Supermicro SuperChassis SC812L-520C Bruksanvisning
Supermicro
Computerbehuizing
SuperChassis SC812L-520C
Läs gratis den bruksanvisning för Supermicro SuperChassis SC812L-520C (52 sidor) i kategorin Computerbehuizing. Guiden har ansetts hjälpsam av 14 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 7.5 recensioner. Har du en fråga om Supermicro SuperChassis SC812L-520C eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/52
SC812L CHASSIS SERIES
SUPER
USER’S MANUAL
1.0
SC812L-520U SC812L-280U
SC812L-520 SC812L-420
SC812L-520C SC812L-420C
SC812L-410
SC812L-U
SC812L
SC812L Chassis Manual
ii
The information in this User’s Manual has been carefully reviewed and is believed to be accurate.
The vendor assumes no responsibility for any inaccuracies that may be contained in this document,
makes no commitment to update or to keep current the information in this manual, or to notify any
person or organization of the updates. Please Note: For the most up-to-date version of
this manual, please see our web site at www.supermicro.com.
SUPERMICRO COMPUTER reserves the right to make changes to the product described in this
manual at any time and without notice. This product, including software, if any, and documenta-
tion may not, in whole or in part, be copied, photocopied, reproduced, translated or reduced to any
medium or machine without prior written consent.
IN NO EVENT WILL SUPERMICRO COMPUTER BE LIABLE FOR DIRECT, INDIRECT, SPECIAL,
INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE
OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, THE VENDOR SHALL NOT HAVE
LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE
PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING
OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of Santa
Clara County in the State of California, USA. The State of California, County of Santa Clara shall
be the exclusive venue for the resolution of any such disputes. Supermicro's total liability for all
claims will not exceed the price paid for the hardware product.
Manual Revision 1.0
Release Date: May 7, 2007
Unless you request and receive written permission from SUPER MICRO COMPUTER, you may not
copy any part of this document.
Information in this document is subject to change without notice. Other products and companies
referred to herein are trademarks or registered trademarks of their respective companies or mark
holders.
Copyright © 2007 by SUPER MICRO COMPUTER INC.
All rights reserved.
Printed in the United States of America
iii
Preface
Preface
About This Manual
This manual is written for professional system integrators and PC technicians. It
provides information for the installation and use of the SC812L chassis. Installation
and maintenance should be performed by experienced technicians only.
Supermicro’s SC812L 1U chassis features a unique and highly-optimized design
for dual-core Xeon platforms. The chassis is equipped with a high effi ciency power
supply for superb power savings. High performance cooling blowers provide ample
optimized cooling.
This document lists compatible parts available when this document was published.
Always refer to the our Web site for updates on supported parts and confi gura-
tions.
Produktspecifikationer
| Varumärke: | Supermicro |
| Kategori: | Computerbehuizing |
| Modell: | SuperChassis SC812L-520C |
Behöver du hjälp?
Om du behöver hjälp med Supermicro SuperChassis SC812L-520C ställ en fråga nedan och andra användare kommer att svara dig
Computerbehuizing Supermicro Manualer
29 December 2024
29 December 2024
29 December 2024
29 December 2024
29 December 2024
29 December 2024
29 December 2024
29 December 2024
29 December 2024
29 December 2024
Computerbehuizing Manualer
- Cougar
- Logic
- Krux
- SilentiumPC
- DeepCool
- Icy Box
- Intel
- Enermax
- Genesis
- 3M
- Montech
- Xigmatek
- AeroCool
- Cooler Master
- Advantech
Nyaste Computerbehuizing Manualer
9 April 2025
7 April 2025
5 April 2025
3 April 2025
1 April 2025
1 April 2025
1 April 2025
30 Mars 2025
30 Mars 2025
29 Mars 2025