Sun Joe 24V-HCSWP-CT Bruksanvisning

Sun Joe Sågmaskin 24V-HCSWP-CT

Läs gratis den bruksanvisning för Sun Joe 24V-HCSWP-CT (76 sidor) i kategorin Sågmaskin. Guiden har ansetts hjälpsam av 41 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 21 recensioner. Har du en fråga om Sun Joe 24V-HCSWP-CT eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/76

Original instructions.

A Division of Snow Joe, LLC Model 24V-HCSWP-CT Form No. SJ-24V-HCSWP-CT-880E-M

OPERATOR’S MANUAL

CORDLESS TELESCOPING

POLE + PRUNING SAW – TOOL ONLY

24V MAX* | 250W | 5" BAR + CHAIN LENGTH

*Initial no-load voltage, when fully charged, peaks at 24 volts;

nominal voltage under typical load is 21.6 volts.

SAVE THESE INSTRUCTIONS

IMPORTANT!

Safety Instructions

All Operators Must Read These

Instructions Before Use

Always follow these safety guidelines. Failure to do so may

result in serious bodily injury or death.

General Safety

WARNING! This appliance is not intended for use

by children or by unassisted, unsupervised persons whose

physical, sensory or mental capabilities prevent them from

using it safely. Children should be supervised to ensure that

they do not play with the appliance.

Before starting up your machine, please check it carefully for

any defects. If you nd any, do not start up your machine.

Contact your authorized Snow Joe

+ Sun Joe

dealer or

call the Snow Joe

+ Sun Joe

customer service center at

1-866-SNOWJOE (1-866-766-9563).

mWARNING! When using the power tool, basic safety

precautions should always be followed to reduce the risk of

re, electric shock, and personal injury. These include:

1. Keep work area clean and well-lit – Cluttered, dark

areas invite accidents. Always inspect the area where the

pole + pruning saw is to be used.

2. Avoid dangerous environments – Do not use the power

tool in rain, in damp or wet locations, or in bad weather,

especially when there is a risk of lighting. This decreases

the risk of being struck by lighting. Do not operate the

power tool in gaseous or explosive atmospheres or use

the power tool near ammable or combustible liquids.

Motors in these tools may spark, and the sparks might

ignite fumes.

3. Know your product – Know how to start and stop the

machine. Be thoroughly familiar with the controls.

4. Keep children, bystanders, and pets away –

All spectators, including pets, should be kept a safe

distance away from the work area.

5. Dress properly – Do not wear loose clothing or jewelry.

They can get caught in moving parts. Protective rubber

gloves and non-slip footwear are recommended when

working outdoors.

6. Avoid Slipping – Exercise caution to avoid slipping or

falling. Wear protective footwear that will protect your feet

and improve your footing on slippery surfaces.

7. Stay alert – Watch what you are doing. Use common

sense. Do not operate the power tool when you are tired,

or under the inuence of alcohol or drugs.

8. Do not overreach – Keep proper footing and balance at

xall times.

9. Prevent unintentional starting – Do not pull the trigger

before connecting to battery pack, picking up or carrying

the appliance. Do not carry the pole + pruning saw with

your nger on the trigger.

10.

Use the right appliance – Do not use the power tool for

any applications other than those for which it was intended.

11. The chain is sharp – Don't grasp the exposed chain or

cutting edges when picking up or holding the power tool.

12. Use two hands – Hold the telescoping pole and handle

with both hands to avoid loss of control.

13. Remove the battery – Remove the battery from the

power tool when it is not in use, before servicing it, when

changing accessories, and when performing any other

maintenance task.

14.

Use safety glasses – Also use safety footwear, snug-tting

clothing, protective gloves, hearing and head protection.

15. Use head protection – Always use head protection when

operating the power tool overhead. Falling debris can

result in serious personal injury.

16. Do not force the tool – It will perform better with less

likelihood of personal or mechanical injury if it is used at

the rate for which it was designed.

17. Check for damaged parts – Before further use of the

appliance, all guards and parts should be carefully

checked to determine that it will operate properly and

perform its intended function. Check for alignment of

moving parts, binding of moving parts, breakage of parts,

mounting, and any other condition that may aect its

operation. A guard or other part that is damaged should

be properly repaired or replaced. Contact the Snow Joe

+ Sun Joe

customer service center at 1-866-SNOWJOE

(1-866-766-9563) for assistance.

18. Maintain the power tool with care – Keep the cutting

edges sharp and clean for optimal performance and to

reduce the risk of injury. Keep the handles dry, clean,

and free from oil and grease. Follow the additional

recommendations described in the maintenance section

of this manual.

Produktspecifikationer

Varumärke:	Sun Joe
Kategori:	Sågmaskin
Modell:	24V-HCSWP-CT
Färg på produkten:	Zwart
Vikt:	265 g
Snäll:	Stabilisator voor sportactiecamera's
Laddningstid:	2 uur
Batterikapacitet:	1500 mAh
Batteri/Batterispänning:	3.7 V
Drifttid:	2.5 uur
Bildstabilisator:	Ja
Megapixlar:	- MP
Inbyggt batteri:	Ja
USB-laddningsport:	Ja
Kompatibla produkter:	HERO 5/4
Rotationsvinkel:	70 °
Panoreringsintervall:	0 - 360 °
Sväng:	Ja
Driftspänning:	3.7 V
Tiltvinkelområde:	0 - 360 °
Batteriteknik:	Lithium
Luta steg:	1.5 - 150 °/sec
Panoreringssteg:	1.5 - 270 °/sec