Steinberg 4Knob PopD Bruksanvisning
Steinberg
Inte kategoriserad
4Knob PopD
Läs gratis den bruksanvisning för Steinberg 4Knob PopD (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 10 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 5.5 recensioner. Har du en fråga om Steinberg 4Knob PopD eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/2

Pop D Manual
The 4 Knob Pop D is SampleTekk’s new and approved approach to sampled pianos. Its four sounds
and 88 presets provides you with a fast way of getting the sound you want for your production. The
four sounds and all presets in 4Knob Pop D are produced by SampleTekk’s Grammy winner and
several times Grammy nominee, Niklas Flyckt. During production several exclusive, vintage and very
sought-after hardware was used, such as:
•Telefunken ELAM 271
•Neumann M250
•Coles 4038
•Fairman TMEQ
•RCA BA-25A
•MXR Doubler
•Roland Dimension D
For the Reverb channel HALions built in REVerence is used, but with SampleTekk’s custom made
impulses made from different hardware reverb units, Spring reverb, plates and digital units. Some
of the impulses consists of a combination of several reverb types.
The Interface
The four main controls is where you set the blend. You can also mute and solo each sound.
Tip: When muting the sound, those samples are not triggered, so if you don’t use a particular sound,
rather than just pulling down the volume to zero, press the mute-button.
•Direct – The original piano signal
•Attitude
•Modulation
•Reverb

This is what you will see if you click the “Extended” button in the upper right corner of the control
panel:
From left to right:
•HB Volume — sets the volume of the hammerback sound (this is when the mechanics on the
piano return after releasing a key)
•Pedal Volume — sets the volume of the sustain pedal being pressed and released
•Sensitivity — turn clockwise to emphasis the higher velocities, counterclockwise for a more
mellow playing. This control is neutral when in 12 o’clock position
•Pre Delay — sets the pre delay of the reverb channel
•Size — sets the size of the reverb
•Time — sets the time of the reverb
•Ambience — sets the amount of room acoustic
•R — Turns on and off the Repedaling function. With this on, you can repeal sustain notes by
pressing down the sustain pedal directly after you have released it. In some occasions, you
might want to turn this off for a tighter sound
Produktspecifikationer
Varumärke: | Steinberg |
Kategori: | Inte kategoriserad |
Modell: | 4Knob PopD |
Behöver du hjälp?
Om du behöver hjälp med Steinberg 4Knob PopD ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Steinberg Manualer
23 Februari 2025
23 Februari 2025
21 Februari 2025
21 Februari 2025
21 Februari 2025
1 Februari 2025
1 Februari 2025
9 Januari 2025
9 Januari 2025
18 December 2024
Inte kategoriserad Manualer
- Samlex
- Allied Telesis
- Blow
- Artusi
- Sony Optiarc
- Leifheit
- SureFire
- Proel
- Baby Cakes
- SHX
- Naim
- Singer
- Breville
- Globo
- Bea-fon
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025