Steinberg 4Knob Rain Bruksanvisning
Steinberg
Inte kategoriserad
4Knob Rain
Läs gratis den bruksanvisning för Steinberg 4Knob Rain (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 9 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 5 recensioner. Har du en fråga om Steinberg 4Knob Rain eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/2
4Knob Rain Manual
The 4Knob Rain is the third release of SampleTekk’s new and approved approach to sampled pianos.
Its four sounds and 88 presets provide you with a fast way of getting the sound you want for your
production. The four sounds and all presets in 4Knob Rain are produced by SampleTekk’s Grammy
winner and several times Grammy nominee, Niklas Flyckt. During production several exclusive,
vintage and very sought-after hardware was used, such as:
• Fairman TMEQ
• RCA BA-25A
• MXR Doubler
• Roland Dimension D
For the Reverb channel HALion’s built in REVerence is used, but with SampleTekk’s custom made
impulses made from different hardware reverb units, Spring reverb, plates and digital units. Some
of the impulses consists of a combination of several reverb types.
The Interface
The four main controls are where you set the blend. You can also mute and solo each sound.
Tip: When muting the sound, those samples are not triggered, so if you don’t use a particular sound,
rather than just pulling down the volume to zero, press the mute-button.
•Direct – The original piano signal
•Attitude
•Modulation
•Reverb
This is what you will see if you click the “Extended” button in the upper right corner of the control
panel:
From left to right:
•HB Volume — sets the volume of the hammerback sound (this is when the mechanics on the
piano return after releasing a key)
•Pedal Volume — sets the volume of the sustain pedal being pressed and released
•Sensitivity — turn clockwise to emphasises the higher velocities, counterclockwise for a
more mellow playing. This control is neutral when in 12 o’clock position
•Pre Delay — sets the pre delay of the reverb channel
•Size — sets the size of the reverb
•Time — sets the time of the reverb
•Ambience — sets the amount of room acoustic
•R — Turn on or off the Repedaling function. With this on, you can repeat sustain notes by
pressing down the sustain pedal directly after you have released it. In some occasions, you
might want to turn this off for a tighter sound
Produktspecifikationer
| Varumärke: | Steinberg |
| Kategori: | Inte kategoriserad |
| Modell: | 4Knob Rain |
Behöver du hjälp?
Om du behöver hjälp med Steinberg 4Knob Rain ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Steinberg Manualer
23 Februari 2025
23 Februari 2025
21 Februari 2025
21 Februari 2025
21 Februari 2025
1 Februari 2025
1 Februari 2025
9 Januari 2025
9 Januari 2025
18 December 2024
Inte kategoriserad Manualer
- OP/TECH
- Whitestone
- Jysk
- Kostal
- Ergodyne
- Be Cool
- Brady
- FOX ESS
- Homak
- Primacoustic
- Statron
- Trotec
- Jonsered
- Hailo
- Lehle
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025