Sun Joe BDL-A0201 Bruksanvisning
Läs gratis den bruksanvisning för Sun Joe BDL-A0201 (80 sidor) i kategorin Sågmaskin. Guiden har ansetts hjälpsam av 11 personer och har ett genomsnittsbetyg på 3.6 stjärnor baserat på 6 recensioner. Har du en fråga om Sun Joe BDL-A0201 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/80
© 2021 by Snow Joe
®
, LLC
All rights reserved. Original instructions.
1
SAVE THESE INSTRUCTIONS
EN
A Division of Snow Joe
®
, LLC
R
OPERATOR’S MANUAL
Model 24V-X2-CS16 Form No. SJ-24V-X2-CS16-880E-MR3
CORDLESS CHAIN SAW
48-VOLT MAX* | 2.0 Ah | 16-INCH
IMPORTANT!
Safety Instructions
All Operators Must Read These
Instructions Before Use
Read all safety warnings and all instructions. Failure to follow
the warnings and instructions may result in electric shock, re
and/or serious injury. Save all warnings and instructions for
future reference.
mDANGER! This indicates a hazardous situation, which,
if not followed, will result in serious injury or death.
mWARNING! This indicates a hazardous situation, which,
if not avoided, could result in serious injury or death.
mCAUTION! This indicates a hazardous situation, which,
if not avoided, could result in minor or moderate injury.
Intended Use
This cordless chain saw was designed and manufactured for
trimming and pruning tree limbs and branches and for cutting
smaller logs up to recommended 14.5 inch (36.8 cm), not to
exceed a max. cut of 15.5 in. (39.4 cm) in diameter depending
on type of wood. All of the wooden objects intended to be cut
with this chain saw should be no thicker than the guide bar's
maximum cutting capabilities.
Improper Use
Any other use diering from the above mentioned applications
poses a serious hazard to the user and may damage both the
tool and your personal property. Examples of improper use
include, but are not limited to:
• Trimming hedges;
• Carving;
• Sectioning pallets, crates, and various packing materials;
• Sectioning furniture or other materials with nails, screws, or
other metal components;
• Butchering meat;
• Using the machine to lift, move, or split objects;
• Using the machine while fastened to xed supports.
Improper use of the machine will invalidate the warranty,
relieve the manufacturer from all liabilities. The user will
consequently be liable for all and any damage or injury to
himself/herself or others.
General Safety
mWARNING! When using cordless yard tools, basic
safety precautions should always be followed to reduce the
risk of re, electric shock, and personal injury, including
the following:
Work Area Safety
1. Keep work area clean and well lit – Cluttered or dark
areas invite accidents.
2. Do not operate power tools in explosive atmospheres,
such as in the presence of ammable liquids, gases
or dust – Power tools create sparks which may ignite the
dust or fumes.
3. Keep children and bystanders away while operating a
power tool – Distractions can cause you to lose control.
Electric Safety
1. Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodied plugs and
matching outlets will reduce risk of electric shock.
2. Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators – There is an increased risk of electric shock
if your body is earthed or grounded.
3. Do not expose power tools to rain or wet conditions
– Water entering a power tool will increase the risk of
electric shock.
4. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk of electric
shock.
5. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
6. If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of
electric shock.
Produktspecifikationer
| Varumärke: | Sun Joe |
| Kategori: | Sågmaskin |
| Modell: | BDL-A0201 |
Behöver du hjälp?
Om du behöver hjälp med Sun Joe BDL-A0201 ställ en fråga nedan och andra användare kommer att svara dig
Sågmaskin Sun Joe Manualer
7 Januari 2025
31 December 2025
31 December 2025
27 Oktober 2024
14 September 2024
11 September 2024
7 September 2024
4 September 2024
3 September 2024
24 Augusti 2024
Sågmaskin Manualer
- Tacklife
- Hazet
- Worx
- Erbauer
- Vulcan
- Jonsered
- Turbo-Silent
- Texas
- Black Decker
- Dremel
- Hitachi
- MTM
- Duro
- Bosch
- Proxxon
Nyaste Sågmaskin Manualer
3 April 2025
3 April 2025
1 April 2025
1 April 2025
1 April 2025
1 April 2025
1 April 2025
1 April 2025
29 Mars 2025
29 Mars 2025