Star Micronics TUP592-24 Bruksanvisning

Star Micronics Etikettskrivare TUP592-24

Läs gratis den bruksanvisning för Star Micronics TUP592-24 (16 sidor) i kategorin Etikettskrivare. Guiden har ansetts hjälpsam av 16 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 8.5 recensioner. Har du en fråga om Star Micronics TUP592-24 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/16

TUP500

Quick Setup Guide

Thank you for choosing Star Micronics as your provider for printing solutions.

Unpacking the Unit

Contents

a. Printer

b. Paper Shaft

c. 1” Paper Core Adapter

d. 2” Paper Core Adapter

e. Shaft Weight*

f. Interface Mounting Screws(2)*

g. Paper Core Adapter Screws(4)

*Not Pictured

Assembly – Installing the Interface

Place the interface sub-assembly into the interface

slot as shown. Take care to be sure the interface

cartridge is seated properly into its connector.

Using a #2 Phillips screwdriver, install the mounting

screws located in back of the printer.

Interface Type…

Parallel

USB

Ethernet

Serial

Assembly – Paper Roll Setup

It is necessary to adjust the paper roll holder for the width of the paper you use. If the setting position is incorrect, the paper roll will

be supplied improperly to the mechanism which in turn causes paper transport problems. Thus, it is should be properly adjusted.

The following table shows the paper roll holder

and paper core inner diameter range.

Paper roll Holder

Types

Paper Core

Diameter Ranges

Paper roll Holder (1)

25.4 mm ± 1

Paper roll Holder (2)

50.8 mm ± 1

Paper roll Holder (3)

Optional

76.2 mm ± 1

Note 1) The unit is assembled for 1 inch paper cores

when shipped from the factory. Also, it is set for a

paper width of 82.5 ±0.5 (take-up width of 83 +0.5/-1)

when the printer is shipped from the factory.

Note

Roll Holder Size

Paper Thickness

1” or 25.4 mm

65 to 100 µm

2” or 50.8 mm

100 to 150 µm

3” or 76.2 mm

100 to 150 µm

“The size of the core

used is related to the

thickness of the paper

used.”

Produktspecifikationer

Varumärke:	Star Micronics
Kategori:	Etikettskrivare
Modell:	TUP592-24
Bredd:	160 mm
Djup:	234 mm
Höjd:	179 mm
Wi-Fi:	Nej
Maximal upplösning:	203 x 203 DPI
Certifiering:	CE, FCC, VCCI, EN55022
Kompatibla operativsystem:	Windows XP 32 Bit, Vista 32/64 Bit, Windows 7 32/64 Bit, Server 2008 32/64 Bit, XP Embedded, CE, POSReady 2009, OPOS, JavaPOS, USB Vendor Class, Linux, Mac OS X, StarIO SDK
Maximal rulldiameter:	150 mm
Valfri anslutning:	Ethernet
Skrivhastighet:	220 mm/sek
Inbyggda streckkoder:	CODABAR (NW-7), Code 39, Code 93, Code-128 Codabar Library, EAN13, EAN8, ITF, UPC-A, UPC-E
Produktens färg:	Silver
Temperatur vid drift:	0 - 50 ° C
Temperaturintervall (förvaring):	-20 - 60 ° C
Intervall för relativ operativ luftfuktighet:	10 - 90 %
Fuktighet (förvaring):	10 - 90 %
Anslutningsteknologi:	Kabel
Nätverksansluten (Ethernet):	Ja
Harmonized System (HS)-kod:	84433210
Utskriftsteknologi:	direkt termal
Media-tjocklek:	0.065 - 0.15 mm
Emulering:	Star Mode, ESC/POS
Stöds pappersbredd:	45, 82.5 mm
Automatisk sax hållbarhet:	1 miljoner skär
Automatisk sax:	Ja