Sunbeam SB8300 Bruksanvisning

Sunbeam Järn SB8300

Läs gratis den bruksanvisning för Sunbeam SB8300 (2 sidor) i kategorin Järn. Guiden har ansetts hjälpsam av 27 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 14 recensioner. Har du en fråga om Sunbeam SB8300 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/2
1
Opening
Support the ironing board in the vertical
position and lift the release lever. Allow the
top leg to drop to the floor while lowering the
board until horizontal.
Adjusting the height
To increase the height of the board, lift the
release lever slightly and pull the board
upward to the desired height setting. To lower
the height, lift the release lever slightly and
gently push downwards on the board until the
desired height setting is reached.
Closing
Ensure that the iron rest is stowed under the
board before closing. To close, raise the rear
of the board (nearest the iron rest) while
lifting the release lever, allowing the rear legs
to rise and the to board swing into the
vertical position.
Using the retractable iron rest
To use the iron rest, slide it out from
underneath the board so that the rest is fully
extended. When you have finished ironing,
push the iron rest firmly back into position
underneath the board before storing.
Fitting the cover
Pull tightly on the drawstring to tighten the
cover. Press the toggle and slide it towards
the board to tighten. Release to lock in
position.
Caring for the cover
The cotton cover has been treated with
Teflon
®
Fabric Protector from DuPont. Water
rolls off and stains just wipe away. Teflon
®
provides maximum water and stain
repellency, but still allows the fabric to
breathe. A heat treatment (warm ironing or
tumble drying) will optimize the performance
of Teflon
®
. Warm machine wash on a gentle
cycle. Line or tumble dry. Do not dry clean.
To keep the cover’s shape, fit to the board
while still damp and iron dry.
Operating Instructions for your
ironing board


Produktspecifikationer

Varumärke: Sunbeam
Kategori: Järn
Modell: SB8300

Behöver du hjälp?

Om du behöver hjälp med Sunbeam SB8300 ställ en fråga nedan och andra användare kommer att svara dig