Svan SVVE41R Bruksanvisning

Svan Fläkt SVVE41R

Läs gratis den bruksanvisning för Svan SVVE41R (2 sidor) i kategorin Fläkt. Guiden har ansetts hjälpsam av 15 personer och har ett genomsnittsbetyg på 3.7 stjärnor baserat på 8 recensioner. Har du en fråga om Svan SVVE41R eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/2

(PLEASE READ THIS USER'S MANUAL THROUGHLY BEFORE USING)

• Safety Instruction:

1. Never put your nger or other something into the cover to avoid any hurts.

2. Make sure to keep the fan far away from humidity, chemical articles and oil.

3. While cleaning, be sure to not splash water and do not use oil, alcohol or chemica

articles as they may cause distortion of fan body and cause electrical hazards.

4. Do not pull out the power supply plug by pulling power supply cord, which may lead to

electrical shock or generating electrical shock.

5. Keep away from curtain, clothing or other something may aect the fan's working.

6. Turn o all switches and pull out power supply plug when you go out for long time.

7. Never use the fan before nishing assembly to avoid any hurts.

8. If the supply cord is damaged, it must be repaired by the manufacture or its service

agent or a similarly qualied in order to avoid a hazard.

9. Before sending for maintaining, if the unit doesn't work please check the plug of power

supply has been inserted into socket with electricity.

10. Do not use the electric fan in rai n.

INSTRUCTION MANUAL

Stand Fan

SVVE16P41

SVVE41R

• Stucture Diagram

1. Shroud Ring 9. Back Pane

2. Front Cove 10. Screw

3. Fastener for Fan blade 11. Up-Down Tube

4. Fan Blade 12. External Joint

5. Fastener for Cover 13. Support Tube

6. Back Cover 14. Decorative Cover

7. Output shaft 15. Round Base/Cross base

8. Joint

• Installing and Using

First step: Assemble and connect the base with assembly up-down tube and

support tube.

Open the casing and take out base. Then assemble the tube and cover of up-down tube

and support tube. Aim the four holes on the bottom of support tube at the holes on the

base and tighten the screws. Slip decorative cover to base alongside the tube of support

tube and adjust up-down tube to proper height. Then rotate tighten the external joint.

Second step: Assemble fan blade

1) Assemble guard cover and shroud ring

Tighten back cover enclosure io the motor by Fastener. (Pay attention to direction of

rotation). Place joint of shroud ring downwards and cover the deep groove of shroud ring

to the circle side ring of back cover enclosure. Then tighten the bolts at the position of join

properly by nut.

2) Install fan blade

While installing fan blade, please wedge groove on the back of fan blade on spacer pin o

the output shaft of motor. Then tighten the xing nut of fan blade unclockwisely.

3) Assemble front cover

Insert the circle of front cover into the groove of shroud ring, which has been xed to the

back cover. Finally fasten the bolts into screw of the joint of shroud ring.

• Direction of Use

1. Setting of wind direction

This fan can swing in up and down direction. The angle of facing upwards and downwards

can be adjusted by slightly lift or press the cover.

2. Setting of shaking

Press the turning button and the head starts to rotate. Then pull it out and fan will stop

rotating.

3. Setting of wind speed and wind type

Pressing button of wind speed can adjust the speed of wind.

• Solution to Simple Failure

When starting the fan, the fan blade doesn't work. Please check whether the power plug

has really inserted into the socket or the cover has distorted, which has touched the fan

blade. If sound the noise when starting the fan, please check the unit as follows:

(1) Fan blade has been right installed into the output shaft of motor.

(2) Groove on back of cover has matched the inserting groove on the output shaft.

(3) There tiny defective edge ring existing around the fan blade. is

(4) The cover has distorted, which has touched the fan blade.

* Maintaining and Storing

Be sure to switch o the power supply and pull out the plug before cleaning.

1. This machine only needs common external cleaning and wiping.

2. Place into casing and store in the dry position.

• Technical Parameters

Model

Rating

Voltage

Rating

Power

Rating

Frequency

Remark

SVVE16P41

SVVE41R

220 240V-

50W

50Hz

Base

SVAN TRADING S.L.

C/Ciudad de Cartagena, 20. Paterna (46988). SPAIN.

info@svanelectro.com

96060034

Produktspecifikationer

Varumärke:	Svan
Kategori:	Fläkt
Modell:	SVVE41R
Färg på produkten:	Zwart
Vikt:	2 g
Bredd:	15 mm
Djup:	19 mm
Höjd:	7 mm
LED-indikatorer:	Ja
Wi-Fi-standarder:	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Bluetooth-version:	4.0
Anslutningsteknik:	Bedraad
Certifiering:	CE, FCC
USB-version:	2.0
Gränssnitt:	WLAN / Bluetooth
Modulation:	16-QAM, 64-QAM, BPSK, CCK, DSSS, OFDM
Wifi-band:	Single-band (2.4 GHz)
WiFi-standard:	Wi-Fi 4 (802.11n)
Mottagarens känslighet:	802.11b: -81 dBm (typical) 11Mbps\n802.11g: -67 dBm (typical) 54Mbps\n802.11n: -66 dBm (typical) 150Mbps
Nätverksstandard:	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Säkerhetsalgoritmer som stöds:	64-bit WEP, 128-bit WEP, WPA, WPA-PSK, WPA2, WPA2-PSK
Stöder Windows:	Windows 10, Windows 7, Windows 8, Windows 8.1, Windows Vista
Internera:	Nee
Stöder Mac-operativsystem:	Ja
WLAN-dataöverföringshastigheter som stöds:	11, 54, 150 Mbit/s
Frekvensomfång:	2.4 - 2.483 GHz
Snabbinstallationsguide:	Ja
Värdgränssnitt:	USB
Maximal dataöverföringshastighet:	150 Mbit/s
Antenn:	Ja
Wifi:	Ja
Strömförbrukning (typiskt):	0.61 W
Drifttemperatur (TT):	0 - 40 °C
Relativ luftfuktighet i drift (VV):	0 - 90 procent
Harmoniserad systemkod (HS):	85176990
Antenndesign:	Intern