Stelton Brus Bruksanvisning
Läs gratis den bruksanvisning för Stelton Brus (20 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 24 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 12.5 recensioner. Har du en fråga om Stelton Brus eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/20
Brus
carbonator, wall mount
kulsyremaskine, væghængt
Wassersprudler, Wandhalterung
carbonateur, montage mural
2
EN – Brus carbonator, wall mount
M
A
X
M
I
N
Turning knob
Bottle socket / Pressure lock
CO
2
cartridge compartment
Bottle
Lid
Nozzle
Bottom cap
Release button
Wall mount
3
User instructions
Before using your Brus carbonator for the rst time, please
read the user and safety instructions in this manual.
EN – Brus carbonator, wall mount
Installation of the wall mount
1. Place the wall mount on the wall and mark the two drill holes
with a pen. Ensure the mount is level by using a spirit level.
2. Drill holes at the marked points and insert the plugs
provided (or appropriate plugs for your wall type).
3. Position the wall mount over the plugs and secure it using the
screws provided (or your own). Use a manual screwdriver to avoid
overtightening. Tighten screws only until the wall mount sits rmly, as
overtightening may cause issues when attaching the carbonator.
IMPORTANT:
Using the provided screws and plugs:
· Use the M4 pan head screws with collar included in the package.
· The provided plugs are suitable for concrete or brick walls. For other wall
types, ensure you purchase appropriate plugs for secure mounting.
Attaching the Wall-mounted carbonator
1. Firmly press it into the mount. You will hear a click, indicating that the
carbonator is properly attached.
The carbonator is now ready for use.
Detaching the Wall-mounted carbonator
1. Carefully grasp the carbonator by the CO
2
cartridge compartment.
2. Press and hold the release button to detach the carbonator from
the wall mount.
3. Pull the carbonator out from the wall mount.
Min. 120 mm
Min. 275 mm
Using Your Own Screws:
· If you choose to use your own screws,
select M4 or M5 at head screws with a
low-prole head, or pan head screws with
a collar, with a head height no greater
than 2.8 mm when installed in the bracket.
Produktspecifikationer
| Varumärke: | Stelton |
| Kategori: | Inte kategoriserad |
| Modell: | Brus |
Behöver du hjälp?
Om du behöver hjälp med Stelton Brus ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Stelton Manualer
3 Januari 2025
3 Januari 2025
3 Januari 2025
3 Januari 2025
6 December 2024
1 September 2024
Inte kategoriserad Manualer
- Greenworks
- Nesco
- Stamony
- Hayward
- Teka
- Vishay
- Sunbeam
- Disty
- Jupio
- Wago
- SHX
- Ziggo
- Portsmith
- Showtec
- Rio
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025