StarTech.com PRIVACY-SCREEN-238M Bruksanvisning

Läs gratis den bruksanvisning för StarTech.com PRIVACY-SCREEN-238M (2 sidor) i kategorin Skärmfilter. Guiden har ansetts hjälpsam av 24 personer och har ett genomsnittsbetyg på 4.0 stjärnor baserat på 4 recensioner. Har du en fråga om StarTech.com PRIVACY-SCREEN-238M eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: June 10, 2021 10:08 AM

Product Diagram (PRIVSCNMONxx and PRIVACY-SCREEN-xx)

ComponentFunction

1Privacy Filter

• Privacy comes into eect when viewing

anywhere past 30 degrees from the left and

right of center

• Total eld of view of 60 degrees

2Mounting Tabs (x 5)

• Secure the Privacy Filter to the Monitor’s

surface

• The adhesive on the Mounting Tabs

becomes less eective with frequent removal/

reapplication

3

Adhesive Strips (not

displayed)

• Secure the Privacy Filter to the Monitor’s

surface

• The Adhesive Strips become less eective

with frequent removal/reapplication

Package Contents

• Privacy Screen x 1

• Set of Adhesive Strips x 1 (screens up to 27”) or x 2 (screens larger than 27”)

• Set of Mounting Tabs x 1

• Wiping Cloth x 1

• Quick Start Guide x 1

Requirements

For the latest requirements, please visit the following link and replace “xx” with the desired

privacy lter size / SKU:

www.startech.com/PRIVSCNMONxx

www.startech.com/PRIVACY-SCREEN-xx

Universal Privacy Filter

Install the Privacy Filter -- Adhesive Strips

For installations that are intended to be permanent, or if the Monitor does not feature

large Bezels, please use the Adhesive Strips.

1. Clean the Laptop Display and Bezels, using the Wiping Cloth.

2. Select the side of the Privacy Filter that is intended to face outward (i.e. matte or

glossy side) and place the Privacy Filter on a clean and at surface with the selected

side facing down.

3. Remove all the Adhesive Strips from the Transparent Lining.

Removing the Adhesive Strips

4. Carefully align the Adhesive Strips along the edges (top, bottom, left, and right) of

the Privacy Filter and ax to the Privacy Filter by applying rm pressure to all the

Adhesive Strips.

Applying the Adhesive Strips

5. Carefully remove the Protective Backing from the Adhesive Strips, exposing the

screen side adhesive.

Remove the Protective Backing from the Adhesive Strips

1

2/3

Produktspecifikationer