StarTech.com DKT30CHVAUSP Bruksanvisning

Läs gratis den bruksanvisning för StarTech.com DKT30CHVAUSP (2 sidor) i kategorin Annat datortillbehör. Guiden har ansetts hjälpsam av 29 personer och har ett genomsnittsbetyg på 4.0 stjärnor baserat på 2 recensioner. Har du en fråga om StarTech.com DKT30CHVAUSP eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: December 2, 2019

Product Diagram (DKT30CHVAUSP)

Side View

Rear View

PortFunction

1VGA Output Port• Connect a VGA Display Device

2RJ45 Port• Connect a Network Cable

3USB-C Port

• Connect a USB-C Storage Device (e.g. ash drive),

or USB-C Peripheral Device

• Connect the Host Computer’s Power Adapter for

Power Delivery passthrough

4SD Card Slot• Connect an SD Card

5USB-A Ports

• Connect a USB-A Peripheral Device

• Charge a USB-A Peripheral

6HDMI Output Port• Connect an HDMI Display Device

7USB-C Host Connector• Connect to a Laptop or Computer

83.5 mm Audio Port• Connect an Audio Device with a 4-position jack

USB-C™ Multiport Adapter - 4K HDMI/VGA - SD™ - 2x USB-A/1x USB-C - 100W PD 3.0

Requirements

For the latest requirements and to view the full manual, please visit:

www.startech.com/DKT30CHVAUSP.

• Host Computer with USB-C Port

Installation

Powering the Multiport Adapter

USB Power Delivery 3.0 - Bus Power:

The Multiport Adapter is powered by the Host Computer’s USB-C Port and does not

require a separate power adapter. For power delivery passthrough follow these steps.

1. Connect the Multiport Adapter to a USB-C Port on the Host Computer using the

USB-C Host Connector.

2. Connect the USB-C Connector from the Host Computer’s Power Adapter to the

USB-C Port on the Multiport Adapter.

3. The Host Computer’s Power Adapter will power the Multiport Adapter and pass

power through to the Host Computer.

Windows 7 Driver Installation

1. Connect the Multiport Adapter to a USB-C Port on the Host Computer using the

USB-C Host Connector. The Found New Hardware pop-up will appear.

2. On the Found New Hardware pop-up, click the Cancel button.

3. Using a web browser, navigate to the StarTech.com website:

www.startech.com/DKT30CHVAUSP.

4. On the Product screen, click the Support tab.

5. In the Drivers and Downloads section, click on the driver link that corresponds with

the operating system running on the Host Computer.

6. Once the download is complete, extract the contents of the .Zip le.

7. Click the appropriate driver for the version of operating system that you are running

and follow the on-screen prompts to complete the installation.

1

2

3

4

5

6

7

8

Produktspecifikationer