Supermicro X10SDV-2C-TP4F Bruksanvisning
Supermicro
ej kategoriserat
X10SDV-2C-TP4F
Läs gratis den bruksanvisning för Supermicro X10SDV-2C-TP4F (124 sidor) i kategorin ej kategoriserat. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 1.5 recensioner. Har du en fråga om Supermicro X10SDV-2C-TP4F eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/124

X10SDV
Flex ATX Series
USER’S MANUAL
1.0c

The information in this user’s manual has been carefully reviewed and is believed to be accurate.
The vendor assumes no responsibility for any inaccuracies that may be contained in this document,
and makes no commitment to update or to keep current the information in this manual, or to notify
any person or organization of the updates. Please Note: For the most up-to-date version of this
manual, please see our website at www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product
described in this manual at any time and without notice. This product, including software and docu-
mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.
Any use or reproduction of this product is not allowed, except as expressly permitted by the terms
of said license.
IN NO EVENT WILL SUPER MICRO COMPUTER, INC. BE LIABLE FOR DIRECT, INDIRECT,
SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE
USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER, INC.
SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED
WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,
INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between the manufacturer and the customer shall be governed by the laws of
Santa Clara County in the State of California, USA. The State of California, County of Santa Clara
shall be the exclusive venue for the resolution of any such disputes. Supermicro's total liability for
all claims will not exceed the price paid for the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class
A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the manufacturer’s instruction manual, may cause harmful
interference with radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference, in which case you will be required to correct the interference at your
own expense.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate
warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate
Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”.
WARNING: Handling of lead solder materials used in this
product may expose you to lead, a chemical known to
the State of California to cause birth defects and other
reproductive harm.
Manual Revision: 1.0c
Release Date: December 11, 2019
Unless you request and receive written permission from Super Micro Computer, Inc., you may not
copy any part of this document.
Information in this document is subject to change without notice. Other products and companies
referred to herein are trademarks or registered trademarks of their respective companies or mark
holders.
Copyright © 2019 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America
Produktspecifikationer
Varumärke: | Supermicro |
Kategori: | ej kategoriserat |
Modell: | X10SDV-2C-TP4F |
Bredd: | 228.6 mm |
Djup: | 184.2 mm |
Wi-Fi: | Nej |
Internminne: | - GB |
Maximalt internminne: | 128 GB |
Trusted Platform Module (TPM): | Ja |
RAID-stöd: | Ja |
Minnesspänning: | 1.2 V |
Antal processorer som stöds: | 1 |
Minnestyper som stöds: | DDR4-SDRAM |
BIOS-typ: | AMI |
ACPI-version: | 5.0 |
processortillverkare: | Intel |
Antal LAN (RJ-45) anslutningar: | 4 |
Temperatur vid drift: | 0 - 60 ° C |
processorsockel: | BGA 1667 |
Hållbarhetscertifiering: | RoHS |
Nätverksansluten (Ethernet): | Ja |
Antal USB 2.0 anslutningar: | 5 |
RAID-nivåer: | 0, 1,5, 10 |
Minneskanaler: | Dubbla kanaler |
Minnets hastigheter: | 1600,1866 MHz |
Antal USB 3.2 Gen 1 (3.1 Gen 1) typ A-portar: | 2 |
BIOS minnesstorlek: | 128 mbit |
Moderkort formfaktor: | Flex-ATX |
Kvalitet på VGA (D-Sub) porten: | 1 |
Lagringsenhetsgränssnitt som stöds: | SATA III |
Trusted Platform Module (TPM)-version: | 2.0 |
Antal SATA III kontakter: | 4 |
Antalet DIMM-platser: | 4 |
Som stöds DIMM-modul kapacitet: | 4GB, 8GB, 16GB, 32GB |
Antal COM portar: | 1 |
PCI Express x4 (Gen 3.x)-kortplatser: | 1 |
PCI Express x8 (Gen 3.x)-kortplatser: | 2 |
Maximalt RDIMM minne: | 128 GB |
Maximalt UDIMM minne: | 64 GB |
IPMI LAN (RJ-45)-port: | Ja |
Processor antal kärnor som stöds: | 2 |
Behöver du hjälp?
Om du behöver hjälp med Supermicro X10SDV-2C-TP4F ställ en fråga nedan och andra användare kommer att svara dig
ej kategoriserat Supermicro Manualer
12 September 2025
12 September 2025
12 September 2025
12 September 2025
12 September 2025
12 September 2025
12 September 2025
12 September 2025
12 September 2025
12 September 2025
ej kategoriserat Manualer
- Homedics
- LOKUKA
- Japannext
- Baby Lock
- Viewsonic
- Seal Shield
- Creality
- Thor
- IXTECH
- Genaray
- Snakebyte
- Salton
- Ergobaby
- Miditech
- Heat Seal
Nyaste ej kategoriserat Manualer
12 September 2025
12 September 2025
12 September 2025
12 September 2025
12 September 2025
12 September 2025
12 September 2025
12 September 2025
12 September 2025
12 September 2025