the printer cover
,
and open the printer cover
.
2
Inserting a Paper Roll
2
To change the paper width, the memory
switch must be set. Refer to the online
manual for details.
ⓘ
When using a paper roll with 58 mm
width, install the supplied paper roll
guide into the printer.
3
Prepare a cable according to the terminal
that you will use. When using a commercially
available cable, perform thorough operation
verication in advance.
Connect the cable to the connector on the
printer.
Windows
USB-C
1
USB-C
®
USB cable *
1
PC: C to A or C to C
Communication
Plug for the printer:
1
1
Connecting a PC
*
1
Cable that conforms to USB2.0 standards.
If contents are missing or damaged, please contact the reseller that sold you the printer.
*
1
Accessories vary depending on the region where the printer was purchased.
*
2
Attached to the paper roll guide.
What's Included
BSC10II online manual
This document explains the setup procedures for the BSC10II.
For further instructions, please refer to the BSC10II online manual.
Please read the instructions before using the printer.
Introduction
Paper Roll GuidePower Cable *
1
Rubber Feet *
2
User’s Manual Sheet
This sheet
BSC10II-U
BSC10II
User's Manual Sheet
80870810
Produktspecifikationer
| Varumärke: | Star Micronics |
| Kategori: | Skrivare |
| Modell: | BSC10II-U |
Behöver du hjälp?
Om du behöver hjälp med Star Micronics BSC10II-U ställ en fråga nedan och andra användare kommer att svara dig
Skrivare Star Micronics Manualer
9 September 2025
4 September 2025
3 September 2025
3 September 2025
11 Augusti 2025
25 September 2024
25 September 2024
9 September 2024
4 September 2024
3 September 2024
Skrivare Manualer
- Citizen
- MSI
- Minolta
- Lenovo
- Sony
- Canon
- Paxar
- HiTi
- CSL
- Velleman
- Mount-It!
- Xiaomi
- Pantum
- Panasonic
- Elite Screens
Nyaste Skrivare Manualer
23 Oktober 2025
20 Oktober 2025
18 Oktober 2025
17 Oktober 2025
14 Oktober 2025
13 Oktober 2025
12 Oktober 2025
12 Oktober 2025
12 Oktober 2025
12 Oktober 2025