Sun Joe 24V-X2-LS6T-CT Bruksanvisning
Läs gratis den bruksanvisning för Sun Joe 24V-X2-LS6T-CT (44 sidor) i kategorin Vedklyver. Guiden har ansetts hjälpsam av 22 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 11.5 recensioner. Har du en fråga om Sun Joe 24V-X2-LS6T-CT eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/44
Original instructions.
© 2022 Snow Joe, LLC. All rights reserved.
A Division of Snow Joe, LLC Model 24V-X2-LS6T-CT Form No. SJ-24V-X2-LS6T-CT-880E-MR1
R
OPERATOR’S MANUAL
1
EN
CORDLESS HYDRAULIC LOG SPLITTER
– TOOL ONLY
48V MAX* | 20.5" x 10" MAX LOG SIZE
*Generates 48V max with two 24V lithium-ion batteries. Initial no-load voltage,
when fully charged, peaks at 24V; nominal voltage under typical load is 21.6V.
SAVE THESE INSTRUCTIONS
IMPORTANT!
Safety Instructions
All Operators Must Read These
Instructions Before Use
Always follow these safety guidelines. Failure to do so may
result in serious bodily injury or death.
General Safety
m
WARNING! This machine is not intended for use
by children or by unassisted, unsupervised persons whose
physical, sensory or mental capabilities prevent them from
using it safely. Children should be supervised to ensure that
they do not play with the machine.
Before starting up your log splitter, please check it carefully
for any defects. If you find any, do not start up your machine.
Instead, contact your authorized Snow Joe
®
+ Sun Joe
®
dealer
or call the Snow Joe
®
+ Sun Joe
®
customer service center at
1-866-SNOWJOE (1-866-766-9563).
mWARNING! When using the log splitter, basic safety
precautions should always be followed to reduce the risk of
fire, electric shock, and personal injury. These include:
• Stay alert – Watch what you are doing. Use common
sense. Do not operate the machine when you are tired or
under the influence of drugs, alcohol, or other medication.
Never leave a running machine unattended.
• Know your machine – Know how to start and stop the
machine. Make sure that all controls and safety features
are in place and functioning properly. Only use your hands
to operate the controls.
• Avoid unintentional starting – Ensure the power button
is in the off-position (not pressed) before installing the
battery packs, or picking up or carrying the machine.
Transporting the machine with your finger on the power
button or energizing the machine while the power button
is pressed may lead to accidents.
• Usage – Do not use this log splitter for any job except for
what it’s intended for.
• Moving parts – Keep hands and feet away from moving
parts and partially split logs during operation. Contact with
moving parts may result in injury.
• Personal protective equipment – Always wear safety
glasses and gloves while operating the machine.
• Dress properly – Do not wear loose clothing or jewelry as
such articles can become caught in moving parts. Tie up
long hair.
• Avoid slipping – Maintain proper footing and balance
at all times to avoid slipping or falling. Wear non-slip
footwear to improve your footing on slippery surfaces.
• Avoid water – Do not use the log splitter in rain or in
damp or wet locations. Do not allow water or any other
liquids to get on the machine.
• Noise and vibrations – If the log splitter should start
to vibrate abnormally, stop the machine and inspect it
thoroughly for damage.
• One-person operation – Only one person should operate,
load or unload the log splitter at any given time.
Log Splitting
• Operator zone – Operate the log splitter from the
operator zone to reduce the risk of injury (Fig. A).
• Logs – Do not split oversized logs. Always split in the
direction of the grain. Ensure that the logs are cut as
square as possible and are free of protruding limbs.
• Splitting non-squared-off logs – When splitting logs that
were not cut square, place the tapered end towards the
splitting wedge and rotate the log so that the tip of the
tapered end faces down before attempting to split it.
• Foreign objects – Do not split logs that may contain
foreign objects such as nails, wires or bullets.
• Overload – Do not overload the log splitter or attempt to
split more than one log at a time, unless the log pusher
has been fully extended and a second log is needed to
complete the separation of the first log. If a log has not
split after 5 seconds, stop the machine and remove the
log.
Fig. A
Operator zone
Produktspecifikationer
| Varumärke: | Sun Joe |
| Kategori: | Vedklyver |
| Modell: | 24V-X2-LS6T-CT |
Behöver du hjälp?
Om du behöver hjälp med Sun Joe 24V-X2-LS6T-CT ställ en fråga nedan och andra användare kommer att svara dig
Vedklyver Sun Joe Manualer
10 September 2024
10 September 2024
23 Augusti 2024
23 Augusti 2024
11 Augusti 2024
10 Augusti 2024
6 Augusti 2024
5 Augusti 2024
1 Augusti 2024
29 Juli 2024
Vedklyver Manualer
- Scheppach
- Texas
- Powerhouse
- Atika
- Remington
- Al-ko
- Cocraft
- Anova
- Ryobi
- Zipper
- Wallenstein
- Cotech
- Gamma
- Fieldmann
- Einhell
Nyaste Vedklyver Manualer
18 Oktober 2024
6 Oktober 2024
2 Oktober 2024
30 September 2024
26 September 2024
26 September 2024
26 September 2024
26 September 2024
24 September 2024
20 September 2024