Summit Accucold PF1Kit Bruksanvisning

Summit Inte kategoriserad Accucold PF1Kit

Läs gratis den bruksanvisning för Summit Accucold PF1Kit (4 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 19 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 10 recensioner. Har du en fråga om Summit Accucold PF1Kit eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/4
PF1 Instructions R2
Power Failure Alarm Cord, Model PF1
INSTRUCTIONS
SAVE THIS MANUAL FOR FUTURE REFERENCE
This ACCUCOLD power-failure line
cord has a built in power failure -
sensor with a loud audible n 80dB
alarm. It is intended for monitoring
essential 120 volt AC powered
cord-
connected appliances for
power failure events
, accidental
cord disconnection
and circuit
breaker failure. The loud signal
sounds for up to 90 minutes,
advising the user
to reconnect
power to the device.
Key C omponents of the Power Failure Alarm Cord
15 Amp hospital grade - grounded three wire plug
Alarm housing with rechargeable battery
AC Power ON LED indicator
Grounded three- wire 15 Amp connector
Built-in switch that will silence the alarm when operated in the “alarm off” position
INSTALLATION
i. Attach the female connector to the plug of the appliance to be monitored.
ii. Plug the cord into any live 120 volt AC outlet.
Note: If the appliance plug is disconnected from the cord, the alarm will not sound. It will sound
only if power fails to reach the cord.
Summit Appliance Division, Felix Storch, Inc.
770 Garrison Ave Bronx, NY 10474 (718) 893 3900 Fax (844) 478 8799 Phone
║ ║www.summitappliance.com www.medicalrefrigerators.com
PF1


Produktspecifikationer

Varumärke: Summit
Kategori: Inte kategoriserad
Modell: Accucold PF1Kit

Behöver du hjälp?

Om du behöver hjälp med Summit Accucold PF1Kit ställ en fråga nedan och andra användare kommer att svara dig