StarIink Router Gen 3 Bruksanvisning

StarIink Router Router Gen 3

Läs gratis den bruksanvisning för StarIink Router Gen 3 (3 sidor) i kategorin Router. Guiden har ansetts hjälpsam av 19 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 10 recensioner. Har du en fråga om StarIink Router Gen 3 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/3
GEN 3 WIFI ROUTER
| GEN 3 ROUTER SETUP GUIDE (HIGH PERFORMANCE KIT)
Compatibility: High Performance Starlink Dish
3. Unplug your Gen 2 Router from the High Performance Power Supply, set aside.
1. Start by making sure your Starlink is set up and connected to the internet prior to setting up your Gen 3 Router.
Connect to your existing Starlink WiFi network from your device.
2. Unbox your Gen 3 Router Kit.
Setup
support.starlink.com
4. Plug the Gen 3 Router into a power outlet using the power cable and power supply.
Gen 3 Router
HP Cable
Gen 3 Router
Power Cable
Power SupplyStarlink Plug RJ45 CoverGen 3 Router
1.5 m
(4.92 ft)
1.5 m
(4.92 ft)
5. Plug the provided Starlink Gen 3 Router cable into port 1 on the router and the available port on the High Performance Power Supply.
support.starlink.com
6. On your device, find and connect to the STARLINK network in your WiFi settings.
7. You are now connected! The light on the Gen 3 Router should be solid white, and you can use the Starlink App
to customize additional settings, check your connection, and more.
White Line Yellow Line Red Line | Connected | Poor Signal | Disconnected

Produktspecifikationer

Varumärke: StarIink
Kategori: Router
Modell: Router Gen 3

Behöver du hjälp?

Om du behöver hjälp med StarIink Router Gen 3 ställ en fråga nedan och andra användare kommer att svara dig