Summit SPR489OSPNR Bruksanvisning
Summit
Inte kategoriserad
SPR489OSPNR
Läs gratis den bruksanvisning för Summit SPR489OSPNR (1 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 20 personer och har ett genomsnittsbetyg på 3.5 stjärnor baserat på 10.5 recensioner. Har du en fråga om Summit SPR489OSPNR eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/1
Summit Appliance Division · Felix Storch, Inc. · www.summitappliance.com · 718- -3900 · info@summitappliance.com 893
Instructions for Installing a Panel on your PNR Model
PNR Models: SPR489OSPNR/CSS
Your product is designed to accept custom overlay panels on the door frame.
Parts included in PNR kit:
(8) Screws to attach the custom panel
(1) Replacement top hinge
(1) Replacement bottom hinge
(2) Plastic bushing for panel
(2) Washers
Remove the door from the unit
1. Remove the door from its chassis by unscrewing the top and bottom hinges from the cabinet
and door. Save all of the screws for Step 10.
Attach the handle & panel
2. Attach your door handle to the panel using countersunk screws (not included). You can use the
handle that ships with this appliance or substitute your own.
3. Pull out the rubber gasket located around the inner door frame to access the eight screw holes
from the inside of the door.
4. Place your custom panel over the door pane.
5. Using the provided screws, attach the panel by holding it in place from the front and screwing it
onto the door pane from the inside of the door.
6. Reinstall the gasket to its original position.
Reattach the door
7. You will have to drill a hole into the top and bottom of the custom panel in order to connect it to
the new provided hinges. To do this, line the door up in its final position, using the new hinges
as a guide to mark where you will be drilling the holes. Drill a hole through the top and bottom
of the custom panel using a 23 64
⁄” drill bit.
8. Insert the provided bushing into the top and bottom holes of the panel.
9. For models with a lock, drill a 58
⁄” minimum keyhole in the door frame as illustrated above.
10. You can now reinstall the door using the replacement hinges.
Panel/Frame Dimensions:
Exterior ½ H x 18 W : 31 ”¾”
Overlay panel thickness: thick ¾”
Lock diameter (optional use): ⅝”
Note: the stainless steel door trim is 1 thick ¾”
Produktspecifikationer
| Varumärke: | Summit |
| Kategori: | Inte kategoriserad |
| Modell: | SPR489OSPNR |
Behöver du hjälp?
Om du behöver hjälp med Summit SPR489OSPNR ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Summit Manualer
29 September 2024
29 September 2024
29 September 2024
26 September 2024
26 September 2024
18 September 2024
18 September 2024
18 September 2024
18 September 2024
18 September 2024
Inte kategoriserad Manualer
- Aconatic
- Mobli
- META
- ECTIVE
- We-Vibe
- Neumann
- Brandt
- Hensel
- Synco
- Command
- Tristar
- Voodoo Lab
- Scarlett
- Yli Electronic
- Homematic IP
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025